Siemens Drives Dealers in Surat

Siemens Drive Technologies has been enhancing customer productivity and efficiency in industries ranging from aerospace, automobiles, and oil and gas to plastics, packaging, logistics and material handling. The division offers complete electrical and mechanical technologies and components including standard and large drives applications covering the entire drive train. Drives Technology Factory and Process Automation Low Voltage Switchgear and Motor Manufacturing Execution Systems Products and Systems for Industry Products for Building and Infrastructure Windmill Generators Services, Maintenance and Support Training Sinamics G series general purpose drives Sinamics V series general & servo low cost drives & servo motors Sinamics S series high performance drives Sinamics DC master DC drives Redundant rectifier for high availability Regenerative rectifiers for energy efficiency & high performance braking Multi motor drives Servo motors & drives Multi axes Simotion controllers Medium voltage drives   SINAMICS V20 : Cost-effective entry-level CNCs for contract manufacturers : Medium-sized machine tools manufacturer has fitted a cycle turning machine with SINUMERIK 808D and SINAMICS V20 drives. The machine is impressive for its across-the-board precision, productivity, and priceSINAMICS G110 : The Siemens SINAIMCS G110 v/hz standard drive is a cost effective variable-frequency drive designed to be simple to install and easy to setup. The intuitive operator panel and ability to run right out of the box meet the requirements of end-users, while its space saving, compact design makes it ideal for OEMs and panel buildersSINAMICS G110D : Integrated plug-and-play power and control - Easier installation. Optional Intelligent Operator Panel (IOP) - Simple text application setup in a reduced footprint.  The IOP further assists the machine operator with a greater level of control, as well as alarm status alerts and resolution advice, so troubleshooting time is greatly reduced.Optional Power disconnect switch IP65 metal housing enclosure - Low profile for easier mounting near the motor, with no drive cabinet required, for further space savings.Direct communication - With a Programmable Logic Controller (PLC) or control via I/O inputs.AS-Interface bus configuration and optional maintenance and manual-auto switch incorporated into the drive - Easy to integrate with other hardware in an overall control schematic.Integrated brake control and quick stop functions - Higher degree of reliability in heavy-load operations. SINAMICS G110M The distributed drive, with a high degree of protection (up to IP66), has a modular design, comprised of a Control Unit and Power Module – and is designed to be used as a drive integrated in SIMOGEAR geared motors and SIMOTICS GP motors. SINAMICS G110M is extremely versatile and efficient as a result of its straightforward commissioning and user-friendliness. In combination with SIMOGEAR, the devices are completely assembled and pre-commissioned. SINAMICS G120 : The SINAMICS G120 family of closed-loop vector drives offers high levels of integrated safety, energy savings, and network connectivity. Available in ½ to 335 HP, this modular and scalable standard drive may be configured in a wide variety of designs to meet many industrial drive applications. In addition, built-in math and logic eliminate the need for a separate PLC. The EN 60204 safety functions of the SINAMICS G120 are fully integrated into the drive and include Safe Torque Off, Safe Stop 1, Safety Limited Speed and Safe Brake Control. As a result, production plants obtain greater levels of safety while requiring less overhead to integrate the drives into fail-safe, automation, and drive environments. The SINAMICS G120 vector drive also complies with NFPA 79-2007.SINAMICS G120C : SINAMICS G120C has been specially designed for machine manufacturers  looking for an economic, space-saving and easy-to-operate standard AC drive providing a surprisingly wide range of functions. This device combines compactness with superior power density and is characterized by fast installation and commissioning, user-friendly connections, and easy-to-use operating tools.SINAMICS G120D : The SINAMICS G120D is the "distributed brother" of the popular SINAMICS G120 vector drive, sharing advantages such as modularity and innovative safety technology (Safety Integrated), while complementing the range with its well-conceived design. This vector distributed drive is particularly well suited for conveyor systems and in other applications where space is at a premium. Thanks to a wide range of power ratings up to 10 HP (7.5kW), almost all inverter-related applications can be consequentially designed without electrical cabinets. Digital inputs and outputs at the unit allow sensors and actuators to be directly connected at the drive.The input signals can either be directly processed in the inverter and autonomous (independent) local responses can be initiated – or the input signals may be transferred to a central control via PROFIBUS/PROFINET – where they are processed in the context of the complete plant or systemSINAMICS G120E : SINAMICS G120E is a range of configurable enclosed variable speed drives for a broad spectrum of industrial applications, based on SINAMICS G120 modular drive components. The drives are air-cooled and available in NEMA 1 or NEMA 12 (ventilated) enclosures. All models utilize a motor side IGBT inverter with PWM technology. SINAMICS G120E is offered with three variants on the line sideSINAMICS G120E is a range of configurable enclosed variable speed drives for a broad spectrum of industrial applications, based on SINAMICS G120 modular drive components. The drives are air-cooled and available in NEMA 1 or NEMA 12 (ventilated) enclosures.All models utilize a motor side IGBT inverter with PWM technology. SINAMICS G120E is offered with three variants on the line side.SINAMICS G130The SINAMICS G130 AC drive offers a very compact power density that is easily integrates into enclosures  by specialist drive panel builders, system integrators, and OEMs. The basic SINAMICS G130 drive system consists of a power module and controller, which can be mounted together or separately. The compact and quiet AC/AC G130 power module with state-of-the-art IGBT power semiconductors and an innovative air cooling concept provides low-loss operation for the highest energy efficiency, and is ideal for all applications that do not require regeneration back into the power supply system.SINAMICS G150Siemens SINAMICS G150 is an enclosed, air cooled or water cooled (optional), variable speed drive ideal for applications that do not require regeneration back into the power supply system. This very compact, quiet drive includes an AC/AC power module with state-of-the-art IGBT power semiconductors and an innovative cooling concept that provides low-loss operation for extremely high energy efficiency.  All units include a controller (CU320) with PROFIBUS port, an advanced operator panel (AOP30), and a terminal module (TM31) for digital and analog inputs and outputs.  Standard interfaces guarantee quick integration into the plant and process control scheme, and enable easy start-up and operation.MICROMASTER 420MICROMASTER 420 standard AC drives provide the perfect combination of flexibility, performance, and ease of use.  Right out of the box this drive is ready to run less-demanding applications. The configurable I/O and Flux Current Control Mode enhance its operation for more demanding applications. This flexibility makes this product ideal for machine builders and end-users when looking to standardize on one AC drive.MICROMASTER 430 Siemens MICROMASTER 430 is the ideal AC drive for pump and fan applications. The integrated PID and pump synchronization functionality make this a cost-effective solution for flow control applications. With advanced features like energy savings mode and customizable v/hz control mode that can be programmed to match pump and fan curves, the MICROMASTER 430 will improve your productivity while saving costs. MICROMASTER 440 In the world of automation, there are certain applications which require broader functionality and a greater dynamic response. The Siemens MICROMASTER 440 is a general purpose AC vector drive specially designed for these applications. The sophisticated vector control functionality ensures precise speed control, even when sudden load changes occur. An integrated brake chopper and ability to stop at a target position without an encoder, ensures outstanding precision, even during braking and short declaration ramps. All this is possible from 0.16 HP through 350 HP (0.12 to 260 KW). Robicon W120 : Floor standing cabinet, which can be equipped with a wide variety of pre-engineered and custom options. The ROBICON W120 has the following standard features: NEMA 1 enclosure, with blowers (optional NEMA 12 ventilated with air filters) UL listing per UL508C Short circuit current rating (SCCR) 65 kA at 480 V AC Circuit breaker disconnect with flange mount operator handle, mechanically interlocked with the enclosure door Input line reactor Intelligent operator panel (IOP), door mounted for easy start-up and operation Windows based STARTER software – common to all models of the SINAMICS family ROBICON W120CP : The standard drive enclosure is a floor standing cabinet, which can be equipped with a wide variety of pre-engineered and custom options. The ROBICON W120CP has the followingstandard features: NEMA 1 enclosure, with blowers (optional NEMA 12 ventilated with air filters) Circuit breaker disconnect with flange mount operator handle, mechanically interlocked with the enclosure door Short circuit current rating (SCCR) 65 kA at 480 V AC Clean power 18-pulse front end with patented phase shifting autotransformer and input line reactor Motor side voltage source IGBT inverter with pulse width modulated (PWM) output Intelligent operator panel (IOP), door mounted for easy start-up and operation UL listing per UL508C Windows based STARTER software – common to all models of the SINAMICS family ROBICON W150CP : The standard drive enclosure is a floor standing cabinet, which can be equipped with a wide variety of pre-engineered and custom options. The ROBICON W150CP has the followingstandard features: NEMA 1 enclosure, with blowers (optional NEMA 12 ventilated with air filters) Circuit breaker disconnect with flange mount operator handle, mechanically interlocked with the enclosure door Short circuit current rating (SCCR) 65 kA at 480 VAC Clean power 18-pulse front end with patented phase shifting autotransformer and input line reactor Motor side IGBT inverter with pulse width modulated (PWM) output featuring pulse edge modulation (PEM) and optimized pulse patterns Advanced operator panel (AOP30), door mounted for easy start-up and operation UL listing per UL508C Windows based STARTER software – common to all models of the SINAMICS family.   SINAMICS S110 : The SINAMICS S110  with its built-in basic positioning system is ideal when you need to position machines axes simply, quickly, and accurately. While the positioning drive relieves the higher-level machine control system of the task, this flexible drive actually offers much more. As an alternative to a basic positioning system, the drive can be assigned set values of speed or position using analog input or a field bus interface, such as PROFIBUS, CAN, PROFINET. Additionally, the positioning drive can control a wide range of built-in safety functions with on-board safety terminals without intricate additional circuits. As a modular single-axis drive with servo functionality, SINAMICS S110 covers a power range from 0.15 HP (1-ph AC 230V) to 125 HP (3-ph AC 480V). SINAMICS S120 : SINAMICS S120 drives include high-performance single drives and coordinated drives (multiple-axis applications) with vector or servo functionalities that allow implementation of customized high performance drive solutions for the ultimate in flexibility and increased productivity. In addition to an innovative system architecture and digital communication options, these drives come in a variety of designs and cooling types, delivering performance from 0.16 to 6,000 HP, and feature efficient engineering and quick commissioning resulting from innovative tools and simple wiring.   The concept of SINAMICS S120 enclosed drive cabinet modules is innovative: configure even the most complex multi-motor common DC bus drive line-ups or highest HP multiparallel drives up to over 5,000 HP by combining standard enclosed drive modules.SINAMICS S120MThe SINAMICS S120M gives the option to move the power unit out of the control cabinet and is directly integrated with the motor on the driven servo axis. This provides advantages and a high degree of flexibility regarding existing and new machine concepts. The innovative hybrid cable reduces cabling and connects back to the central SINAMICS S120 components utilizing the adapter module 600 (AM600). The new distributed servo drive in the SINAMICS S120 series rounds off the SINAMICS drive portfolio and offers a high degree of freedom when it comes to new and existing machine conceptsSINAMICS S120 Combi : SINAMICS S120 Combi offers the tried-and-tested SINAMICS functionality with an integrated drive concept specifically matched to compact turning and milling machines. With a multitude of technical highlights, SINAMICS S120 Combi sets new standards in this drive class. SINAMICS S120 Combi combines regenerative power supply as well as 3 or 4 motor modules for spindle and feed motors in one power module. In addition, SINAMICS S120 Combi features a connection terminal for a TTL encoder. This facilitates the spindle encoder’s direct and cost-efficient connection without additional hardware.Note that the SINAMICS S120 Combi is available only when paired with Siemens SINUMERIK 828D and in some instances SINUMERIK 840D sl.SINAMICS S150  : Enclosed High Performance Regenerative Drive : SINAMICS S150 is an enclosed air-cooled AC/AC variable speed drive ideal for high performance applications that require power regeneration back into the power supply system.As standard, the unit also contains a controller (CU320) with PROFIBUS port, an advanced operator panel (AOP30) and a terminal module (TM31) for digital and analog inputs and outputs. Standard interfaces guarantee quick integration into the plant and process control scheme, and easy start-up and operation.SIMODRIVE 611U : SIMODRIVE  611 Universal (U) is globally recognized as a highly reliable drive solution with a significant installed base. This drive offers integrated positioning functionality in a standard version with output frequencies of up to 1400 Hz. SOMODRIVE 611U includes functions such as built-in point-to-point positioning, external block change, travel/positioning to a dead stop, and on-the-fly measurement.SINAMICS S210  / SIMOTICS S-1FK2 : A drive designed specifically to complement the new SIMOTICS S-1FK2 servo motors, the SINAMICS S210 servo drive system offers 5 power classes ranging from 50 to 750 watts (0.07 to 1 Hp). The drive features integrated safety functions and streamlined engineering.Connected to the higher-level PLC over PROFINET industrial Ethernet, the drive allows simpler commissioning using a web server as well as one-button tuning. Working in combination with the SIMOTICS 1FK2 servo motors, SINAMICS S210 allows for highly dynamic movement of minimal loads as well as ultra-precise movement of medium and higher loads.