Creative Polyfilms Ltd Varachha, Surat, Gujarat

For Weaving, Flat and Circular Knitting Any Polyester single Metallized monofilament supported with two ends of 20d or 40d polyamide nylon monofilament. This item is applicable to yarn-dyed weaving and knitting. Also recommended for Nylon stocking, fine gauge, panty hose and bating suit fabrics. The put up is on cones of 250 gms.net (Baby cones), 500 gms. net as per your request. The quality is super soft.

Any metallic colored yarn 12 microns can be rounded on Rayon or any other thread denier as per requirement. These yarns are used extensively in many branches of the textile industry from wide width weaving the narrow ribbons, military regalia, embroidery, braids, knitting, cords, ropes, twisting, leavers, lace surface and inner gimp decoration. Wrapping a metallic yarn around a core yarn produces them. The metallic here fully covers a polyamide/nylon or polyester core yarn. These yarns or embroidery threads are specially made for use on modern milyi-head embroidery machines, where speed is an important factor. A special yarn lubricant is applied to these yarns. Supplied on cones of 125 gms. And 250 gms.

Our range of metalized plastic films includes metalized polyester films, metalized CPP films, metalized OPP films, metalized Paper films, metalized BOPP films. With in-house production unit equipped with state-of-the-art machines, we have the capacity to produce metalizing plastic films in various specifications of microns and optical density. In addition to this, our metalized films provide an excellent barrier against light, moisture, gases, etc. Products Types Our metalized plastic films are given as follows: Metalized Polyester Film Metalized polyester film is best suited for flexible lamination and holograms. However, the wide known application includes twist wraps for candies. Metallic polyester film is produced through micro slitting process to ensure consistent weight and uniform coating

Available with us is a wide range of metallic yarns which is also termed as "BADLA" in INDIA. These are in demand due to distinct shades and colors and possess following specifications: Colors Silver Gold Red Green Rainbow and Many others Thickness 12 microns 23 microns 30 microns Sizes 1/35" 1/69" 1/85" 1/100" and many more. Properties Good tensile strength Variety of colors Smooth & uniform Available in vast range of sizes Uses Weaving Laces Knitting Embroidery For Decorative Home Furnishing Products

Metalized polyester film is best suited for flexible lamination and holograms. However, the wide known application includes twist wraps for candies. Metallic polyester film is produced through micro slitting process to ensure consistent weight and uniform coating

We give special treatment while coating polyester film to produce best quality polyester film. Following types of lacquered/coated films are available with us: One side Lacquered Metalized Polyester Film Both Side Lacquered Metalized Polyester Film (D.G. Grade) Lacquered Metalized Polyester Film (Extra Slippage)  

TWISTED YARN For Flat and Circular knitting This yarn quality is usually made on 12 micron 1/110” twisted with 75d Rayon. It can also be twisted with polyester, Nylon etc. on your request. By using this item, more splendid design and tender touch can be obtained in appearance of woven & knitted fabrics. Not recommended for dyeing. Suitable for making of braids, trimmings, fancy up spinning and for embroidery on Saurer and Schiffli machines & for metallic & for metallic gimp application. Supplied on cones of 250 gms., 500 gms. Or more.For colours in MH/MHR type, Please send a small cutting. Available with raw or colored Nylon/Polyamide, Rayon, Polyamide, Polyester, etc. on request. JABBARA TYPE: METALLIC SPACED GIMPS OR COVERED YARN These are gimped yarns where the metallic does not fully cover the viscose/rayon or polyamide/nylon core yarn, which is visible in between the metallic wrapping thread.

Foil stamping uses heat and hot stamping foil in a specialty printing process that produces a shiny design on paper, vinyl, textiles, wood, hard plastic, leather, and other materials. Foil stamping, also called hot stamping, dry stamping, foil imprinting, or leaf stamping, can be combined with dimensional embossing to make letters and images on business cards, book covers, gift cards, office folders, and a whole host of professional or personal items. Instead of using magnetism, plates, or inks to print words and shapes, foil stamping uses dies, or sculpted metal stamps. The heated dies seal a thin later of metallic leaf onto a surface. The foil comes in a wide roll, large enough for several passes, backed by Mylar. The hot die works similarly to a letterpress. Once heated, it presses the foil against the substrate material with enough pressure that the foil sticks only in the intended places, leaving a slight imprint. Foil leaf is available in every imaginable color and pattern, like standard gold or marbleized green. Rarer types of leaf come in matte, pearlescent, holographic, opalescent, or glossy finish. Semi-transparent layers allow an under color to show through. Not only does it provide a uniquely vibrant image with depth, foil stamping can be applied to a much more diverse selection of substrates in comparison to ink.    

Polyester hot-melt adhesive films are designed to show excellent adhesion to variety of fabrics. They show high bond strength, have good heat resistance and exhibit excellent chemical resistance. Polyester adhesive films have a stiff hand and are typically not suited for application where elasticity is required. Product Introduction Hot melt adhesive film, known as hot melt glue, hot melt back adhesive, is composed of hot melt adhesive film layer. At normal temperature,it is similar to ordinary film, after heating, producing stickiness. Its heating and pressing process is simple, and has high peel strength, wash&dry cleaning resistance, it’s environmentally friendly and non-toxic. Product Features Rapid adhesion, wide bonding range, easy to operate. Uniform weight distribution on film surface, fully adhesive. Single layer or multilayer lamination. With good elasticity, tensile force, folding strength, and wash resistance.    

Polyester hot-melt adhesive films are designed to show excellent adhesion to variety of fabrics. They show high bond strength, have good heat resistance and exhibit excellent chemical resistance. Polyester adhesive films have a stiff hand and are typically not suited for application where elasticity is required.Rapid adhesion, wide bonding range, easy to operate. Uniform weight distribution on film surface, fully adhesive. Single layer or multilayer lamination. With good elasticity, tensile force, folding strength, and wash resistance

Foil stamping uses heat and hot stamping foil in a specialty printing process that produces a shiny design on paper, vinyl, textiles, wood, hard plastic, leather, and other materials.Foil stamping, also called hot stamping, dry stamping, foil imprinting, or leaf stamping, can be combined with dimensional embossing to make letters and images on business cards, book covers, gift cards, office folders, and a whole host of professional or personal items.Instead of using magnetism, plates, or inks to print words and shapes, foil stamping uses dies, or sculpted metal stamps. The heated dies seal a thin later of metallic leaf onto a surface. The foil comes in a wide roll, large enough for several passes, backed by Mylar. The hot die works similarly to a letterpress. Once heated, it presses the foil against the substrate material with enough pressure that the foil sticks only in the intended places, leaving a slight imprint.

We offer a wide range of polyester holographic film. Our production unit is installed with advanced embossing machines, which help us in the mass production of high quality holographic films. Moreover, we have our own facilities to provide coating, embossing and metallizing of holographic films. Product Feature Our holographic films are very thin and flexible plastic films that have been micro-embossed with holographic images or patterns. These images or patterns provide a 3-D effect and spectral colouring. During the embossing process, several tiny grooves are placed into the surface of the film at different angles and in different shapes, which ultimately cause the diffraction of regular white light into spectral colouring.     Application Our holographic film are used for flexible packaging and labeling of a wide range of industrial and consumer products. These films are also used for promotional brochures and security stickers. The product-wise application of our range is enlisted below Specification We provide holographic films in all the important holographic formats including 2D, 3D, dot matrix etc. The available thicknesses of different films are as follows: PRODUCTSTHICKNESS Polyester Film 12,23,50 Microns

For Weaving, Making Fancy Yarns, Ribbons and Woven Labels This item is made of 12 or 24 micron, one-sided Metallized polyester film that is Metallized with aluminum & colour coated with resin by high technique. Other thickness of the polyester film such as 36 & 37 micron can be supplied on request with the minimum quantity to be specified.   Make-Up 100 gram on bobbin (Bobbin size Dia.54mm X Height 63mm)160 gram on bobbin (Bobbin size Dia.70mm X Height 64mm)300 gram on bobbin (Bobbin size Dia.83mm X Height 98mm)