Blow Valves Dealers in Thane

• Size: 1.1/2inch, 1/2inch, 1inch, 2inch
• Material: Carbon Steeel, Carbon Steel, Cast Steel
• Certification: ISO 9001:2008 Certified
• Application: Industrial
• Color: White
• Pressure: High, Medium
• Number Of Way: 2way
• Brand Name: UTVC make

blow down valve utvc make continuous blow down valve is an angle type valve with a needle shaped trim in a venture diffuser. The venture diffuser provides sufficient area for the high velocity flashing water, thereby avoiding choked flow.   utvc make intermittent blow down (non ibr) valves are designed to operate at predetermined intervals by releasing water & accumulated sludge periodically through a blow down tap near the bottom of the boiler

Blow-thru rotary valves are used for introducing fine free-flowing material into pneumatic conveying systems. The valves in this series have been designed for applications with certain non-abrasive materials, where the product required an assist to remove it from the vane pockets. Meets low headroom requirements. The valves itself becomes a direct component of the pneumatic system.   Valves for line sizes from 1 to 6 inches available. Fabricated or cast construction. Rotors are eight-vane, partially-filled type. Fabricated construction. Rotors with adjustable tips are available as an option. Inspection ports can be supplied and are recommended when adjustable tip rotors are used.   Rectangular blow-thru valves are used for systems requiring greater capacity without increasing the overall height. Standard models are available in double widths other sizes can be supplied on special order.   Features - Operation :- heavy-duty operation to 15 psig, and temperatures up to 250 f. Construction :- cast iron, fabricated carbon steel or stainless steel. Rotor :- 8 vanes, open ends, fabricated construction. Types : partially-filled, with or without adjustable tips . Oblique v-shaped cross section . Flange :- square or round inlets. Blow-thru line :- supplied with plain ends for compression couplings. Bearings :- sealed, heavy duty, ball bearings. Packing :- three ring shaft packing glands with square braided asbestos and teflon . Drive :- first quality, parallel-shaft gear motor, side mounted, 3 phase. 60 hertz, 230 – 460 volt, totally enclosed includes : sprockets, roller chain, and safety guard

blow down valve, Ac compressor valve, Breather Valve, Venturi valves

RVS Blow-Through Rotary Valves, Dust Collector, Electric Gear Motor Actuator