Blowers Dealers in Thane

• Country of Origin: India
• Type: Frp Blowers
• Material: FRP
• Driven Type: Electric
• Warranty: 1year
• Power Source: Electric Blower
• Blower Type: Centrifugal Blower

Centrifugal fans are robust, typically drum-shaped devices used to provide a high-pressure flow of air for cooling, ventilation, and other uses. Commonly known as blowers, centrifugal fans are noted for their reliability, adaptability and low noise output. Fans and blowers provide air for ventilation and industrial process requirements. Fans generate a pressure to move air (or gases) against a resistance caused by ducts, dampers, or other components in a fan system. The fan rotor receives energy from a rotating shaft and transmits it to the air.

• Brand Name: Tech US
• Body Material: MS
• Driven Type: Electric
• Blade Material: M.S | S.S
• Material : M.S | S.S
• Color: Blue
• Pressure: As Per Your Requirment
• Application: Air Ventilation, Dust Extraction
• Model Number: TUS-S221-44
• Certification: ISO 9001:2008 Certified
• Voltage: 240V
• Electric Current Type: DC
• Type: Centrifugal Blowers, Centrifugal Blower
• Weight: 10-30kg
• Phase: 3 Phase
• Warranty: 1year
• Country of Origin: India
• Fan Type: Backword Inclinded
• Codition: New
• Presssure: Low Pressure
• Blower Type: Centrifugal
• Air Flow: 850 To 2550 CMH
• Static Pressure: 2 To 8 Inch

We are reckoned as one of the renowned Manufacturers, Exporters and Suppliers of ID Blower. Our ID Blower has various types of high efficiency boiler induced draft fans. We can provide ID Blower in standard as well as customized designs. Our ID Blowers are precision-engineered and thus ensure high performance.

• Country of Origin: India
• Type: Power Blowers
• Application: Industrial
• Color: White, Silver
• Voltage: 220V, 415
• Automatic Grade: Manual
• Power: 1-3kw, 3-6kw
• Driven Type: Electric
• Warranty: 1year
• Name: Centrifugal Blower
• Usage: Industrial

• Impeller Diam.: 125 to 240 mm
• Air Flow: 175 to 1200 m3/hr
• Input Voltage: 110, 220, 440 V AC (50/60 Hz.)
• Power Input: 20 to 350 W

Anupam's Blowers normally use forward curved impellers made of galvanized steel, which are press fitted on the Rotor of External Rotor Motor, making the unit compact. Single inlet signifies that the Air is drawn from one side of the Blower only. The Rotor with impeller is dynamically Balanced in two planes, for vibration free running during its entire life. The assembly of Motor and Impeller is essentially mounted in a technically designed Housing for optimum performance. The External Rotor Motor is cooled with the air stream flowing over it. Cooling band heaters Cooling AC/DC Drives Air Balloons as an advertising media HVAC applications Applications with relatively small Air Volumes with high static pressure, and low noise levels  

• Phase: Three Phase
• Country of Origin: Made in India
• Application: Industrial
• Power Source: Electric
• Electric Current Type: AC
• Voltage: 415 V
• Material: MS
• Packaging Type: Wooden Box
• Mounting Type: Duct
• Brand: Airpro
• Noise: 75 dBa
• Frequency: 50/60 Hz
• Temperature: 40 Degree Celsius
• Fan Speed: 2880 rpm
• Air Volume: 120000 cfm

We have carved a niche in the market as the prime Manufacturer & Supplier of Industrial Blowers from Maharashtra, India. We fabricate Industrial Blowers using top-notch components and in compliance to set industrial parameters. Customers in both national and international markets can avail our range of Industrial Blowers at most rational rates.    More about Industrial Blowers : Industrial blowers are machines whose primary function is to provide a large flow of air or gas to various processes of many industries. This is achieved by rotating a number of blades, connected to a hub and shaft, and driven by a motor or turbine. A blower is another name for a fan that operates where the resistance to the flow is primarily on the downstream side of the fan. 

  Salient Features: High efficiency resulting in energy saving. Compact design - High performance density Equipped with ground screw being compact fans Impellers are made of - Aluminum

The pump consists of an impeller that spinswithin the housing compartment The housing contains a suction port & a pressure port. When the impeller goes past the suction port,air is drawn in & trapped between the impeller blades.The air is again pushed out through exhaust When the impeller crosses the exhaust port. This is a regenerative process which allows the blower to be used for suction as well as pressure application.

• Power: 1-1.5kW
• Material: Steel
• Voltage: 415V
• Brand Name: Super Tech
• Minimum Order Quantity: 1 starting price

• Country of Origin: Made in India
• Power: 0.5 HP
• Material: Stainless Steel
• Usage/Application: Pool Cleaning
• Frequency: 50 Hz
• Voltage: 240 V

Pp, ppfrp anti corrosive centrifugal exhaust blower are made for chemical industries, hotel industries and various pharmaceuticals industries from 0.5 hp to 50 h.p.

• Application: Sewage water, Water treatment, Chemical/ food stuff industries, Gas supply, Chemical/ process gas industry, Pneumatic transport
• Properties: Integrated pulsation cancellation, Minimal surface area required for installation, Easy accessibility, Discharge silencers, Quiet - low noise emission

• Brand Name: STIHL
• Model Name/Number: BGE 81
• Weight: 4.4 Kg
• Sound Pressure Level: 90 db (A)

Blower is a mechanical device for moving air or other gases. It has a fan wheel composed of a number of fan blades, or ribs, mounted around a hub. We, Provide Blowers in Composite and Dual Laminates, to meet the requirement of the client having numerous applications in Corrosive industries. These Blowers are casing to Impeller with Dynamically balanced shaft. The impellers are manufactured in various types like closed, semi open and open depending on the application. The drive type would be direct V-Belt driven. Blower are manufactured of any capacity, as per the requirement of the client.

AJANTHA range of Positive displacement blower is essentially constant speed machine that delivers relatively constant volume of air over a range of discharge pressures. In this blower air cannot be stored in a receiver nor throttled at the discharge but it must be used immediately. Standard blowers are supplied in vertical configuration, where one lobe is mounted on the other providing horizontal flow of air. However for special application horizontal configuration can also be offered on request. All blowers are normally supplied with standard accessories like suction / discharge silencer, base frame, filter, relief valve, pressure gauge, pulleys belts, belt guard & inter connecting pipe line. All blowers are tested as per B.S. 1571 part II for different parameters like capacity, pressure and B.H.P. The Lobes are dynamically balanced and all blowers are subjected to vibration test to ensure trouble free service. Positive displacement blowers have two timing gear driven "figure-8" shape lobed rotors that engage each other while rotating in opposite directions within a machined housing. Incoming air is trapped between lobes and discharged against relatively high pressure the rotors are separated at their closest point by small clearance space and never contact each other. A direct coupled motor or v-belt driven shaft drives the timing gears. v-belt drive preferred to permit speed changes, if required to meet system operating conditions. Capacity : 8-1760 cfm. Pressure : psig - 10 psig. Application Waste water treatment plantAqua culture plantCement industriesGlass industriesSugar industriesElectroplating plants.Pneumatic conveying systemChemical and fertilizer plantExtraction dryingMines and smeltersAs vacuum boostersSteel plants Features Low noiseMinimum maintenanceOil free air deliveryLow RPMHigh efficiencyr igid construction

• Warranty: 1 year
• Weight: 100 kgs to 350 kgs
• Air Volume: 500 CMH to 12000 CMH
• Temperature Range: Customized
• Brand: Super Tech
• Power Consumption: 9 kW- 60 kW

Twin lobe and trilobe blower are suitable for both pressure and vacuum blowing application. Capacities are available upto 30,000 m3Hr, and pressure range upto 1 bar g. Application areas include, ETP, Tank aeration, water treatment, pneumatic conveying, pick & place, waste water treatment. TECHNICAL SPECS: We need following information to select suitable blower Model: PROCESS NAME VACUUM BLOWER PRESSURE BLOWER INLET PRESSURE DISCHSRGE PRESSURE FLOW RATE ( IN M3HR OR CFM) HEIGHT OF THE PLACEFROM MSL RELATIVE HUMIDITY OF THE PLACE AMBIENT TEMPERATURE OF THE PLACE ELECTRICAL UTILITIES AVAILABLE

Unimax Twin Lobe Blowers have the following features incorporated for better performance and user friendly operations: Best in class raw material in C.I. and S.S. 100% oil free compression. Offered in horizontal as well as vertical flow. Rotors are dynamically balanced for vibration free operation Constant volume displacement. High volumetric efficiency. Lower operation cost. High precision timing gear for long life.

• Pressure: 20mm WG To 300mm WG
• Pressure: 20mm WG to 300mm WG
• Capacity: 300CFM to 30,000 CFM
• Drive: Direct/ v belt/ coupling type
• Suitable motor HP: 0.5 HP To 50 HP

We design, manufacture & install centrifugal blowers in PP and FRP, PVC & other corrosion resistant grades of FRP materials. The polypropylene moulded or FRP+polypropylene fabricated impellers are characteristically dynamically balanced. Our blowers are also designed and developed in conformation to the client's operational requirements.

We manufacture, export, and supply an extensive range of Turbine Blowers that is fabricated from superior quality raw materials. These Turbine Blowers consist of dynamically balanced impeller. The impellers installed in Turbine Blowers revolve in as stator - cum compression chamber and have very fine clearance in between. The suction and pressure openings on the outer periphery of the Turbine Blowers help in reducing impedance to the air flow thereby developing vacuum and pressure. Our Turbine Blowers do not require any lubrication. Having no friction, these Turbine Blowers are absolutely oil free. Compact in size, our Turbine Blowers come with silencer that ensures low noise. Attributes Of Turbine Blowers Sturdy compositionSmooth functioningEasy to operateConsistent performanceDurableReasonable rates

• Feature: High performance,Trouble free service,Efficient functionality,Easy operation,Low maintenance

• Warranty: 12 months
• Power Source: AC Three Phase
• Condition: New
• Color: Yellow
• Discharge Pressure (in bar): 1000 mbar
• Accessories: Piping, Receiver, Dryer, Controls, Filter
• Compressor Technology: Screw
• Compressor Brand: Kaeser
• Compressor Type: Air Compressor
• Horse Power: 15 HP
• Automation Grade: Automatic
• Brand: Kaeser
• Advantages: Plug and play set-up saves time and money. Safe and reliable conveying, optimized for your needs. Compact footprint thanks to intelligent enclosure design.

The unit is provided with a hot air blower with Temperature Controller. 30", 36", 42" and 48" coating machines have variable speed drive and hot air blowing system is built with the machine.60" and 72" coating machines has dual speed with step pulley without hot air blowing system. Suitable hot air blowing system can be supplied separately on demand.     Special Features of Vats & Vessels Coating Machine Coating machine is available with S.S. Pan of 12", 18", 24", 30", 36", 42", 48", 60" & 72" sizes. Product contact parts are in stainless steel 304 / 316, all SS Parts Polished to suitable finished required of pharmaceutical equipment The gear box, motor, and hot air blower are enclosed in a mild steel enclosure or stainless steel in case of GMP models Coating Pan is provided with interlocked electrical circuit so that the heaters can be operated only after blowers are made on to avoid burning of Heaters. Mounted on dynamounts to avoid foundations Unit with FLP motors and FLP push button station Easy cleaning

• Rated Power: 0.5 HP
• Model: ME-45
• Capacity: 85 / 50 M3/Hr. Cfm
• Max VAC Mbar: 75
• Max Pressure: 85 Mbar