Corrosion Inhibitors Dealers in Surat

We offer crc 3-36 corrosion inhibitors. 1. General description multi-purpose lubricant and corrosion inhibitor. crc 3-36 is based on a paraffinic oil and a multiple organic inhibitor system that prevents rust and corrosion by displacing and sealing out moisture and by forming a continuous protection barrier against water and oxygen.the oily, almost invisible film of crc 3-36 lubricates and penetrates into the finest pores and cracks of the surface. Crc 3-36s effectiveness for surface protection is derived from three of its principal properties : affinity for metal low surface tension high capillary action. by its affinity for metal and low surface tension crc 3-36 displaces moisture and separates it from contact with the metal surface. The high capillary action contributes to the great spreading power. 2. Features multi-purpose lubricant, penetrant and corrosion inhibitor displaces and seals out moisture, especially after washing or hosing off engines or equipment penetrates through corrosion to loosen frozen parts lubricates without leaving a sticky residue cleans light soils and contaminants prevents 'fingerprinting' by its protective film protection of all metals and alloys compatible with most painted surfaces, coatings, plastics and rubbers equipped with the 360 (upside-down) spray valve for added convenience pressurised with non-flammable co2 propellant active product content of 97% specifications : nsn 6850-00-050-0659 usda class h2

Corrosion inhibitor. A corrosion inhibitor is a chemical compound that, when added to a liquid or gas, decreases the corrosion rate of a material, typically a metal or an alloy. The effectiveness of a corrosion inhibitor depends on fluid composition, quantity of water, and flow regime.

Corrosion inhibitor exclusively for pipe lines for hydro testing where water used as a fluid. Nitrite based liquid used as a corrosion inhibitor in closed circulating coolingchilling water system. High performance corrosion inhibitor in closed re-circulating chilledwater system. It is a combination anodic nitrite base corrosion inhibitor along with azole to take care of multi metal base chillingclosed re-circulating cooling water system.

Powerful acid inhibitor for Cu metal. Powerful acid inhibitor for hydrochloric acid. Advance formulated copper metallurgy corrosion inhibitor (Concentrated). Corrosion inhibitor exclusively for pipe lines for hydro testing where water used as a fluid. Nitrite based liquid used as a corrosion inhibitor in closed circulating coolingchilling water system. High performance corrosion inhibitor in closed re-circulating chilledwater system. It is a combination anodic nitrite base corrosion inhibitor along with azole to take care of multi metal base chillingclosed re-circulating cooling water system.

Metals are widely used in the construction of equipment associated with aqueous systems in which metals remain in contact with aqueous fluids on a regular basis, for example, hydro-testing of metallic equipments, fire extinguishing systems containing water, cooling or heating systems, heat exchangers and many more. The aqueous system generally contains vessels, piping, valves, etc. When water comes in contact with these systems, corrosion of the metal, during and after contact, is a concern. Corrosion Inhibitor SAC-CI 100 when added to water in small concentrations is able to prevent corrosion during wet storage. The corrosion inhibitor prevents corrosion even after vacating water from the system. Our Corrosion Inhibitor SAC-CI 100 is a combination of corrosion inhibitors, alkalinity builders, passivator, surface modifiers, chelating agents, oxygen scavenger and capable to protect various metals from corrosion even in the presence of relatively high concentrations of Chloride and Sulfate ions. The Corrosion Inhibitor SAC-CI 100 is suitable to reach every corner of the part / system that requires protection from severe corrosive atmosphere. Mechanism : The mechanism of Corrosion Inhibitor SAC-CI 100 is to prevent corrosion of metals in three phases: within the solution, at the water line, and above the water line. Our Corrosion Inhibitor SAC-CI 100 also prevents corrosion in the areas which are not reachable with other corrosion inhibitors. Features And Benefits Of Using SAC-CI 100 : No heavy metalsProvides up to 24 months of continuous protectionProvides mono-molecular inhibiting layer (protection layer) Additional Benefits : The product provides vapor-phase inhibiting action which protects inaccessible and recessed surfacesNo regeneration required; effective for up to 24 monthsIf the protective layer is disturbed by moisture or opening of the enclosed space, the layer is replenished by continuous vapour protectionLittle or no surface preparation required and easy to applyPrevents further corrosion of the pre-coated and painted surfacesThe protection layer does not need to be removed prior to processing or useThe protection layer does not interfere with operation of mechanical components Application And Additional Applications : Typical aqueous systems include, but are not limited to : Open re-circulating cooling systems, closed loop cooling systems, boilers and similar steam generating systems, fire fighting systems where water remains in constant contact with water, heat exchange equipment, reverse osmosis equipment, oil production systems, flash evaporators, desalinization plants, gas scrubbers, blast furnaces, paper and pulp processing equipment, steam power plants, geothermal systems, food and beverage processing equipment, sugar evaporators, mining circuits, bottle washing equipment, soil irrigation systems, closed circuit heating systems for residential and commercial use, aqueous-based refrigeration systems, down-well systems, aqueous machining fluids (e.g. for use in boring, milling, reaming, broaching, drawing, turning, cutting, sewing, grinding and in thread-cutting operations, or in non-cutting shaping, spinning, drawing, or rolling operations), aqueous scouring systems, aqueous glycol anti-freeze systems, water/glycol hydraulic fluids, ferrous-surface pre-treatment, polymer coating systems, and the like. Various types of water may be utilized in such systems, for example fresh water, brackish water, sea water, brines, sewage effluents, industrial waste waters. Additionally The Product Is Very Suitable For The Following : Hydro-testingLong term storage of waterTubular structures, pipes and vesselsInternal surfaces of compressors, turbines, engines, tanks, boilers, heat exchangersClosed circuit cooling systemsEquipment protection after hydrostatic testing Metals Protected : Carbon steelMild steelStainless steelCopperBrassAluminium Direction For Use : The product dose depends on quality of water and corrosive tendency of atmosphere also in some cases. But in general 10 to CI 1000 PPM is sufficient. More particularly, the dose may be 300-500 PPM. The product may be dosed by a slug feed or by blending with the aqueous fluid as the system is being filled. One can dose the material continuously using metering pump also. The pH of the aqueous system in which the product may be applied ranges from about 5 to about 12. The pH is preferably in the range from about 6 to about 10. The dosage can be increased for more severe conditions. Storage : Store in a sealed container in a dry warehouse, avoiding direct exposure to sunlight, with temperatures not exceeding 150oF (66oC). Under these conditions, shelf life is up to 24 months. Packing : The product is available in 50 to 200kg HDPE carboys. Safety precautions : Before handling the product, refer material safety data sheet which contains detailed information about this product (available on request).

Corrosion Inhibitor, Water Treatment Chemicals, ANTISCALANT, microbiocide