Petrochem Engineers Udhna, Surat, GJ

"To prevent corrosion during acid cleaning of the metal and protection of the surface for certain period where corrosion is likely to be occurring" is the main function of Corrosion Inhibitor SAC-CI. The Corrosion Inhibitor SAC-CI contains amine base organic reaction products with suitable blend of oils and emulsifiers in it, which creates layer (film) on the surface protecting it from corrosion. Our Corrosion Inhibitor SAC-CI offers high efficiency in inhibiting the rusting of the items on which they are used. Benefits Of Using Corrosion Inhibitor SAC-CI : Prevent corrosion/pitting problems during acid cleaning of the surfaceCan be used on Brass Alloy, Nickel, Copper, SS, MS etc.Increases metal life thereby increase profitability of the companyPrevents accidental collapse of the plant and machineryDecreases frequent shutdowns, periodical cleaning of the surface Direction For Use : SAC-CI is a homogeneous liquid and its dose depends on the type of the metal and the material used for cleaning. As a general guideline, 0.25 to 1.0% dose on the basis of acid is sufficient. Storage : Store the product in a cool and dry place away from direct sunlight. Packing : The product is available in 5 to 200 kg HDPE carboys. Safety Precautions : Before handling the product, refer material safety data sheet which contains detailed information about this product (available on request).

Corrosion Inhibitor SAC-CIC-1 is a nitrates based cooling water treatment which provides superior corrosion protection to multi metal system, operating at high or low temperature. The Corrosion Inhibitor SAC-CIC-1 is a Close Loop System recommended for internal combustion engines, water heating system, chilled water circuit and other closed system. Our Corrosion Inhibitor SAC-CIC-1 is the best option for cleaning water containing ferrous and non-ferrous metals. Applications Of Corrosion Inhibitor SAC-CIC-1 : In engine – jacket cooling waters precludes the necessity for pre-softening or demineralising this water.Prevent deposits, scale, and sludge and resultant losses in heat transfer of mechanical efficiency caused by high-mineral water.It does not affect non-metal components. Advantages : Prevents scale and sludge Compatible with anti freeze solution No chromates Inhibits multi-metal systems Special Advantages : SAC-CIC-1 saves electricity, ensures lower cooling time, increases production, reduces production cost, and increases cooling capacity of condensers & other equipments. It maintains head pressure for optimum cooling, provides excellent protection to steel, copper, brass, aluminium, etc and increases life of equipments. Usage Method : SAC-CIC-1 may be added directly, as received, to the engine –cooling system. For chilled and hot-water systems, SAC-CIC-1 may be added directly to close circulating water from the drum, with a bypass feeder or any convenient means. Safety And Handling : SAC-CIC-1 is almost non-hazardous. Keep the container closed when not in use. The product should not be swallowed and prolonged contact with skin should be avoided. Should it come in contact with the eyes, flush with clean & cold water and get medical attention. Packing : SAC-CIC-1 is available in 50Kg carboy or as per requirements.

Metals are widely used in the construction of equipment associated with aqueous systems in which metals remain in contact with aqueous fluids on a regular basis, for example, hydro-testing of metallic equipments, fire extinguishing systems containing water, cooling or heating systems, heat exchangers and many more. The aqueous system generally contains vessels, piping, valves, etc. When water comes in contact with these systems, corrosion of the metal, during and after contact, is a concern. Corrosion Inhibitor SAC-CI 100 when added to water in small concentrations is able to prevent corrosion during wet storage. The corrosion inhibitor prevents corrosion even after vacating water from the system. Our Corrosion Inhibitor SAC-CI 100 is a combination of corrosion inhibitors, alkalinity builders, passivator, surface modifiers, chelating agents, oxygen scavenger and capable to protect various metals from corrosion even in the presence of relatively high concentrations of Chloride and Sulfate ions. The Corrosion Inhibitor SAC-CI 100 is suitable to reach every corner of the part / system that requires protection from severe corrosive atmosphere. Mechanism : The mechanism of Corrosion Inhibitor SAC-CI 100 is to prevent corrosion of metals in three phases: within the solution, at the water line, and above the water line. Our Corrosion Inhibitor SAC-CI 100 also prevents corrosion in the areas which are not reachable with other corrosion inhibitors. Features And Benefits Of Using SAC-CI 100 : No heavy metalsProvides up to 24 months of continuous protectionProvides mono-molecular inhibiting layer (protection layer) Additional Benefits : The product provides vapor-phase inhibiting action which protects inaccessible and recessed surfacesNo regeneration required; effective for up to 24 monthsIf the protective layer is disturbed by moisture or opening of the enclosed space, the layer is replenished by continuous vapour protectionLittle or no surface preparation required and easy to applyPrevents further corrosion of the pre-coated and painted surfacesThe protection layer does not need to be removed prior to processing or useThe protection layer does not interfere with operation of mechanical components Application And Additional Applications : Typical aqueous systems include, but are not limited to : Open re-circulating cooling systems, closed loop cooling systems, boilers and similar steam generating systems, fire fighting systems where water remains in constant contact with water, heat exchange equipment, reverse osmosis equipment, oil production systems, flash evaporators, desalinization plants, gas scrubbers, blast furnaces, paper and pulp processing equipment, steam power plants, geothermal systems, food and beverage processing equipment, sugar evaporators, mining circuits, bottle washing equipment, soil irrigation systems, closed circuit heating systems for residential and commercial use, aqueous-based refrigeration systems, down-well systems, aqueous machining fluids (e.g. for use in boring, milling, reaming, broaching, drawing, turning, cutting, sewing, grinding and in thread-cutting operations, or in non-cutting shaping, spinning, drawing, or rolling operations), aqueous scouring systems, aqueous glycol anti-freeze systems, water/glycol hydraulic fluids, ferrous-surface pre-treatment, polymer coating systems, and the like. Various types of water may be utilized in such systems, for example fresh water, brackish water, sea water, brines, sewage effluents, industrial waste waters. Additionally The Product Is Very Suitable For The Following : Hydro-testingLong term storage of waterTubular structures, pipes and vesselsInternal surfaces of compressors, turbines, engines, tanks, boilers, heat exchangersClosed circuit cooling systemsEquipment protection after hydrostatic testing Metals Protected : Carbon steelMild steelStainless steelCopperBrassAluminium Direction For Use : The product dose depends on quality of water and corrosive tendency of atmosphere also in some cases. But in general 10 to CI 1000 PPM is sufficient. More particularly, the dose may be 300-500 PPM. The product may be dosed by a slug feed or by blending with the aqueous fluid as the system is being filled. One can dose the material continuously using metering pump also. The pH of the aqueous system in which the product may be applied ranges from about 5 to about 12. The pH is preferably in the range from about 6 to about 10. The dosage can be increased for more severe conditions. Storage : Store in a sealed container in a dry warehouse, avoiding direct exposure to sunlight, with temperatures not exceeding 150oF (66oC). Under these conditions, shelf life is up to 24 months. Packing : The product is available in 50 to 200kg HDPE carboys. Safety precautions : Before handling the product, refer material safety data sheet which contains detailed information about this product (available on request).

Water Treatment Additives SACY-4000PN-6 is an acrylic Homo Polymer partially neutralized with sodium salt. Our Water Treatment Additive SACY-4000PN-6 is used for various water treatment and industrial applications like textile wet processing, paint, detergent etc. The product Water Treatment Additive SACY-4000PN-6 being a low molecular weight polymer has good anti-gelling capacity and so best calcium / magnesium / barium trapping ability working over wide range of pH, high hardness and temperature without precipitation. Apart from thermal stability, the Water Treatment Additive SACY-4000PN-6 has good stability over oxidizing agent like chlorine. The Water Treatment Additives SACY-4000PN-6 is non-phosphorus, nonfoaming dispersant and has good environmental acceptability. Advantages : Water Treatment: It is very widely used in industrial water treatment as dispersant and scale inhibitor. It inhibits build up of scale by solubility enhancement, crystal growth modification and the dispersion property of the low molecular weight polymer structure. Textile: In textile wet processing SACY-4000PN-6 is used in preparation, dyeing and formulations as dispersant and stabilizer. Its use abates problems arising due to water hardness viz. incrustation on textile, scum formation in processing and build of scale on machinery. It improves overall process outputs, shade brightness, levelness and feel of the textile. Detergent Additive: SACY-4000PN-6 as sodium salt is used as a builder / water softening agent in no phosphate or low-phosphate, low-foaming detergent formulations. Construction: It is widely used in construction chemicals formulations also. Dosage : Most common doses of SACY-4000PN-6 are between 1 – 10 PPM. However, the dosage varies depending upon use conditions and the end effect envisaged. Safety And Handling : SACY-4000PN-6 is generally safe but avoid contact with eyes. Do not take internally. In case of contact with skin, wash with plenty of water. In case of contact with eyes, flush with water and get prompt medical attention. Gloves and goggles are necessary while handling the product. Storage : SACY-4000PN-6 is non-flammable, and non-combustible. It should be stored under shade. Keep the product away from direct sunlight. Packing : SACY-4000PN-6 is available in 55Kg Carboy / 250Kg Polydrum.

Water Treatment Additives SACY 1400 is a Carboxylic – Sulphonate co-polymer used for various water treatment and industrial applications. Our Water Treatment Additive SACY 1400 is highly effective as Dispersant and Scale Inhibitor in Industrial Water Treatment and Cooling Water Treatment as well as in all types of water based formulations. The product Water Treatment Additive SACY 1400 being a low molecular weight polymer has good anti-gelling capacity and so has best calcium trapping ability working over wide range of pH, high hardness and temperature without precipitation. Strong acidic functional group like sulphonic acid in the monomer plays an important role in imparting more negative charge on iron oxide particles. It is well known that higher the negative charge imparted on the particles, stronger the repulsive force between the charged particles and hence better dispersant. It is suggested that the substitution of Carboxylic group with stronger acidic and bulkier groups like sulphonic acid markedly improves the dispersant power of the polymer. The Water Treatment Additive SACY 1400 is non-phosphorus; non-foaming dispersant and has good environmental acceptability. Advantage : SACY 1400 is very widely used in industrial water treatment as dispersant and scale inhibitor. It inhibits build up of scale by solubility enhancement, crystal growth modification and the dispersion property of the low molecular weight polymer structure. Safety And Handling : SACY 1400 is generally safe but avoid contact with eyes and prolonged contact with skin. Do not take internally. In case of contact with skin, wash with plenty of water. In case of contact with eyes, flush with water and get prompt medical attention. Gloves and goggles should be used while handling the product. Storage : SACY 1400 is non-flammable, non-combustible. It should be stored under shade. The product should not be exposed to direct sunlight. Packing : SACY 1400 is available in 55Kg Carboy / 250Kg Polydrums

Water Treatment Additives SAC– 1053-A is a carboxylic-sulfonate Terpolymer used for various water treatment and industrial applications. Our Water Treatment Additive SAC– 1053-A is highly effective as Dispersant and Scale Inhibitor in Industrial Water Treatment and Cooling Water Treatment as well as in all types of water based formulations. Our Water Treatment Additives SAC– 1053-A being a low molecular weight polymer have good anti-gelling capacity and so have best calcium trapping ability working over wide range of pH, high hardness and temperature without precipitation. Strong acidic functional group like sulfonic acid plays important role in imparting more negative charge on iron oxide particles. It is well known that higher the negative charge imparted on the particles, stronger the repulsive force between the charged particles and hence better dispersant. It is suggested that the substitution of carboxylic group with stronger acidic and bulkier groups like sulfonic acid in carboxylic polymer markedly improves the dispersant power of the polymer. Our Water Treatment Additive SAC– 1053-A is non-phosphorus, non-foaming dispersant and has good environmental acceptability. Advantage : SAC– 1053-A is very widely used in industrial water treatment as dispersant and scale inhibitor. It inhibits build up of scale by solubility enhancement, crystal growth modification and the dispersion property of the low molecular weight polymer structure. Safety And Handling : SAC– 1053-A is generally safe but avoids contact with eyes and prolonged contact with skin. Do not take internally. In case of contact with skin, wash with plenty of water. In case of contact with eyes, flush with water and get prompt medical attention. Gloves and goggles should be used while handling the product. Storage : SAC– 1053-A is non-flammable, non-combustible. It should be stored under shade. The product should not be exposed to direct sunlight. Packing : SAC– 1053-A is available in 55Kg Carboy / 250 Kg Polydrums