Epoxy Coatings Dealers in Surat

Clients can avail from us Ultimate Waterproof Coating which is a thermal insulating, an elastomeric, resilient and waterproof coating. ULTIMATE is a single component, water based high solids, elastomeric acrylic resin based coating. Ultimate Waterproof Coating is an advanced acrylic technology product manufactured by combination of pigments, reinforcing fillers and an Australian thermal non-conductive material. On application, Ultimate Waterproof Coatings form a waterproof elastomeric seal in the form of monolithic uniform membrane, which provides protection from ageing, ultraviolet rays and normal weathering. It reflects heat as well as it does not allow the heat flux transmission. Ultimate Waterproof Coating reduces building maintenance cost as well as saves air conditioning energy up to 25 %. Its performance is more effective than that of the conventional waterproofing and protective products available in the market. Benefits Single component, easily applicable by brush, roller or spray.Adheres strongly to a wide variety of sound substrates such as concrete, metal, modified bitumen wood, polyurethane foam etc.Water vapor transmission decreases maintenance cost.Water seal increases longevity.Ultraviolet light protection maintains aesthetic appearance.Heat - non - conductive property saves air conditioning energy cost up to 25%.Unique non-conductivity (to heat) properly keeps the building warm in cold season and cool in hot season.Prevents growth of moss, fungus and algae. Repels airborne pollutants and dirt that makes the substrate look new for years after application. Lightweight-puts less stress on the building.Nontoxic-safe for the environment and the people, applying it. High reflective-light reflection value of 92 at 700nm.Attractive color shades available, if required. Grades Ultimate HL : zontal surface. Has extra elastomeric resilient property to meet the coefficients of expansion and contraction, wear tear erosion & abrasion resistant.Ultimate VL : ertical surface. Has elastomeric membrane property to meet the movement. End Uses Building roof, terraces and exterior walls, industrial - factory roofing - concrete, asbestos, tin etc. Cold storages, Electronic exchange building roofs, hospital buildings, etc. Direction For Use Surface Cleaning Surface preparation is very important to get the best result and to avoid failure. The substrate must be sound enough, clean and free of dirt, grease, oil, sludge, moss, blistered cement coating, loose plaster etc. Thoroughly wire brush the surface to remove saturated dirt and lose particles. Wash the surface to remove dust. Allow the surface to dry completely. Sealer / Primer Coat The concrete or cementitious substrates are highly porous. It is necessary to make the substrate less Absorptive so that the top coats film thickness remains same. Krishna SEALER is highly elastomeric acrylic emulsion polymer without filled system has extra ordinary penetrating power which seals the porosity. Micro crevices of the substrate. It provides strong adhesion to the substrate and top coating. Due to non-filled system it overcomes the problem of linear stress and strain created in the substrate. Apply one coat of SEALER as a primer coat by brush. Apply the top coat after one hour but within four hours of drying of SEALER coat. Application Seal the cracks of parapet wall and roof substrate by creating a groove of 3mm size, with acrylic sealant. Allow the sealant to dry for 24 hours before applying a sealer / primer. Mixing Mix the content of pack in its original container by stirring with the help of a wooden stick to a uniform, homogenous free flowing paste consistency. Apply the first coat of Ultimate by brush or roller generously. Allow the coating to dry for attest 3 hours before applying second coat. Minimum two coats are recommended. If required, additional coat may be applied. Allow the coating to dry / cure on its own, external curing is not required. Cleaning : Tools and equipment to be cleaned with water immediately after the use. Storage & Shelf Life : Store the material in cool dry place. Shelf life of the unopened container is one year from the date of manufacture. Packing : 1, 4, 20 Liter packs Precaution Do not apply on wet or damp substrate.Do not apply in rain.Do not dilute more than 20% with water.

We offer crc sp 400 anti rust coating 1. General description of crc sp 400 anti rust coating long-term outdoor and indoor corrosion inhibitor. crc sp 400 is a long-term, outdoor and indoor corrosion inhibitor for machined surfaces and assemblies subjected to long periods of storage or adverse shipping conditions.the amber, dry, waxy film never becomes brittle and is highly resistant to humidity and severe corrosive atmospheres. 2. Features of crc sp 400 anti rust coating long-term protection (up to 1 year outdoors) for all metals during shipment or extended storage waxy film seals out moisture effectively highly resistant to humidity and salt spray can be removed or diluted, for film thickness variation, with petroleum solvents aerosols use hydrocarbon propellant for controlled application and film thickness specifications : meets mil-c-16173, grade 4 nsn 8030-17-039-7214 usda,class p1 3. Applications crc sp 400 anti rust coating protection of finished components, in-process parts, in-transit goods, raw materials, structural steel. effective corrosion shield for overseas shipments, winterising of farm machinery, outdoor storage. protection of equipment, tools, dies, molds, jigs, pipes, shafts, housings, wire ropes, valves, gears. to be used for brine and chloride resistance in refrigeration plants. in paper and pulp plants. as a cable end sealer and pipe joint protector in utilities . protection of air conditioning and electrical equipment in hospitals and educational institutions. in airport and aircraft maintenance and construction.

We have hired only experienced personnel for carrying out the service in a professional manner.

ndustrial Epoxy Flooring selction largly depends on substrate condition, application/usage of floor and intended purpose as specified by the customer.Many times Industrial facilities are subject to heavy wear and tear on a daily basis. Forklift and pallet trucks are continuously shifting and dragging heavy loads across the floor. Any industrial epoxy flooring specified for such facilities need to be properly designed so that they can withstand the heavy mechanical stress. We proved our core-competence in Epoxy flooring application on most challenging floors by offering customized solution to meet client specific requirements all over country using basic Epoxy resin from renowned sources. Repeat orders from many endorse our claim.  The range of Industrial Epoxy Flooring that we offer is great for industry use. It is resistance to abrasion and impact. We offer the range at competitive prices. This range of epoxy flooring levels out worn and bumpy floors, and helps to make work environment conducive to productivity.   Specifications: Thickness ranging from 1 mm to 12 mm or more With / without screed Available in various colours Impact & Wear resistance  Beautiful Glossy Finish Oil, Grease & Chemical resistance Easy to clean & maintain Dust free and conducive work environment Scratch proof  Smooth traffic Flow and systematic layout Antibacterial Floor  

Water Dilutable Expoxy Coating(Hydracrete -ACR) HYDRACRETE -ACR:Is a acrylic emulsion polymer based additive/modifier for cement (portland) based waterproofing and structural protective coating composition. It modifies / enhances the properties of cement such as bonding, impact, flexural and cohesive strength. Similarly it improves the toughness, abrasion, wear and water resistance of cement in plaster and concrete. Eventhough it makes the concrete/plaster waterproof. It retains the water vapour diffusion of the substrate. All these functions make HYDRACRETE - ACR unique and versatile cement compatible polymer so that it can be safely used for structural repairs and rehabilitation jobs. Benefits Easy to use. Cement compatible in all proportions. Bonds strongly to almost all building materials. Resists hydrostatic water pressure and remains unaffected in continuous contact with water. Weather durable - resist UV rays, dilute alkaline and acidic solutions and prevents substrate from erosion and corrosion. Non toxic, nonhazardous-when exposed to fire does not generate toxic fumes. Alllows trapped water vapour to excape and prevents blistering and peeling off problems.

Epoxy Floor Coatings consist of 100% solid epoxy hardener and chemically treated fillers. WE make available Epoxy Floor Coatings in fast moving colors and also in custom build colors. Thus, buyers can choose any of them as per their requirement. These coatings are perfect for residential and commercial installations.  When it comes to delivery, we always deliver Epoxy Floor Coatings on time that makes us stand tall among our competitors.

Web Width -> 1000 mm Coating Thickness -> 15-25 GSM Substrate to Coat -> Paper & Laminated paper Speed -> 80-120 meters/min

We provide any speciality finishing for any purpose in textile. We have well equipped laboratory and testing facilities to support our sophisticated technological innovations. We offer Coating Facility from 5 GSM to 1000 GSM. We can do single as well as double side coating. We can process up to width of 96�� on our machines. In case of bulk order, we can provide fabric along with coating. We are involved in finishing and coating process on all types of fabrics of different fibers like Cotton, Polyester, Denim, Nylon and blends for different fabrics like Upholstery, Curtains, Canvas, Poplin, denim, velourd, non-woven etc.

• Drying Time: 3-5 hours
• Feature: Chemical Resistant
• Type: Powder
• Application: Household appliances, Bicycle and Automobile
• Form of Paint: Powder
• Pack Type: Box

• Width: 10 mm to 2100 mm

Polyester film is a high-performance film made from polyethylene terephthalate (PET) resin. The Polyethylene Terephthalate (PET) resin is made from Ethylene Glycol and dimethyl terephthalate (DMT). The PET resin used is of a similar intrinsic viscosity (IV) to fiber grade resin, used to produce polyester fibers, but has a higher purity. PET resin is made in special grades for specific film types and often contains slip modifiers. In comparison with other common plastic films, polyester film is characterized by high tensile strength, excellent dimensional stability, low moisture absorption, good retention of physical properties over a fairly wide temperature range (-70° to 150°C), excellent electrical properties, and good optical clarity. Because of its higher price relative to PVC, polyethylene, and polypropylene film, polyester film is generally considered a specialty film among all plastic films; however, markets of considerable volume have developed that require this strong, dimensionally stable film. Prices are higher than most commercial plastic films primarily because the manufacturing process is much more costly due to the need for an orientation step. (Most polypropylene film is also oriented.Tear resistance, Easy to use Long life.

• Supply Ability: 100000 Metric Ton/Metric Tons per Month
• Model Number: SBRLatexWaterProffing
• Lead Time: Shipped in 10 days after payment
• Place of Origin: Gujarat, India
• Brand Name: Lion
• Application: Water Proffing
• Type: Other Waterproofing Materials

We are the main supplier of this product.

• Packaging Size: 4 kg
• Color: White
• Country of Origin: Made in India
• Brand: Pricision MRO

If you want a long-lasting investment for your car, this is something to consider. Paint coatings resist dirt and dust better than traditional protection, so your vehicle will stay cleaner for longer periods of time. Your paint will be extremely easy to wash because dirt wipes away easily – no scrubbing is required if you properly maintain your vehicle. We have available all types of Teflon coating , ceramic coating, glass coating n paint protection treatment for all color cars for all automobile car brands

• Packaging Type: Box
• Color: Transparent
• Usage/Application: Car Ceramic Coating

• Country of Origin: India
• Type: sublimation tiles
• Brand Name: Surat polymers
• Material: Ceramic
• Finishing: Glossy finish
• Chemical Resistance: Yes

We are the manufacturer and service providers of this product We provide frp lining, epoxy Coting, hdpe pipelining. We are providing our best services from last 20 years