Sealant Dealers in Adajan, Surat

Metacaulk® 1000 is a water-based, flexible, highly intumescent sealant designed for use on metal, insulated, fiber glass and plastic pipes. It can also be used for top of the wall construction joints, as well as power and telephone cables. STC rating 54, Tested in a UL 411 wall assembly/section to ASTM E90.   Metacaulk® 1000 will prevent the spread of flames, smoke, hot gases and water through joint openings and through penetrations. No dilution or mixing is required for use. No special skills are necessary for installation. Metacaulk® 1000 has passed ASTM E 1966/UL 2079 for top of the wall applications with or with out backing and as little as 1/4 inch depth of caulk. The test assembly was also subjected to 500 cycles on a specially built machine that successfully demonstrated the product's durability and movement characteristics.   Metacaulk® 1000 is applied with a conventional caulking gun, bulk loading gun or can be troweled from the pail For large applications, it can be pumped directly from the pail. • UL Classified systems up to 4 hours • Meets ASTM E 814, UL 1479 & UL 2079 Standards • Excellent Freeze-Thaw • Non-sagging, non-toxic, no VOC's • Flexible Set • Economical • Highly Intumescent • For interior use - Paintable • Available in cartridges & pails

• State: Liquid
• Type: Crack Filler Paste
• Packaging Type: Plastic Bucket
• Packaging Size: 0-5kg,5-10kg
• Use: Crack Filling

• Brand Name: PARAS DIAMOND CO
• Color: As Per Your Requirement
• Application: Industrial Use
• Size: As Per Your Requirement
• Type: As Per Your Requirement
• Country of Origin: India

"PARAS DIAMOND CO." make Single point "bruted diamond" dressers are made with selected "Congo Rounds" mounted in a matrix.A Single cutting edge is presented to the grinding wheel.Diamonds for single point dressers are selected in accordance with quality and size. The question of using a superior, average or commercial quality, depends on the grinding finish required and the machines and working parameters.We offer three grades namely NS - A, NS - B, and NS - C for all the diamond size, Availability: 0.25 Ct to 5.00 CtGuideline for Single - Point Diamond Dressers :Considerable care should be taken in mounting the diamond dresser in position. Diamonds are sensitive to shock and impact.The dresser must be clamped rigidly in place to avoid vibration once dressing begins.An ample supply of coolant should be directed at the diamond point before dressing begins, as the sudden application of coolant to the diamond once it has heated up can cause it to shatter.The diamond holder should not be set directly on the center of the grinding wheel, but at an angle of5-15 to the direction of rotation of the wheel so that it appears to be "trailing"At normal wheel peripheral speeds, dressing rates of approximately 20-25 m/sec can be achieved.The maximum depth of cut achieved per dressing pass is 0.03 mm or on fine grit wheels,approximately 0.005-0.01 mm.The cross feed rate is dependent upon grit size and can have a marked influence on the quality of the finish imparted to the grinding wheel surface. The lower the feed rate, the finer the surface finish.We would recommend the following feed rates per revolution of the grinding wheel. Single Point Diamond Dressers Grinding Wheel Grit Size Feed rate in mm/rev 30-46 0.60 -0.30 50 120 0.30 0.10 180 320 0.10 0.02  

Natural stones are very delicate and if not treated properly, they can be affected easily by stains etc. To protect them with these harmful effects, we offer a wide range of qualitative stone sealer. We have firmly positioned ourselves as one of the salient marble sealer exporters and suppliers in India. Our natural stone sealer is very effective and safe to use.

Diamond Tools, Stationary Products

Silicone Sealant, spray, clay products