Concrete Admixtures Dealers in Surat

• Brand Name: Astric Industries
• Country of Origin: India
• Material: A-STARK,A-STARK
• Color: Grey,grey
• Type: Foam Adhesive

A high-performance polymer-based adhesive to be mixed with water installing wall-small & floor-medium format ceramic tiles, vitrified tiles.   APPLICATION Designed for interior floor & wall areas.   ADVANTAGES ⦁ For fixing ceramic, vitrified tiles & natural stone on interior flooring ⦁ Ideal for tile-on-tile & new flooring  ⦁ High bond strength  ⦁ Single component -Just add water   Installation Guide for ASTRIC™ A-STARK   Surface Preparation:   ⦁ Ensure all surfaces are structurally sound, clean, and free of dirt, oil, grease, loose paint, laitance, concrete sealers, or curing compounds.   ⦁ Proper surface preparation is crucial. Remove any demolding wax powder from the back surface of the tile. If a fiber mesh is present on the back surface, ensure it is completely removed before proceeding with the installation using ASTRIC™ A-STARK.   ⦁ Dry, dusty concrete or masonry surfaces should be moistened, and any excess water should be removed. You can install it on a damp surface. New concrete slabs need to be damp-cured and must be 28 days old before applying.      Material Preparation & Application:   Mixing Procedure:   ⦁ Place clean, potable water into a clean mixing bowl. Add ASTRIC™ A-STARK Super Flex powder. Use approximately 5.5–6 L of water for 20 kg of powder. Mix with a low-speed paddle drill to achieve a smooth, paste-like consistency. Let the mixture stand for 5-10 minutes, then stir again before use. Stir occasionally without adding more water. Properly mixed, troweled ridges should stand without slump.     Mixing Ratios:   ⦁Mix 5.5-6 L of clean water with a 20 kg bag of mortar.

This highly advanced series of fuel additives have many desirable qualities such as catalytic effect for improved combustion, anti-fouling & anti-clinkering property for better heat exchange and dual effect, oxidation & reduction catalyst for lowering the emission levels.

Ms. Altret Industries Pvt. Ltd., Surat in technical collaboration with S.V.N.I.T., Surat, started to work in this area since 1992 and through extensive AR&D efforts launched ALTRET 95 & 2K Series of Combustion Monitoring ChemicalFuel Additives in the market. This highly advanced series of fuel additives have many desirable qualities such as CATALYTIC EFFECT for improved combustion, ANTI-FOULING & ANTI-CLINKERING property for better heat exchange and dual effect, oxidation & reduction catalyst for lowering the emission levels.

• Type: Tile Adhesives
• Color: Creamy, Green, Off Yellow, White, Yellow
• Application: Tiles Use
• Adhesive: Acrylic Based, Nature Rubber, Pressure Sensitive, Silicon
• Adhesive Side: Double Sided, Single Sided
• Feature: Antistatic, Heat Resistant, Holographic, Waterproof
• Design Printing: Offer Printing, Plain

Concrete Additives, Plasticizers, Paver Block

Concrete Additives, Gypsum Plaster, block jointing mortar, Ready Mix Plaster

Admixture for concrete, GGBS (Ground Granular Blast Slage)

Concrete Admixtures, anchor grouts, App Membrane, Construction Chemicals

superplasticizer, Laticrete Epoxy Grout, stone floorings

concrete admixture for building construction, specialty textile chemicals

Concrete Admixture