Testing Equipment Dealers in Surendranagar

• range -99.9 to 1372 °C: resolution 0.1 °C to 300 °C thereafter 1 °C
• accuracy ±0.4 °C ±0.1 % of reading: memory 16000 or 2 x 8000 readings
• sample rate 0.1 to 255 minutes: battery AA Tadiran - Li-SOCl
• display 10 mm LCD / 2 LEDs: weight 200 grams

Thermocouple ThermaData® loggers for high temperature applications waterproof housing IP6667 protection 2 channel type K or T thermocouple input wide temperature range -100 to 1372°C visual display of highlow alarm status 4 models - blind or LCD, Type K or T These two input ThermaData® thermocouple data loggers are housed in a waterproof, ergonomic case that is designed to meet IP6667 protection. Four models are available, either blind or with LCD display and with the option of a type K or T thermocouple input. The Thermocouple ThermaData®data loggers measure temperature over the range of -100 to 1372 °C with a 0.1 °C resolution, auto-ranging to 1 °C over the range of 301 to 1372 °C. At programmable intervals the loggers will record the temperature, up to a maximum of 16000 readings or 2 x 8000 readings. Each logger incorporates a red and green LED, the flashing green LED indicates that the logger is activelogging and the flashing red LED indicates that your customised pre-set alarms have been exceeded. Each logger is supplied with a USB lead and ThermaData® Studio Software.

• Application: Industrial
• Power Source: Electric
• Frequency: 50 Hz
• Brand: Mona
• Material: Mild Steel
• Voltage: 220-440 V

Salient Features :           The machines are built with fully enclosed CAST IRON body. These are SEASONED & precisely calibrated for accuracy. The special CLAMPING CONE holds the job firmly and avoids slippages. This also protects the INDENTERS. Transparent glass cover covers the dial gauge. It protects form dust damages. The loading is by square threaded screw & unloading is by eccentric lever while penetration is Hydraulic.            ROCKWELL BRINELL HARDNESS TESTER :            1. ALZ – B - 187.5           * Automatic load selector provided at right side of the machine * Automatic zero setting type dial gauge * 60, 100, 150 & 187.5 kgf major load * TO check Rockwell scale and BRINELL scale with ball Dia. 2.5 mm & 187.5 kgf load                    STANDARD ACCESSORIES :       1. One dial gauge Dia. 80 mm. 2. One flat table Dia. 50 mm. 3. One Vee grooved table for cylindrical job Dia. 6 mm to 45 mm. 4. One Diamond indenter with 120° cone angle. 5. One test block master for Rockwells “C” scale 6. One ball indenter 1/16” dia. 7. One test block for Rockwell “B” scale 8. An Allen key 3/32” and 5/32”. 9. A set of telescopic sleeve for screw protection. 10. One set of weight, 60, 100 & 150 kgf. Cast Iron. 11. Accessories kit Box for above accessories. 13. One test block master HB & 187.5 kgf. load. 14. One ball indenter 2.5mm. Dia. 19. One BRINELL Microscope. 20. One instruction Manual. 21. Levelling bots (Four) 22. One Machine Cover.        2. ALZ- B - (62.5,100,125,150)               * Manual load selection * Automatic zero setting type dial gauge * 62.5, 100,125 &150 kgf major load * TO check Rockwell scale and BRINELL scale with ball Dia. 2.5mm & 62.5kgf. & 125 kgf load                      STANDARD ACCESSORIES :       1. One dial gauge Dia. 80 mm. 2. One flat table Dia. 50 mm. 3. One Vee grooved table for cylindrical job Dia. 6 mm to 45 mm. 4. One Diamond indenter with 120° cone angle. 5. One test block master for Rockwells “C” scale 6. One ball indenter 1/16” dia. 7. One test block for Rockwell “B” scale 8. An Allen key 3/32” and 5/32”. 9. A set of telescopic sleeve for screw protection. 11. Accessories kit Box for above accessories. 13. One test block master HB & 62.5 kgf. load. 14. One ball indenter 2.5mm. Dia. 19. One BRINELL Microscope. 20. One instruction Manual 21. Levelling bots (Four) 22. One Machine Cover.        Salient Features :               The machines are built with fully enclosed CAST IRON body. These are SEASONED & precisely calibrated for accuracy. The special CLAMPING CONE holds the job firmly and avoids slippages. This also protects the INDENTERS. Transparent glass cover covers the dial gauge. It protects form dust damages. The loading is by square threaded screw & unloading is by eccentric lever while penetration is Hydraulic.                3. ALZ – B – 250               * Automatic load selector provided at right side of the machine * Automatic zero setting type dial gauge * 60, 100,150,187.5 & 250 kgf major load * TO check Rockwell scale and BRINELL scale                STANDARD ACCESSORIES:       1. One dial gauge Dia. 80 mm. 2. One flat table Dia. 50 mm. 3. One Vee grooved table for cylindrical job Dia. 6 mm to 45 mm. 4. One Diamond indenter with 120° cone angle. 5. One test block master for Rockwell “C” scale. 6. One ball indenter 1/16” dia. 7. One test block for Rockwell “B” scale. 8. An Allen key 3/32” and 5/32”. 9. A set of telescopic sleeve for screw protection. 10. One set of weight, 60, 100 & 150 kgf. Cast Iron. 11. Accessories kit Box for above accessories. 13. One test block HB for ball dia. 2.5mm & 187.5 kgf. Weight. 14. One ball indenter 2.5mm. Dia. 15. One test block HB for ball dia. 5mm & 250 kgf. Weight. 16. One ball indenter 5.0mm. Dia. 19. One BRINELL Microscope. 20. One instruction Manual. 21. Levelling bots (Four) 22. One Machine Cover.               4. ALZ-B-(62.5-125-187.5-250)       * AUTO LOAD SELECTION * AUTO ZERO SETTING TYPE DIAL GAUGE * 62.5,125,187.5,250 KGF LOAD RANGE * TO CHECK BRINELL SCALE               STANDARD ACCESSORIES :               1. One dial gauge Dia. 80 mm. 2. One flat table Dia. 50 mm. 3. One Vee grooved table for cylindrical job Dia. 6 mm to 45 mm. 8. An Allen key 3/32” and 5/32”. 9. A set of telescopic sleeve for screw protection. 11. Accessories kit Box for above accessories. 13. One test block HB for ball dia. 2.5mm & 62.5 kgf. Weight. 14. One ball indenter 2.5mm. Dia. 15. One test block HB for ball dia. 5mm & 250 kgf. Weight. 16. One ball indenter 5.0mm. Dia. 19. One BRINELL Microscope. 20. One instruction Manual. 21. Levelling bots (Four) 22. One Machine Cover.                       Any other testers can be manufactured as per the customers design We reserve the right to change in above specification due to constant improvement & development        

• Model Name/Number: HTC 830L+ Digital Multimeter
• Brand: HTC
• SKU Number: KSTM1055
• Type of Product: Digital Multimeter
• DC Voltage Range: 200mV – 600V
• DC Voltage Resolution: 100uV – 1V
• DC Voltage Accuracy: -+(0.5%Rdg+4)
• Features: 3 1/2 Digit Manual Multimeter
• Special Function: hFE test