Building Material Dealers in Amroli, Surat

• Brand Name: Astric Industries
• Country of Origin: India
• Material: A-STARK,A-STARK
• Color: Grey,grey
• Type: Foam Adhesive

A high-performance polymer-based adhesive to be mixed with water installing wall-small & floor-medium format ceramic tiles, vitrified tiles.   APPLICATION Designed for interior floor & wall areas.   ADVANTAGES ⦁ For fixing ceramic, vitrified tiles & natural stone on interior flooring ⦁ Ideal for tile-on-tile & new flooring  ⦁ High bond strength  ⦁ Single component -Just add water   Installation Guide for ASTRIC™ A-STARK   Surface Preparation:   ⦁ Ensure all surfaces are structurally sound, clean, and free of dirt, oil, grease, loose paint, laitance, concrete sealers, or curing compounds.   ⦁ Proper surface preparation is crucial. Remove any demolding wax powder from the back surface of the tile. If a fiber mesh is present on the back surface, ensure it is completely removed before proceeding with the installation using ASTRIC™ A-STARK.   ⦁ Dry, dusty concrete or masonry surfaces should be moistened, and any excess water should be removed. You can install it on a damp surface. New concrete slabs need to be damp-cured and must be 28 days old before applying.      Material Preparation & Application:   Mixing Procedure:   ⦁ Place clean, potable water into a clean mixing bowl. Add ASTRIC™ A-STARK Super Flex powder. Use approximately 5.5–6 L of water for 20 kg of powder. Mix with a low-speed paddle drill to achieve a smooth, paste-like consistency. Let the mixture stand for 5-10 minutes, then stir again before use. Stir occasionally without adding more water. Properly mixed, troweled ridges should stand without slump.     Mixing Ratios:   ⦁Mix 5.5-6 L of clean water with a 20 kg bag of mortar.

• Type: Natural Sand, River Sand, Sand
• Material: Sand, Silica
• Grade: 20/40, 30/60 80
• Color: Black, Brown, Dark-grey, Grey
• State: Crystal
• Packaging Type: HDPE Bags, LDPE Bags
• Hardness: 6-9mohs
• Packaging Size: 25kg, 50kg

  dear sir  my name is vipul desai and my company name kundli impex  from gujarat-india and we are manufacturing  silica sand last 20 years  we are seliing in india as well exporting to uae and middlie east  we are suppling  30/80 and 16/30 size. 1000 ton per month   also we can make 200 mas power as per requirement 

• Size: 190x190cm
• Type: Cover Blocks
• Material: Concrete
• Shape: Round
• Color: Grey
• Pattern: Plain
• Finishing: Non Polished

A cover block is basically a spacer that is used to lift the rebar matrix off the ground so that concrete may flow below the rebar. In order to prevent corrosion of the rebar, it has to be totally sheathed in concrete. It usually needs about 2 to 3 inches of coverage on all sides. So the cover block lifts the rebar up by about 2 to 3 inches and becomes a permanent and integral part of the poured concrete, make certain that no part of the rebar sags and minimizes that required concrete coverage throughout the pour.

25 ton min Requirement

Expansion Joint Filler Board, Wooden Doors, expansion joint sheets

MDF Jali, mdf art board, MDF Mobile Stand

Mortar, AAC Blocks, Cement, ready plaster, ggbs, Construction Chemicals

Teakwood, Plywood, Timber, Wood

calcite minerals, Plastic Additives, extenders

Silica Sand, Agro Products

modular ceiling rose, Electrical Angle Holder, l way junction box

Quick Lime Powder, Quick Lime, Hydrated Lime Powder

river sand

Aggregate Stones, White Basmati Rice, golden basmati chawal, Chana Besan

Silica Sand

river sand

RCC Drain Slabs, Bamboo Bench With flower pot, Outdoor Garden RCC Bench

Building Material, Grey Cement, White Cement, Paint, Pvc Pipe