anandgears Bhayandar, Thane, Maharashtra

Worm Wheel Pair:. Center distance: 30 mm to 305 mm, Ratio: 5:1 to 70:1 in steps of 5 or as per requirement.

Under Drive Worm Reduction Gearbox Under driven means driven from below. Under driven worm reduction gear box is with integrated foot mounting. Under Drive Worm Reduction Gearbox Anand underdriven Worm Reduction Gearbox with integrated (solid) foot mounting.    

Hollow Input/ Worm Geared Motor Anand Hollow Input / Output Worm Reduction Gearbox combining features of "O" and "V" type gearboxes in a single unit. Built-in motor flange adapters and are suitable for all flange mounted motors (B5) or Face mounted (B14) electric motors with footings for different mounting arrangements. Under Drive Worm Reduction Gearbox Anand under driven Worm Reduction Gearbox with integrated (solid) foot mounting.

We offer worm gearbox adaptable type 8 different models from 30 mm cd to 100 mmcd(30,42,50,55,60,72,84,100) can be mounted in 6 different positions by changing foot ratio 5 to 80 insteps of 5 or any special ratio above 4.

Vertical worm reduction gearbox with integrated (solid) foot mounting available in light, medium and heavy stirrer duty. Range: 100 mm to 230 mm center distance.Output Shaft: Vertically upward or downward position.

Vertical worm reduction gearbox with integrated (solid) foot mounting available in light, medium and heavy stirrer duty. Range: 100 mm to 230 mm center distance. Output Shaft: Vertically upward or downward position.

  Vertical worm reduction gearbox with integrated (solid) foot mounting available in light, medium and heavy stirrer duty.Range: 100 mm to 230 mm center distance.Ratio: 5:1 to 70:1Output Shaft: Vertically upward or downward position.

Under driven worm reduction gearbox with integrated (solid) foot mounting.Range: 90 mm to 305 mm center distance.Ratio: 5:1 to 70:1Output Shaft: Horizontal position either RH or LH.

Double worm reduction gearbox in combination of two adaptable gear boxes or adaptable and solid foot combination with under driven or vertical gear boxes as required.

FHP right angle gear motor are available with single or three phase motors. Compact in size with foot or flange mounting arrangement.Range: 1/6 to 1 HPRatio: 5:1 to 70:1Output Shafts: As required horizontal (LH / RH) / vertical (up or down).Also hollow output shafts can be provided.

FHP right angle gear motor are available with single or three phase motors. Compact in size with foot or flange mounting arrangement.

FHP right angle gear motor are available with single or three phase motors. Compact in size with foot or flange mounting arrangement. Output Shafts: As required horizontal (LH RH) vertical (up or down). Also hollow output shafts can be provided. Range: 16 to 1 HP

Single piece universal casing with bottom & top side mounting to make drive under driven or over driven. Provision for supporting flange also make it possible for vertical output shaft. Range:- Up to 22 Kw Size :-60 mm CD to 205 mm CD Ratio :- 5:1 to 70 : 1

Single piece universal casing with bottom & top side mounting to make drive under driven or over driven. Provision for supporting flange also make it possible for vertical output shaft.

Nu series worm gearbox integrated base solid base . Size from 42 mm to 205 mm can be mounted in different positions by using flange

Single piece universal casing with bottom & top side mounting to make drive under driven or over driven. Provision for supporting flange also make it possible for vertical output shaft.Range:- Up to 22 KwSize :-60 mm CD to 205 mm CDRatio :- 5:1 to 70 : 1

Motorized worm gearbox. Mounting is overdriven horizantal.

Hollow input/ motorised worm reduction gearbox combining features of "O" and "V" type gearboxes in a single unit. Built-in motor flange adapters and are suitable for all flange mounted motors (B5) or face mounted (B14) electric motors with footings for different mounting arrangements.

Hollow input/ motorised worm reduction gearbox combining features of “O” and “V” type gearboxes in a single unit. Built-in motor flange adapters and are suitable for all flange mounted motors (B5) or face mounted (B14) electric motors with footings for different mounting arrangements.Range: 30 mm to 230 mm center distance.Ratio: 5:1 to 70:1Output Shaft: Horizontal or vertical position.

Consist of pair of bevel gears used for changing direction of rotation of shafts. In six different sizes.Range:- 0..18Kw to 7.5kw

Stage:- Single stage, double, triple and quadruple stages.Range: - Centre distance: 80 mm to 380 mmRatio:- 1.125:1 to 6.3:1Range: - Stage double, triple & quadruple stages centre distance 110 to 450 mmRatio:- 6:1 to 410:1

Stage:- Single stage, double, triple and quadruple stages. Range: - Centre distance: 80 mm to 380 mm Ratio:- 1.125:1 to 6.3:1 Range: - Stage double, triple & quadruple stages centre distance 110 to 450 mm Ratio:- 6:1 to 410:1

Double worm reduction gearbox in combination of two adaptable gear boxes or adaptable and solid foot combination with under driven or vertical gear boxes as required. Ratio: 100:1 to 4900:1, Output Shaft: As required.

FHP right angle gear motor are available with single or three phase motors. Compact in size with foot or flange mounting arrangement. Range: 16 to 1 HP Ratio: 5:1 to 70:1 Output Shafts: As required horizontal (LH RH) vertical (up or down). Also hollow output shafts can be provided.