Electric Motors Dealers in Sachin, Surat

• Motor Brand: Aarti
• Phase: Single Phase
• Speed: 100-200 RPM
• Motor Voltage: 0.5 HP
• Voltage V: 220-240 V
• Body Material: Mild Steel

• Material: M.S
• Size: 115 MM TO 450 MM
• Shape: Circular
• Country of Origin: Made in India

Enclosed in a robust, grey cast iron housing with ample cooling fins to ensure better heat dissipation. Construction complies with protection requirements of LP 44/IP55 as per IS: 4691 / 1985. Dynamically balanced pressure die-cast rotors with minimum vibration. Deep groove ball bearings to carry relatively heavy redial thrust loads, resulting in long life. Cooling fan located on the non-driving side together with cooling fins provides adequate flow of air and ensures an efficient cooling system. Motor is tested conforming to IS: 325 / 1996 and IS: 7538 / 1996. Specially designed to withstand the low voltage variation of 200- 240V/ 350-440V, 50Hz, AC power supply. Low operating temperature with class A insulation ensures long trouble free operation and increased winding life. Applications Machine tools, Various Industries, Agriculture and Farming machinery, Flour  Mills, Pumping, Wood/ Stone cutting machines, Textile equipment.

linear motors, Servo Motors, Programmable Logic Controllers, Cnc Controller

Center Motor is used for all electronic rolling shutters. They enable the smooth operation of the shutters.

This is nothing but a simple electrical motor, controlled with the help of servomechanism. If the motor as controlled device, associated with servomechanism is DC motor, then it is commonly known DC Servo Motor. If the controlled motor is operated by AC, it is called AC Servo Motor.    There are some special types of application of electrical motor where rotation of the motor is required for just a certain angle not continuously for long period of time. For these applications some special types of motor are required with some special arrangement which makes the motor to rotate a certain angle for a given electrical input (signal). For this purpose servo motor comes into picture. This is normally a simple DC motor which is controlled for specific angular rotation with help of additional servomechanism (a typical closed loop feedback control system). Now day’s servo system has huge industrial applications. Servo motor applications are also commonly seen in remote controlled toy cars for controlling direction of motion and it is also very commonly used as the motor which moves the tray of a CD or DVD player. Beside these there are other hundreds of servo motor applications we see in our daily life. The main reason behind using a servo is that it provides angular precision, i.e. it will only rotate as much we want and then stop and wait for next signal to take further action. This is unlike a normal electrical motor which starts rotating as and when power is applied to it and the rotation continues until we switch off the power. We cannot control the rotational progress of electrical motor; but we can only control the speed of rotation and can turn it ON and OFF.

• Step Angle: 1.8 Degree
• Speed: 2000-6000 RPM
• Voltage: 24 V
• No. of Phase: 2
• Brand: Siemens

• Power: 120-10000 KW
• Voltage: 3.3 KV, 6.6 KV, 11KV
• Phase: 3 Phase

• Speed: 960-3000 RPM
• Phase: Three Phase
• Material: MS
• Motor Power: 1-12.5 HP
• Motor Voltage: 220-440V
• Frequency: 50-60 Hz

=

Crane Duty motors are designed to have high starting torque with low starting currents. These characteristics ensure that the motors have high acceleration torques that are required in frequent start/ stop applications. These motors can serve as auxiliary motors in rolling mills or wherever intermittent drives are required. These are duty type rated motors developing high starting torque with low starting current. The motors are suitable for frequent starts/stops and reversals. Also rapid acceleration is achieved by high pull out torque/rotor inertia ratio. Crane duty motors are suitable for 3 phase supply and can be wound for any single voltage from 220 to 650 volts and frequencies from 40 hz to 60 hz. The motors are rated at 400C ambient temperature. For temperatures other than 400C, a duration factor has to be applied as indicated below.

• Altitude: 1000 mtrs
• Ambient: 40°C
• Available in Two Speed Model: 2880 / 1440
• Available HP : 0.10/0.50/1.0
• Class of insulation: F
• Duty: S1  - Continuous
• Enclosure: TEFC
• Enclosure: IP 54 / IP 55
• Frequency, Hz: 50 to 250 
• Lubrication type: ZZ Bearing with Grease Lubrication
• Mounting: B3 / B5
• No. of bearings: Two
• Phase: Three
• Power factor, lag: 0.75
• Speed, rpm: 1440
• Temperature rise: B
• VFD Operation: Possible
• Voltage, V: 415 +/- 10%

Oil Burner for L.D.O. H.S.D. Diesel. Available for Pyrolysis Oil & Kerosene. Step less Fully Modulating operation oven the range New designed proportional pressure ratio system for the modulation Version MD. Adjustable Combustion Head for fine tune regulation and matching with different shapes of combustion chamber. Compact in overall dimensions. Compatible with any type of combustion chamber. Monoblock electrodes for easy and steady installation in to the nozzle ev after maintenance . Photo resistance flame scanner . Completely sealed aluminium casing wrapped with a New Modern Design cover.

We are well known for supplying of wide variety of Magnetic Stator.

Gear Motor, Planetary Gear Box

Hydraulic Motors, hydraulic machinery, Hydraulic Products, Hydraulic Pump

Industrial Electric Motors, Brake Motors, Clutch Motor

Electronic Motor

Carbon Brushes, Electric Equipment, cables scrap, Ht Capacitors

variable speed motor, electrical product, insulating materials

Electric Motor, Electric Motor Energy Auditing Service, Brake Motor

planetary Geared Motors, Custom Built Gearbox, planetary gear boxes

Electric Motors, Industrial Pumps, centrifugal domestic pumps, Pump Spares

Electric Motor, Gear Box, Pump, Siemens

SPDP Motors

Induction Motor, led rgb driver, led pedestal lights, switch gear product

rolling door motor, Pp Filler Cord, copper coated wire

Electric Motors, Electrical Instruments, Gensets

DC Motors, measuring equipment, temperature meters, variac transformer

DC Motor, AC Motor, Transformers, AC Generator, Transformer Parts

Electric Motors, commercial lights, electric light, led focus light