Adhesives Gum Dealers in Surat

• Application: Tiles Use
• Adhesive Side: Single Sided
• Feature: Heat Resistant
• Feature: Polymer Based Adhesive
• Packing: Superior Tile Adhesive is supplied in 20 kgs sacks.
• Shelf Life: 6 months if stored in packed condition

Polymer Based Adhesive for Fixing Tile Superior Tile Adhesive is a grey powder which consists of blend of Portland cements, special cements, polymers and fillers. Superior Tile Adhesive Is A Polymer Based Adhesive For Fixing Tile.Advantages : No soaking of tiles required. Tiles can go directly from box to the wall minimising breakages during soaking and extra labour. Unmatched vertical Adhesion strength upto 8 feet No curing is required as Superior Tile Adhesive paste is self curing type. Surface to be tiled does not need hacking or mechanical key as Superior Tile Adhesive can be applied on smooth plastered surface also. Superior Tile Adhesive waterproofs the tiled surface. Application : Mix the powder and water in the volumetric proportion of 2.5 to 3 volumes of powder to one volume of water. Thoroughly mix to form a creamy paste. Apply this paste behind the tile or surface to be tiled and press the tile in position firmly. An adhesion thickness of 3mm is enough to create a good bond. Coverage  : On a smooth even surface Superior Tile Adhesive gives a coverage of 2.5 square feet per kg. approximately for 3mm thickness.

• Color: Grey
• Application: Tile Fixing
• Feature: Antistatic, Heat Resistant, Holographic, Waterproof
• Type: Ceramic Tile Adhesives
• Country of Origin: India
• Form: Powder
• Powder Ratio: 1:3 Ratio

Benefits Easy to use « Prepacked & ready to use « Needs no post treatment * Excellent adhesions hence eliminate shrinkage. » Excellent * waterproofing characteristics. How to Use The surface should be cleaned and free from dirt and oil before using “TILE MALTA” The surface must be plumb before application of “TILE MALTA” adhesive. Mixing Take 25kg Bag of “TILE MALTA’ and add water 4.75 liter (@19%) and mix for minimum 3 minutes. Till homogeneous paste is obtained. Hand mixing is recommended for small quantities only. Mix as much quantity which can be used within 30 minutes. Tiling “TILE MALTA’ Paste is used in 3-6 mm thickness comb with notched trowel. Keep joints between two tiles using spacers. Start placing the tiles on the surface at tube tiled. Take the tile properlyto sure complete overage of the back side of tile and to eliminate the possibility of any air voids. Start filling joints only after 24hrs. Technical Detail Appearance — Powder + Color — Grey + Water/Powder Ratio — 1:3 * Pot life — 90 min. * Hard Dry — 24 hrs. Coverage 6-7 m7/3 m.m thickness. Precaution and Limitation For laying tiles on floor surface should be sufficiently hard and good condition. * Don't add excess water than recommended. + Always add powder to water and never add water to powder. * Never add cement and sand at site. * Itis advisable not to use on gypsum plaster, paint, wood and metal.

• Country of Origin: India
• Type: Fabric Glue
• Application: Fabric
• Color: White
• Feature: Durable, Waterproof
• Form: Liquid
• Packaging Type: Bottel, Drum, Plastic Tube, Cone
• Packaging Size: 30 Ml
• Brand Name: Blue Star (Yellow)
• Material: Fabric Glue
• Color: White
• Name: Fabric Glue Blue Star (Yellow)
• Usage: Textile Fabric
• MOQ: 100 Box
• Shelf Life: 6 Months
• Chemical Resistance: Water
• Packing Size: 30 Ml Cone

• Type: Tile Adhesives
• Color: Creamy, White
• Application: Tiles Use
• Adhesive: Acrylic Based, Nature Rubber, Pressure Sensitive, Silicon
• Adhesive Side: Double Sided
• Feature: Antistatic, Heat Resistant, Holographic, Printed
• Brand Name: Sbr Bond

• Type: Fabric Glue, Industrial Automation
• Application: Fabric Stick, Art & Craft work
• Color: White
• Feature: Accurate Composition, Durable, Quick Dry, Waterproof
• Form: Gel
• Packaging Type: Plastic Paper Cone
• Packaging Size: 30 Gram
• Brand Name: legame
• Country of Origin: India
• Material: Milky white Paste type

We are offering polygrip s 709 adhesive. Polygrip s 709: polygrip s 709 is multipurpose synthetic rubber base adhesive, popularly known as contact adhesive. It possesses outstanding strength coupled with high peel value that makes it useful specially for automobile industries, shoe manufacturing, leather belting, luggage, furniture and mane other industries where material like metal sheet, bonded permanently with high strength to itself or to each other. Useful in ducting industry. Chemical composition : - a blend of synthetic polymers and synthetic resin dissolved in to a suitable combination of organic solvents. Applications : - polygrip s 709 is useful for variety of applications like: footwear: sole to leather bonding furniture: bonding of foam to rexin, metal and plastics in furniture floor carpeting: securing pvc jute rubber carpets to floor air conditioning: adhesion of insulation material lining automobile: upholstery fixing, seat making, etc luggage: adhesion of interior fabric lining typical data appearance -- tm-01pg brown density by hydrometer gml tm-03pg 0.82 0.84 packing 100ml, 200ml, 500ml, 1ltr, 2ltr, 5ltr, tins 30 ltr, 200 ltr drums. How to apply apply adhesive on both side the substrates by brush or appropriate machine.second coat may be required on porous substrates e.g. Leather, which can be given after 5-10 minutes of first coat. Allow a minimum of 20-30 minutes open time. The adhesive after drying exhibit tack. The finger test has proven itself to be a reliable method of judging open time, where as the time only serves as a rough indication, as various may occur depending upon room temperature, ventilation, relative humidity, type of substrates etc. In the finger test the adhesive must feel dry but still slightly tacky. The substrates bonded after prolonged open time and in absence of tack may results in inferior coalescence & bond strength.

• Country of Origin: India

araldite, bondtite, fevicol, wd-40, bondgrip, bulbound, anabond, hexon, vetra brands available

• Country of Origin: India
• Type: Glue
• Brand Name: Zipper
• Application: Home, Industrial, Shoes, Wood
• Color: White
• Feature: Accurate Composition, Durable, Impact Resistant, Quick Dry, Waterproof
• Form: Gel
• Packaging Type: Box
• Packaging Size: 20 ml x 25 Tubes/Box
• Surface Of Application: Plastic

• Country of Origin: India
• Brand Name: Astric Industries
• Type: Foam Adhesive
• Material: ASTABLISS
• Color: Grey
• Color: grey
• Product Name: ASTRIC™ ASTABLISS

A multipurpose, high polymer modified powder offering vast utility including applications for floor & wall in interior & exterior areas. It is a cementitious thin-set powder to be mixed only with water to install various types of medium format tiles & stone on a variety of substrates.   APPLICATION Designed specially for interiors floor & wall installations of all types of ceramic tiles, vitrified tiles, semi- vitrified tiles, glass mosaic tiles, precast terrazzo and natural stones over concrete and a variety of substrates. ADVANTAGES ⦁ For fixing tiles & natural stone on interior floor & wall. ⦁ Single component – Just add water ⦁ Water & Shock Resistant  ⦁ Polymer-modified Bonds with various substrates.  Coverage Details (per 20kg bag:) Packaging: 20 kg Colour: Grey & White Installation Guide for ASTRIC™ ASTABLISS To achieve a successful installation of very large format/thin tiles, follow these recommendations: ⦁ Proper surface preparation ⦁ Proper material mixing & application ⦁ Use of an edge-leveling system ⦁ Beating of the tile into the mortar bed using a rubber mallet Surface Preparation: ⦁ Ensure all surfaces are structurally sound, clean, and free of dirt, oil, grease, loose paint, laitance, concrete sealers, or curing compounds. ⦁ Proper surface preparation is crucial. Remove any demolding wax powder from the back surface of the tile. If a fiber mesh is present on the back surface, ensure it is completely removed before proceeding with the installation using ASTRIC™ ASTABLISS. ⦁ Dry, dusty concrete or masonry surfaces should be moistened, and any excess water should be removed. You can install on a damp surface. New concrete slabs need to be damp-cured and must be 28 days old before applying.  Material Preparation & Application: Mixing Procedure: ⦁ Place clean, potable water into a clean mixing bowl. Add ASTRIC™ ASTASUN Super Flex powder. Use approximately 5.5–6 L of water for 20 kg of powder. Mix with a low-speed paddle drill to achieve a smooth, paste-like consistency. Let the mixture stand for 5-10 minutes, then stir again before use. Stir occasionally without adding more water. Properly mixed, troweled ridges should stand without slump. Mixing Ratios: ⦁ Mix 5.5-6 L of clean water with a 20 kg bag of mortar.

• Material: Stainless steel
• Feature: Two Grids Oriented at 0 and 90 Degree Angles
• Theory: Resistance
• Usage: For Measuring Orthogonal Strains
• Operating temperature: -10 to 80°C
• Thermistor: 3KΩ at 25°C
• Gage Length: 0.3mm to 60mm

Load Cell is Heart of Electronic weighing scale, same way Strain gage is “Heart” of Load Cells. One of the most precise way to measure stress, can be done by means of Strain Gauge. They are easy to use and offer very precise and accurate results. Application of Strain Gauge is very wide, it is used in various fields for physical force measurements in mechanical, civil engineering, aircraft and marine as well as in medical science also.

• Application: Textile Industry
• Color: Transparent
• Feature: Durable, Impact Resistant
• Form: Liquid
• Packaging Type: Drum
• Packaging Size: 50Ltr

• Brand Name: HKE Constrobond
• Type: Tile Adhesives
• Country of Origin: India
• Packaging Type: HDPE Bag
• Model Number: T02 Gold
• Packaging Size: 20kg
• Strength: High

• Type: Other
• MOQ: 100pcs
• Packaging Details: 1 roll /bag
• Use: Industrial
• size: 0.5*2.5*1
• Machine Type: Sewing Machine
• Model Number: h01-0345

• Form: Liquid
• Feature: Accurate Composition, Quick Dry
• Application: Textile Industry
• Pack Type: Plastic Bottle
• Plastic Bottle: For Stitching Decorative Articles Like Mirrors, Beads, Threads, Etc. Onto Fabric.
• Shelf life: 12 Months

• Application: Furniture
• Raw Material: Silicone
• Features: Stong Bond
• Brand Name: Bond Tite
• Packaging Type: Pastic Box

We are main supplier of this product.

• Brand Name: Gopinathji Creation
• Application: Stone Bonding

We are well known manufacturer, exporter, wholesaler and supplier of Fabric Glue for Textile Industry. Prominent & Leading Manufacturer from Surat, we offer Fabric Glue Cone, Stretchable Fabric Glue, Adhesive Fabric Glue, Easy Fabric Glue, Industrial Fabric Glue and Fabric Glue. Our offered product is highly appreciated and demanded in the market. Our customers can avail the offered product at very affordable prices. Features: Excellent adhesive properties Enhanced pot life Right composition

• Packaging Size: 30 ml
• Brand Name: Astral Adhesives
• Application: Sticking Beads, Papers
• Pack Type: Bottle

We keep in consideration that the inputs (raw material) used are of incredible quality and meet the set industrial norms. Thus, the final products are as per the globally accepted quality standards. Since inception, we are serving divisive demands of the buyers by making available plentiful array of Zesta Fabric Glue in the domestic market.

In order to cater the variegated demands of our clients, we are offering an excellent quality range of fabric glue cone

• Feature: Moisture Resistant
• Form: Liquid
• Packaging Size: 1 Kg
• Packing Type: Can
• MOQ: As Per Customer
• Material: Glue

We are counted among the premier Manufacturers, Exporters, and Suppliers of Textile Printing Gum from Gujarat, India. We offer the Gum, imbued with high quality, after passing it through stringent quality testing stages. Besides, we ensure that it comes along with a longer shelf life and loaded with the desired combination of physical and chemical properties. We dole it out in a time-efficient manner and make it available throughout the globe.

We are offering fabric glue. Fabric glue, cone and bottle 30 gm pkg and bulk 50 kg carbo.(high bonding and fast drying than other fabric glue)

• Brand Name: Jau
• Type: Liquid Glue
• Model Number: 0001
• Usage: Fiber & Garment, Footwear & Leather
• Lead Time: 10 Business Days
• Packaging Details: Standard Box Packing as Clients Requirements
• Other Names: Glue
• CAS No.: Mixed
• Supply Ability: 1000000 Piece/Pieces per Month

• Type: Industrial Glue
• Application: Industrial Use, Wood
• Form: Liquid

• Material: Liquied Glue
• Color: Transparent
• Application: For DIY , Glass , Mobile etc.
• Type: Adhesive Glue
• Finishing: Shine
• Packaging Type: Tube
• Weight: 50 ML
• Packing Type: Needle Cap Tube

B7000 rhinestone adhesive is a highly flexible self-leveling adhesive for smart phones, rhinestone pieces, electronic components, jewelry, toys, metals, glass, rubber, fiber, paper, ceramics, wood, fabric, textiles, nylon, PVC, nail leather and other materials. It can also be glass glue. B7000 rhinestone glue needle design: open after use, will not clog. Allows small glue drops for fine, precise, controlled and mess-free application. Seals and isolates the flow of gases, liquids and air for superior bond strength over time when using plastics in underwater environments. B7000 Jewelry Glue has an initial cure time of 5 minutes and a full cure time of 24 hours. After application is complete, use a rubber band to gently align the reset device and pull it tight B7000 glue is air-cured at room temperature, safe and easy to use, with excellent waterproof, moisture-proof and shock-proof performance. It has excellent anti-aging and sealing properties. It is soft and elastic after curing. It has excellent bonding properties. Unbreakable Bonds: This industrial-grade adhesive provides a strong bond without causing damage to the surface. Trust B7000 metal glue for repairing or bonding items that require added strength and reliability.

• Brand Name: Jau
• Type: Liquid Glue
• Port: Surat
• Main Raw Material: Plastic
• Packaging Details: Standard Box Packing as Clients Requirements
• Supply Ability: 1000000 Piece/Pieces per Month
• Classification: Other Adhesives
• Place of Origin: Gujarat, India
• Other Names: Glue

• Brand Name: Sika
• Packaging Type: Bag
• Packaging Size: 20 Kg
• Form: Powder
• Shelf Life: 1 Year