Navkar Engineering Udhna, Surat, Gujarat

Up/down movement is accomplished through the use of an ergonomically designed pendant with low-effort, color coded thumb levers. After positioning the load with the pendant control, the unit defaults into a “Float”; mode that allows the operator up to 18 in (457 mm) to manually adjust the load for final positioning. Features Ergonomic Up/Down pendant control for variable speed and feathering of load If the air supply is ever interrupted, the unit will maintain the load in the suspended position If the load is accidentally lost, a spring loaded centrifugal brake automatically stops the rapid upward cable travel The load being lifted can never exceed the unit’s maximum rated capacity at a given air pressure Eliminates the down-drift of suspended loads within 6 inches (152 mm) if air supply is shut down Length of wire rope up to 30 ft (9.1 mm) with cable travel up to 120 inches (3048 mm) depending on model and configuration Suspension kits are available for virtually all enclosed track manufacturers, as well as I-beam, Patented/Hardened track, and Hook mounted configurations

Features Designed for heavy duty cleaning of equipment and washing down parts with detergents, caustics, and dilute acid type cleaners!! 10:1 ratio double acting pump section is separated from the air motor to prevent any cleaning solution from coming in contact with and damaging the air motor Mounting versatility – wall mounted or directly mounted in 2” bung of a standard 55 gal. drum Reliable 4-1/4″ diameter air motor, 4″ stroke, stub mounted

A pendant handle that contains a rocker switch for quick up/down load positioning. Float mode is active at the touch of a button. Features Intuitive speed control for a variety of different weights Electric controls plus air operation give you continuous duty cycle with minimal maintenance Eliminates the potential to accidentally drop a part 3 speed selector enables speeds to match each application and operator comfort level Lift and lower is the default mode of the InteLIFT unit and allows the operator precision handling of variable weight loads Allows the operator to manually raise, lower and position “Float” a load with virtually no part weight or resistance to the operator Is part of the new “Intelligence” for balancers and allows dumping or pouring of material while maintaining load position and stability Allows for the automatic release of a load by a Handling Device once the load is lowered and no longer supported by the InteLIFT

Featuring flexible-yet-durable internal fluid checks with a slotted-reed design that permits stringy, fibrous materials to pass through the pump. Its compact size, rugged constriction and ability to be plumbed and mounted in any of 360-degrees make Flex-Check the most flexible fluid handling pump available on the market.

Features Robust construction with thick walled injection, molded fluid casings and Cast Iron or Aluminum center sections to withstand the toughest industrial applications!! Efficiency – Motor design delivers optimum air efficiency Reliability – ARO’s patented “Unbalanced” air valve ensures no-stall operation Versatility – Multiple porting options for your application needs – Available in Flanged, Threaded, or 3 piece Manifold configurations Environmentally Sound – Bolted construction for leak-free fluid handling Serviceability – Easy access to ball checks and fluid caps for maintenance and repairs

  Features Unmatched performance for pumping grease!! 2” Diameter air motors provide a 50:1 pressure ratio for transporting grease within a service garage or maintenance environment!! LP packages offer convenient equipment available for immediate assembly and use  

50/50 Mixing of Antifreeze & Water   Features This 1:1 ratio, one-inch diaphragm pump has dual inlets (3/4-inch NPTF) to allowsimultaneous pumping and blending of antifreeze and water. Accessories 66100 Wall mount bracket

The InteLIFT® “IC” series balancers come standard with a force-sensing load cell that converts small levels of operator force into up/down movement through the full lifting range, without the need for up/down pendant controls. These models also come equipped with a 12 ft (3.7 m) twin-bonded pre-coil cable including air hose and electronic control hose. Features Intuitive speed control for a variety of different weights Electric controls plus air operation give you continuous duty cycle with minimal maintenance Eliminates the potential to accidentally drop a part 3 speed selector enables speeds to match each application and operator comfort level Senses force input of the user and translates it to assisted lifting and lowering of the load without the need for pushing additional up/down buttons. Lift and lower is the default mode of the InteLIFT unit and allows the operator precision handling of variable weight loads Is part of the new “Intelligence” for balancers and allows dumping or pouring of material while maintaining load position and stability Allows for the automatic release of a load by a Handling Device once the load is lowered and no longer supported by the InteLIFT Allows the operator to manually raise, lower and position “Float” a load with virtually no part weight or resistance to the operator

The pendant handle contains a rocker switch for quick up/down load positioning. Float mode is active at the touch of a button. Features Intuitive speed control for a variety of different weights Electric controls plus air operation give you continuous duty cycle with minimal maintenance Eliminates the potential to accidentally drop a part 3 speed selector enables speeds to match each application and operator comfort level Lift and lower is the default mode of the InteLIFT unit and allows the operator precision handling of variable weight loads Allows the operator to manually raise, lower and position “Float” a load with virtually no part weight or resistance to the operator Is part of the new “Intelligence” for balancers and allows dumping or pouring of material while maintaining load position and stability Allows for the automatic release of a load by a Handling Device once the load is lowered and no longer supported by the InteLIFT

The InteLIFT® Basic unit comes with no controls and is designed to be integrated with a Handling Device and operated with the Handling Device’s control package. Features Intuitive speed control for a variety of different weights Electric controls plus air operation give you continuous duty cycle with minimal maintenance Eliminates the potential to accidentally drop a part 3 speed selector enables speeds to match each application and operator comfort level Lift and lower is the default mode of the InteLIFT unit and allows the operator precision handling of variable weight loads Allows the operator to manually raise, lower and position “Float” a load with virtually no part weight or resistance to the operator Is part of the new “Intelligence” for balancers and allows dumping or pouring of material while maintaining load position and stability Allows for the automatic release of a load by a Handling Device once the load is lowered and no longer supported by the InteLIFT

Can deliver up to 1/4-ounce of lubricant per stroke!! Includes 72006 drum cover, 622511-10 hose assembly, 640095-3-B follower plate and 72806 booster control handle capable of generating up to 7,500 psi

Features The Ultimate Process Pump designed to minimize downtime!! The new EXP is 20 – 40% more efficient than our competitors!! Efficiency – Simul-Shift™ valve provides ultra-positive, reliable shift signal Reliability – ARO’s patented “Unbalanced” air valve ensures no-stall operation Versatility – Broad range in materials of construction for optimum fluid compatibility Environmentally Sound – Bolted construction for leak-free fluid handling and ribless fluid caps to eliminate cracking Serviceability – Easier service through modular design  

When the pendant is in the LO- and UN-LOAD position, balancer air pressure is released to allow the lighter loads to be in balance. When the pendant is in the HI-LOAD position, no pressure is released, and the heaviest load can be balanced. The “EA” series balancers are ideally suited for applications where up to 3 load sizes are frequently lifted, and operator hands-on the part is required. The UN-LOAD position is also often used for handling device balancing (loaded/unloaded). Features Rotary thumb switch pendant selects HI-LOAD, LO-LOAD, or NO-LOAD setting If the air supply is ever interrupted, the unit will maintain the load in the suspended position If the load is accidentally lost, a spring loaded centrifugal brake automatically stops the rapid upward cable travel The load being lifted can never exceed the unit’s maximum rated capacity at a given air pressure Eliminates the down-drift of suspended loads within 6 inches (152 mm) if air supply is shut down Length of wire rope up to 30 ft (9.1 m) with cable travel up to 120 inches (3048 mm) depending on model and configuration Suspension kits are available for virtually all enclosed track manufacturers, as well as I-beam, Patented/Hardened track, and Hook mounted configurations

Features Perfect for removing your chemical from any 55-gallon drum!! ARO Drum Pumps are available in Aluminum, Stainless Steel or Polypropylene body materials Stall-Free Operation – ARO Diaphragm Drum Pumps feature a patented “Unbalanced” air valve design that avoids stall-out, even under low air-inlet pressures. Bolted Construction – Unlike traditional band-clamp style pumps, ARO Diaphragm Drum Pumps utilize bolted fasteners for leak-tight integrity. Factory-Matched – ARO Drum Pump Package components (adapters, siphon tubes, etc.) contain pre-specified, matching materials of construction for complete fluid compatibility.

Compact Design 360º Mounting Versatility when using optional flex checks Ideal for OEM Applications Creates a 31-feet of suction lift 5.3 GPM (20.1 LPM) flow.

Calcium Chloride Tire Fill 613201-2-C   Features Designed for the purpose of evacuating and filling tires with calcium chloride ballast solution. 613201-2-C Calcium Chloride Tire – Fill Package: Includes Inlet and outlet hoses, Strainer, Tire Filling 8′ Suction hose, Control handle, and Check valve

  Features High-Flow, High-Pressure Integrated wet cup ensures extended pump life!! Reliability – Eliminating downtime, the unbalanced air valve ensures stall-free pump operation Durability – Hard chrome plated plunger improves abrasion resistance Versatility – Multiple materials of construction for your application needs Environmentally Sound – Muffler ensures pump meets OSHA specifications Serviceability – Minimal part count combined with Tie Rod construction for simple, efficient repairs

The operator experiences virtually no part weight or resistance in manipulating the load. The “BA”; controller is a self-relieving regulator that automatically adds or exhausts air to raise or lower (float) the load to the desired height where it will remain suspended. The regulator can also be adjusted to slowly raise a load up and out of an operators way. The primary application for the “BA” series balancer is for suspending and/or positioning constant weight items. Features Standard Z-Servo control (BA balancers over 200 lb (90.7 kg)) amplifies the inputs and reduces the effort required to lift the load If the air supply is ever interrupted, the unit will maintain the load in the suspended position If the load is accidentally lost, a spring loaded centrifugal brake automatically stops the rapid upward cable travel The load being lifted can never exceed the unit’s maximum rated capacity at a given air pressure Eliminates the down-drift of suspended loads within 6 inches (152 mm) if air supply is shut down Length of wire rope up to 30 ft (9.1 m) with cable travel up to 120 inches (3048 mm) depending on model and configuration Suspension kits are available for virtually all enclosed track manufacturers, as well as I-beam, Patented/Hardened track, and Hook mounted configurations

The “B” series balancers come standard with NO CONTROLS, and are designed for integration with an end effector or handling device that includes a control package. Features If the air supply is ever interrupted, the unit will maintain the load in the suspended position If the load is accidentally lost, a spring loaded centrifugal brake automatically stops the rapid upward cable travel The load being lifted can never exceed the unit’s maximum rated capacity at a given air pressure Eliminates the down-drift of suspended loads within 6 inches (152 mm) if air supply is shut down Length of wire rope up to 30 ft (9.1 m) with cable travel up to 120 inches (3048 mm) depending on model and configuration Suspension kits are available for virtually all enclosed track manufacturers, as well as I-beam, Patented/Hardened track, and Hook mounted configurations

9:1 Ratio 4 1/4” Air Motor 3.9 GPM (14.8 LPM) max flow