God's Steelcon Pvt. Ltd. Ghod Dod Road, Surat, Gujarat

Color : Silver

Driven Type : Non Power Driven

Material : SS

Surface Treatment : Galvanised

Thickness : 0-1 mm, 1-2 mm, 2-3 mm

Color : MULTI-COLOUR

Country of Origin : Made in India

Roof Insulated Panels is one of the premier roofing systems which uses the Roof profile for a durable, low maintenance and weather-tight roofing system. The large panel size reduces the number of joints, and the high corrugation overlap joint reduced water leakage.

Purlins and girts are roll formed Z sections, 200 mm deep with 64 mm flanges shall have a 16 mm stiffening lip formed at 45˚ to the flange. They are supported on columns, rafters or building walls. They can be lapped and nested at the supports which creates a continuous beam configuration. They are placed on the roof and perimeter of the building. Hence they serve as a support to the roof sheeting and wall cladding.

Feature : Very high light transmission of up to 90%, Available in tailored lengths, hence minimum wastage, Excellent thermal and electrical insulation properties.

Color : Green, Blue, Red, Orange

These are long span load carrying trusses suitable for direct support of floors and roof decks in the buildings. The system consists of crimped angles welded to the top and bottom chords.

Material : Steel

Surface Treatment : Color Coated

Color : Grey

Country of Origin : Made in India

Thickness : 2-10mm

Color : All

Size : Any

Brand Name : SUNTUF

Country of Origin : Made in India

Color : All color

Surface Treatment : Galvanised

Thickness : 0.20-0.80 MM

Type : GC sheet

Eave struts are 200 mm deep with a 104 mm wide top flange, a 118 mm wide bottom flange, both are formed parallel to the roof slope. Each flange has a 24 mm stiffener lip. These are located along the sidewall; at the intersection of the planes of the roof and wall. It is constructed from cold formed C-Section and is rolled to suit the roof slope. This member transmits longitudinal wind force on the end walls from roof brace rods to wall brace rods.

Cable bracing is made of extra high strength seven strand cable and can be designed to accommodate any length to ensure the stability of the building against forces in the longitudinal and lateral direction due to wind, cranes and earthquakes. It is made of a cable which is forged into a rod terminal and this arrangement is then fixed on a structure using a hill side washer, nut washer and a nut.