Metallized Film Capacitor Dealers

• Country of Origin: Made in India
• Voltage: 250 to 1000 V DC
• Capacitance Values: 0.01uF to 1uF
• Capacitance: 104 F
• Tolerance: 5% to 10%

• Driven Type: Electric
• Power: 0-5Kw

• Voltage: 100 - 1000 V
• Operating Temperature: -40 - 105 Degree C
• Capacitance: 0.001 - 10.0uF

• FEATURES: Indicate flat oval and axial lead electronics components Self-healing property , High stability and reliability.

THE Type-MEA are constructed with metalized polyester film dielectric, copper-ply wire leads , outer wrapped with polyester film tape and ends sealed with epoxy resin , in non-inductive type.

• Usage: General Purpose
• Brand Name: TC Components
• Type: Polyester Film Capacitor
• Rated Voltage:: 250v,400v,630v
• Capacitance: 102 to 335, 0.uf001uf to 3.3uf

Features Very low loss at high frequency, suitable for high current High insulation resistance, long life due to self-healing effect Widely used in high frequency,DC,AC and pulse circuits  

We bring forth the highly functional Metallized Polypropylene Film Capacitor for our reputed clients. This Metallized Polypropylene Film Capacitor has high dielectric strength and greater conductivity. We provide this Metallized Polypropylene Film Capacitor at reasonable prices.

The cylindrical capacitors of our universal ACDC series "E62" are perfect for non-sinusoidal voltages and pulsed currents, e.g. as damping or commutation capacitors switched in parallel to a thyristor, or connected in series with a resistor (damping of undesirable voltage spikes during the switching of power semiconductors). They can be widely used as supporting, smoothing, and surge discharge capacitors, further in AC filters, a.m.o. The low loss factor of our MKP dielectric compensates to a large extent for the losses caused by the non-sinusoidal voltages.

• Brand Name: CTR
• Voltage: 1.5 rated DC voltage for 10 sec
• Operating Temperature: -40 DegreeC + 85 DegreeC
• Country of Origin: Made in India
• Part Number: MPPRC/I7
• Dielectric: Polypropylene film
• Tolerance: +-5%, +-10%

• Operating Temperature: - 40 degree C to + 85 degree C
• Voltage: AC 250V
• Tolerance: -+5% -+20 %
• Voltage Rating: 0.01uf to 4.7 uf

• Weight: 0.67g ±5%
• Color: Brown
• Description: 0.001uF (1nF) 630V ±5% - ±10% Non-Polar Metallized Polypropylene Film Capacitor

A Press shop tool room plating unit is located at Gokul road and a fully integrated capacitor manufacturing unit located at Tarihal estate. The current capacity is 20 million with a total installed capacity 40 million comprising of state of the art machinery imported from USA and JAPAN. The entire manufacturing process done under climate controlled conditions. Our film capacitors use oil impregnation technology which is a homegrown technology and perfected for mass manufacture. Our film capacitors have a lot of advantages over metallized capacitors which have been listed below. 1) Higher dvdt rating, higher peak current capacity, higher insulation resistance over metallized capacitors. 2) Oil impregnation of film capacitors acts as a coolant at higher temperatures and prevents breakdown. 3) Mode of failure in film capacitors is in short circuit mode versus open circuit mode for metallized capacitors

We are offering metallised polyester capacitors - axialradial box dip type - 0.001µf to 20µf, 63v to 1000vdc higher voltage and capacitance on request metallised polycarbonate capacitors - axialradial type - 0.01µf to 10µf 63v to 630vdc metallised polyphenylene sulphide capacitors - axialradial - 0.047µf to 10µf, 63v to 400vdc metallised polypropylene capacitors - axialradial dip type - 0.001µf to 20µf 63v to 2000vdc can metal box type - 1µf to 100µf 63v to 250vac 1µf to 60µf 440vac & 1µf to 25µf 600vac higher voltage and capacitance on request interference supression capacitors- axialradial type - x2 type 0.1µf to 1µf 250vac & 440vac dc link capacitors - 50µf, 60µf, 66µf & 140µf, 800v and 1000vdc igbt snubber capacitors - 0.22µf to 1µf, 1000v to 2000vdc, 480v to 750vac broad brand emi noise filters (feed through pi section) - upto 200a rfi noise filters upto 200a.

We are a prominent trader, wholesaler and retailer of Metallised Polypropylene Capacitors (AXIAL). For the fabrication of this range, our vendors use the finest quality raw material and state-of-the-art technology in compliance with international standards. Our offered product is suitable for energy-saving lamps, ballasts, UPS and other applications. Acclaimed for its proper functioning, high durability, robust construction, high efficiency, and longer service life, this is highly demanded in the market.   Specifications:   Custom Designed Capacitors for +85ºC and +105ºC Available on Request   HED: High Energy Discharge:   Voltage Range: 35 VDC – 450 VDC Size: 63 Ø x 105 mm / 90 Ø x 220 mm Temperature Range: -40ºC / +85ºC.   Application:   Capacitor Discharge Welding, Magnetizers and Other Pulse Discharge Applications. Round Configuration wrapped in Polyester adhesive tape and sealed epoxy resin, used extensively in Telecommunications.  Capacitance Range: 0.001 to 10mfd Voltage Range: 63vdc to 1000vdc Temperature Range: -55 deg to +125 deg. Additional Information: Minimum Order Quantity: 250 Pieces

• Brand Name: Jaivic
• Material: Metallised Polypropylene Film
• Surface Treatment: Zinc Coated
• Thickness: 5,6,7,8 and 10 Micron
• Capacity: Up to 100 MFD

metallized film capacitor, PVC Film, form foils

metallized film capacitor, FILMS

Metallised Polyester Film Capacitors - Economic type.

metallized film capacitor, Industrial power capacitor, Ht Capacitor