Ball Valves Dealers in Surat

• Brand Name: LINET
• Material: IC SS 304/SS 316

Investment casting ss 304 ss 316 body & ball ptfe seat single & three piece design ball valve screwed end to bsp npt.

• Brand Name: Normex
• MOC: Cast Iron
• Mode of Connection: Flanged End
• Model Number: B-05, B-05 (N)
• Operation: Manual

Normex Ball Foot Valves has received a special status in negative suction pumping applications. Normex Ball foot valve is regarded as the most reliable, 100% leakproof foot valves. & is an only solution for typical priming problem.   In the application where foot valve is involved, the main concern of the user is letting away of media by the foot valve. This calls for the ‘priming.’ of the the pump which is time consuming & tedious job. If the “on-off frequency” is more, the trouble rises multifolds. A heavily leaking foot valve can also give rise to start up trouble to pump as suction line never gets filled completely. A leaking foot valve can cause not only time wastage but also delay in process industry where water is required at particular instant. In typical case of Fire fighting application, if foot valve leaks, pump is not started can cause damage to property as well as life. Even in application in irrigation / agriculture sector, where electricity is available for limited time & intermittent (in rural India) priming pump every time/any time of day & night is a loss to pumping time.   With Ball foot valve (Threaded or Flange) installed the frequent priming is totally avoided for a very long span months to years. Normex Ball foot valves (along with Ball Check & Butterfly valves) are regularly & exclusively recommended by many consultants for many years. The Plumbing, Fire, HVAC, Irrigation contractors are also convinced by the reliability of these valves all leading to customer satisfaction.   The principal features & comparison of foot valves are similar to Ball Check valves(B-01). Ball foot valve(Flange): Model B-05(N) These flangedfoot valves are available from 50mm to 200mm sizes with 6.0 kg/cm2 working pressure. Ball Foot valve (Flanged) B-05These are the check valves converted to foot valves by installing strainer to the inlet side. They are generally recommended for sizes of 250mm,300mm & 350mm NB.However,smaller sizes from 25mm TO 200mm are available & can withstand pressures of 16/10 kg/cm2 depending on size.   For normal application Model B-05(N) is recommended in the sizes from 50mm to 200mm.

• Material: Brass
• Color: Silver
• Packaging Type: Carton Box
• Country of Origin: India
• Brand Name: Poline
• Condition: New
• Media Type: Air , Gas, Water
• Available Sizes: ¼ Inch, 3/8 Inch, ½ Inch, ¾ Inch, 1 Inch, 1 ¼ Inch, 1 ½ Inch , 2 Inch , 2½ Inch, 3 Inch

Description: Crafted from high-quality brass for durability and longevity Heavy Duty. Versatile valve for controlling the flow of water, air or gases. Features a reliable, easy-to-operate ball mechanism. Suitable for various industrial and residential applications.  

• Material: Cpcv
• Application: Water Fitting
• Feature: Durable
• Pattern: Plain
• Pressure: High
• Standard: As Per ASTMD-2846

• Material: Plastic
• Shape: ROUND
• Color: White
• Application: Water Fitting
• Type: Ball Cock
• Country of Origin: India

• Size: 1.1/2inch,1.1/4inch,1/2inch,1inch,2inch,3/4inch
• Certification: ISO 9001:2008
• Material: Brass Ball Valve
• Feature: Durable
• Application: Water Fitting
• Colour: Other
• Pressure: High,Medium

Brass male-femail ball valve

• Size: 3/4inch
• Material: Plastic
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Pattern: Plain
• Feature: Blow-Out-Proof, Casting Approved
• Color: White
• Pressure: High, Low, Medium

We are capable of delivering the product range that is accessible from our massive inventory located at Bardoli(India). Our packing system is systematized in such a manner that we can handle even bulk packaging with ease. Moreover, our packing experts take care of the customized as well as standard packing demands of the clients.

• Material: Brass
• Size: 1/5 Inch
• Pressure: High Pressure
• Temperature Of Media: High Temperature
• WOG Rating: 150
• Pressure (Mpa): 300 mpa
• Also Available In: 15-50 mm

Rotary actuated ball valves valve design bs 5351 face to face asme b 16.10 material of construction astm a 216 gr wcb a 351 cf8 a 351 cf8m a 351 cf3 a 351 cf3m trims aisi 304 316 types single piece design full bore ball valves two pice design full bore ball valves three piece design full bore ball valves three peice design reduced bore ball valves end connections flanged end:- ansi b 16.5-150# screwed end:- bsp or npt:- up to size 50 mm socket weld end:- ansi b 16.11:- up to size 50 mm types of operation manual- handle operated ball valves auto- rotary actuated ball valves size ranges 25 mm to 150 mm pressure ratings class 150300600 testing standards bs 5146 api 598.

• Application: Gas
• Size: 1 inch
• Brand Name: Matrix
• Packaging Type: Box
• Warranty: 1 Year
• Type: Isolation ball valve
• Place Of Origin: Delhi
• Oprating Pressure: 5 Bar

• Material: Stainless Steel
• Size: 8mm to 50mm
• Brand: Uni-Tech
• Pressure: High Pressure, Low Pressure, Medium Pressure, Vacuum
• Temperature Of Media: Low Temperature, Medium Temperature, Normal Temperature
• Certification: ISO 90012015
• Design: Single Piece, Full Bore, Reduce Bore
• Media: Fuel, Water, Air, Gas
• WOG Rating: 150, 300, 600
• Ball Seat: PTFE, GFT, CFT
• Warranty: 1 Year
• Lever Type: Manual Hand Lever
• Seal Leakage: VI (Tight Shut Off) Zero Leakage
• Way: 2 Way
• Thread: BSP(F), NPT(F)
• Is It Branded: Branded
• I deal in: New Only
• Threaded: Yes
• Ball Material: CF8, CF8M, CF3M
• Body Material: Cast Iron, Cast Steel, CF8, CF8M, CF3M
• Features: Fine finish, Robust construction, Dimensional accuracy

• Use: Domestic and Industrial use
• Condition: New

Ball valves come in two basic designs: Floating Bail and Trunnion Mounted, with three basic construction variants: Three piece, End Entry and Top Entry with options of either full or reduced bore designs, Principally designed as an onoff isolation valve for a very wide range of temperatures and pressures they have inherent quick opening flow characteristics. Specially designed ball valves however, may offer good flow control capabilities at High Pressure. Ail ball valves offer compact actuation due to their rotary quarter-turn operation. Firesafe versions are available for use in the oil and petrochemical industries

• Material: Brass
• Port Size: 1/4" to 2"
• Color: Silver
• Brand: CG
• Usage/Application: Water
• Connector Type: Screwed End
• Pressure: High Pressure, Medium Pressure
• Media: Air, Gas, Water
• Temperature Of Media: High Temperature, Medium Temperature
• Ball Seat: PTFE

Owing to a long-term destination for our organization, we are affianced in manufacturing, exporting and supplying a huge variety of Ball Valves.

The company is one of the renowned Manufacturers and Suppliers of Ball Valves all across the country. We manufacture Ball Valves as per the international set standards. We employ the latest technology while manufacturing Ball Valve in our manufacturing unit. We offer Ball Valves in single piece, two piece & three piece design construction to suit wide range of application and pressure rating in both regular & full port construction in difference combination of body and trims. The soft-seated Ball Valve, offered by us, gives zero leakage, tight shut-off and easy smooth operation at temperature ranging. The advance feature of Ball Valves, such as Anti-Static devices ensure electrical continuity between ball, stem & body, leak proof multi seal system, blow out proof stem operate the valve safely even at high differential pressure, and lower operating torques due to high sphericity & surface finish of ball. Apart from Ball Valve, we also engrossed in manufacturing Fire Safe design Ball Valve conformance to API 607/API 6FA/BS 6755 Part II assuring highest standard of safety with third party inspection on request. Product Detail Design standard : BS5351 Inspection & testing standard :  BS 5146 BS 6755-ii/API 607/API 6fa for fire safe design Face to face :  as per ANSI b 16.10 End connection :  flanged end to ANSI b 16.5/BS 10 table socket weld end to ANSI b 16.11 Butt weld end to ANSI b 16.25 screwed end to ANSI b 1.20.1 Size range : 1/2" to 12" Pressure rating :  150# to 1500#.

HAVI LBV Series Valves are Low Pressure Lever Operated Ball Valves used for ONOFF of flow just by turning the handle Quarter turn.HAVI LBV Series Valves are Low Pressure Lever Operated Ball Valves used for ONOFF of flow just by turning the handle Quarter turn.

• Material: ABS Plastic
• Brand Name: Triton
• Color: Black
• Model Name/Number: TS1532
• Usage/Application: Automotive industries
• Overall Length: 32mm
• Rim Hole Diameter: 8.3mm