Air Switches Dealers in Thane

Air Relay Pressure Switches offered by us are used at highly inflammable area where only pneumatic signal has to be controlled in on-off without any electrical supply. We procure these air relay pressure switches from certified vendors where these are made with extreme precision using quality scrutinized methods. We are further proficient of meeting client’s varied bulk requirements in stipulated time.

• Output: NO / NC Pneumatic
• Application: Switching USe
• Supply Air pressure: 7 bar
• Settable Range: 0.067 up to 25 bar
• Set Point: Field Settable
• Enclosure: IP 66

Air Relay Pressure Switches are used in highly flammable Industrial applications area, where only pneumatic signal has to be controlled in ON-OFF mode, without any electrical supply. These are also known as Air operated Pressure Switches & Pneumatic Pressure Switches.

Settable ranges - various ranges starting from 20 to 150 mm wc up to 100 to 400 bar differential (dead band) - adjustable temperature range : -10 to 80 degree c (for high temperature use of impulse tube is advisable) accuracy : +- 1% to 2% fs no. Of switches : one no. type of switches : micro switches - 1 spdt sensing element : diaphragm (ptfe neoprene ss 316l) or piston enclosure : dust proof (ip 40), weatherproof (ip 54 ip 65 ip66), flameproof

• Brand Name: ORION
• Media Type: Gas
• Contact System Type: SPDT
• Electrical Connection: Screw Terminals
• Contact Material: Silver
• Country of Origin: Made in India
• Current Rating: 15A
• Range Setting: 0 to 15 bar
• IP Rating: IP54, IP65, IP66
• Model Name/Number: CS-12

• No. of Poles: 3
• Rated Current: 630 A
• Frequency: 50 Hz
• Country of Origin: Made in India
• voltage level: High Voltage
• Application: Sub Station
• Voltage: 11Kv

we offer Airflow Switch.Airflow Switch is used to detect air flow or absence of air flow by responding only to the velocity of air movement within a duct. The control can be wired to open one circuit and close a second circuit (SPDT) for either signaling or interlock purposes.

• Supply Air pressure :: 7 bar
• Settable Range: : 0.067 up to 25 bar
• Output: NO / NC Pneumatic
• Set Point: Field Settable

Air Relay Pressure Switches are used in highly flammable Industrial applications area, where only pneumatic signal has to be controlled in ON-OFF mode, without any electrical supply. These are also known as Air operated Pressure Switches & Pneumatic Pressure Switches.

We are offering air break switches."Atul make" 22kv 200amp single break, tilting type, vertical mounting, gang operated switch outdoor type.

The airflow transducer ESF-35-2 is installed in such a way that the current of air passes through the gap of the sensor head. Conductors to and from the transducer should be kept isolated from high-power conductors where powerful transient voltage spikes may appear. The ESF-35-2 transducer registers the airflow speed according to a thermal principle based on the fact that the cooling action of air increases with airspeed. The action is measured and converted to a 4 - 20mA or a 0 - 10 V signal corresponding to airflow speeds from 0 - 8 ms (0 - 1575 ftmin) or 0 - 16 ms (0 - 3150 ftmin).