Construction Machine Dealers in Bhayandar, Thane

Concrete Mixer for Consruction and Paver Tile Block Industry   Hassle-free functioning Less maintenance is required.   It is easy to set up.

• Brand Name: Ever Shine
• Features: Durability, High Performance, Easily Installable
• Usage/Application: Industrial
• Material: Mild Steel
• Capacity: 800-1000 Kg
• Power Source: Electric
• Phase: 1 Phase
• Automation Grade: Semi-Automatic
• Frequency: 50 Hz
• Storage Material: Ceramic

Al 10.0mm to 2.5mm Cu 8.0mm to 2.5mm MS 5.5mm to 2.5mm

• Brand Name: Bhalaria
• Stainless Steel: Indian Origin

The professional turner solid has an elegant design that can compliment any decor.

• Shaft Dia.: 25 to 180mm
• Pressure: – 0.1
• Temperature: – 20
• Linear Speed: 2 m/s or less
• Pack Type: Box

Features Single end    Unbalanced & balanced Easy installation. Wet seal without bearing arrangement.   Advantage   Seal are factory assembled & dynamically tasted cartridge units for steel, glass lined, ss mixers, agitators & vessels. These are used with non-pressurized barrier fluid preferably clean soft water because of its good heat transfer qualities. Fluids like oil, hydrocarbon, solvents etc. can also be used as buffer fluid by considering the corrosion resistance of wetted parts & compatibility with main media to be sealed. These seals are supplied with cooling water jacket, which ensure cool running of seals.   Operating Range Pressure: – 0.1 ~ 0.6 MPa (when the pressure is bigger than 0.6 MPa, the pressure balancing device is needed and its connection size can be customized) Temperature: – 20 ~ 150 ºC (cooling tank is required if the temperature is higher than 150 ºC and the installation height should be 100 mm higher than normal)   Materials Rotary Ring Face: SiC/Carbon Stationary Ring Face: CERAMIC/SiC Elastomers: /PTFE/FFKM Springs: /SS316/HC-276 Metal Parts: SS304/SS316/SS316   Recommended applications Corrosive Chemicals  General Chemicals  Light Hydro Carbons  Mixers & Agitators.

• Place of Origin: India

Material Specification for 10 Ton/day 200 Block Each 50 Kg Section High Side Equipments 1 Refrigeration Compressor Smc 4-100 Make with Standard Accessories Recondition Make Compressor. 1 No 2 Crompton/kirloskar Make Tefc. 1450 Rpm 40 Hp 3 Phase 440 Volt 1 No 3 Shell & Tubetype Condensor 1 No 4 Drive Accessories & Compressor Oil 30 Ltr 5 Slide Rails 1 Set 6 Frp Cooling Tower 1 No. 7 Refrigerant Fittings & Valves 1 Lot 8 Suitable Condensor Pump 1no. 9 Galvanised/pvc Pipes & Fittings 1 Lot 10 First Charge of Refrigerant Fre-on Gas 1lot Section  Low Side Equipments 1 1 Lot of 5 Mm Thick Sheet to Make Tank At Site to Hold Approximately 10 Ton Ice Cans Each Having a Capacity of 50 Kg. 200 Nos 2 Brine Agitator with Motor 1 No 3 Shell & Tube Type Chiller 1 No 4 Hand Hoist 1 No 5 Trolly Complete with Angle/square Bar Type Rails 1set 6 Can Dump Complete with Stands 1 Set 7 10 Ton Ice Cans Made from 16swg.(1.5 to 1.6mm)g.i Sheet Each Having Capacity of 50 Kg 200 No. 8 65 Mm Thickness Thermocol to Insulate Ice Tank ,In to 2 Layers from Base & Side (total Thickness of Insulation Will Be 120 Mm) 1 Lot 9 Fittings 1 Lot 10 Drums of Bitumin 1 Lot 11 Brine Meter 1 No. 12 Dial Type Thermometer 1 No 13 Suction Line Insulation 1 Lot 14 Bolts & Nuts for Frame Works 1 Lot

Double Toggle Jaw Crusher, Pelletizer, batch ball mills, Disc Grinder

Stone Chips, Sand, TMT Bar

jar mill, concentrating table, Mineral Jig, harz jig, Granulator

Cement Plant

jaw crushers used in aluminum, coating blanket, rubber roller for printing

hand tools, industrial bolt, two wheelers spars parts

Centrifuge Machine, Pharma Peeler Centrifuge, BOTTOM DISCHARGE