Lubricants Dealers in Pandesara, Surat

We offer molykote hsc plus solid lubricant paste solid lubricant paste; contains no lead or nickel temperature -30 degrees centigrade to + 1100 degrees centigrade molykote hsc plus applications: for metalmetal combinations that are subjected to high temperatures and frictional contacts which, typically for bolted joints, are free from lead or nickel. Suitable for lubrication points with low speeds, subjected to high temperatures and corrosive effects, and also require a low and constant coefficient of friction. As a contact lubricant for electrically conducting components. Used successfully for stud bolts of gas and steam turbines, stud bolts of turbochargers of diesel engines, flanged connections in chemical and petrochemical plants. molykote hsc plus features: molykote hsc plus can be used over a wide range of temperature -30 degrees centigrade to + 1100 degrees centigrade molykote hsc plus enables non destructive dismantling even after long use at high temperatures. high load-carrying capacity due to stated coefficient of friction defined pre-stressing forces for bolted joints can be achieved. good corrosion protection good electrical conductivity. molykote hsc plus composition: solid lubricants thicking agents powdered metal ( lead free ) mineral oil color : copper penetration density : iso 2137 unworked penetration & iso 2811 density at 20°c (68t) molykote hsc plus temperature resistance : service temperature : -30 to 1100 degrees centrigrade molykote antisieze compound, molykote 1000, molykote p - 37, molykote hsc plus, molykote br2 plus, molykote g-n metal assembly paste

• Packaging Size: 400 ml
• Application: Industrial
• Grade: Technical Grade
• Appearance: Colorless Liquid, Sweet Odor
• Surface Tension: 23 mN/m at 25 Deg C est
• Viscosity: 0.76 mPa.s at 20 Deg C, calc.
• Specific Gravity: 0.808 at 20 Deg C
• Boiling Range: 100-170 Deg C
• Vapor Density: 4 (vs air = 1)
• Freezing Point: Less Than -30 Deg C
• Evaporation Rate: 19 (vs ether = 1)
• Flash Point: 25 Deg C (closed cup)
• Hildebrand Solubility Parameter: 8.206 calc
• Hydrogen Bonding Index: 0.384 calc.
• Fractional Polarity: 0.037 calc.
• Plastics Compatibility: Poor, Test Prior to Use
• Minimum Order Quantity: 1 Piece

• Country of Origin: India

420 ML =320 64 ML = 110

• Packaging Type: Plastic Bottle
• Color: Pale Yellow
• Packaging Size: 1 Liter
• Is It Water Resistant: Yes
• Features: Base Oil

In thousands of factories and plants, 3M maintenance and cleaning aerosols are used every day to save time and effort. Lubricating, cleaning, inhibiting rust, and other tough jobs become easy with the convenience and effectiveness of our formulated chemicals. Cleaners can also be used to prep surfaces and help improve adhesive bonding by removing dirt, grease and other contaminants, leaving a clean substrate.

Antistatic Agent For Yarns, Embroidery Machine Oils, Meta Quenching Oil

Lubricant, Wire Drawing Oil, Grease, Diesel, Heavy Alkylate Benzene

Grease, Compressor Oil, Slideway Oil, Circulating Oil, Gear Oil

V Belts, Industrial Items, red ochre clay, Red Ocher Powder

Abrasives, Indexable Cutting Tools, Solid Carbide End Mills

Lubricating Oils, Greases, Engine Oils, Gear Oils, Automotive Oil

Lubricant, Engine oil, Gear Oil, Grease

apar make poweroil industrial lubricants, hguru brand instruments

Lubricant

Greases

Warp Yarn Lubricant

Chain Lubricant