Purlin Dealers in Surat

All the secondary members are made from Pre-Galvanized steel of 120/180/275 GSM coating and steel plates conforming to IS 1161/2062 or equivalent with minimum yield strength of 340 Mpa. All secondary members are available in a thickness range of 1.2 mm to 2.5 mm and supplied with a coat of Red Oxide primer (if not made from GI).

Purlins and girts are roll formed Z sections, 200 mm deep with 64 mm flanges shall have a 16 mm stiffening lip formed at 45˚ to the flange. They are supported on columns, rafters or building walls. They can be lapped and nested at the supports which creates a continuous beam configuration. They are placed on the roof and perimeter of the building. Hence they serve as a support to the roof sheeting and wall cladding.

• Material: Galvanized Iron
• Country of Origin: Made in India
• Length: 12000 mm
• hape: C Shape
• Usage/Application: Construction
• Technique: Cold Rolled
• Position: Exterior
• Yield Strength: 254 Mpa
• Thickness: 3 mm