Crescent Combustion Systems Ghodbunder Road, Thane, Maharashtra

Features 15 to 250 kw turndown range 10:1 fuel: natural gaspropanelpg preheated air upto 700ºc electrodes can be easily replaced flame tube:silicon carbide applications heat treatment furnace tunnel furnace reheating furnace strip line ceramic furnace.

Features 2.3 to 5.8 kw100mm ribbon length turndown range 3:1 mixture pressure: 0.5-1.6 mbar fuel:natural gaslpgpropane electrodes can be easily replaced three flames burner on request applications baking oven for foodstuff air heating in oven vial sterilizing machine industrial packing machine braze welding machine.

Features 30 to 300 kw turndown range 10:1 fuel: natural gaspropanelpgproducer gas air & gas pressure at the burner 45 mbar electrodes can be easily replaced. operation with preheated air upto 450ºc separated gas and air inlet, no flashback applications heat treatment furnace continuous galvanizing annealing furnace normalizing and hardening furnace nitriding furnace carbonitriding furnace carburizing furnace

Features 1 to 525 kW Can burn any standard fuel gas at mixture pressures ranging from 2.54 mm WC to 1524 mm WC, easily lighted at stated mixture pressures. Long annular orifice reduces back firing even at lower mixture pressures. Shorter flame length & higher heat release (On Standard Blocks) Pilot tip edge is screwed in the body to ensure permanent and correct location of pilot flame. Integral flanged units are available for pressurized furnaces. Applications Wire Annealing furnace Wire Patenting furnace Copper Launder Heating Heat Treatment furnace

Features 5 to 15 kW Mixture press : 2 to 6 mbar AirGas pressure : 30 70 mbar Fuel : Natural GasLPGPropane Size : ½”, ¾” & 1” Excellent flame stability Applications Pilot burner Aluminium Billet Reheating furnace Pouring Spout Heating

Features 100 to 435 kW Turndown range 30:1 to 50:1 Fuel : Natural GasLPGPropane High excess air Separated gas and air inlet, no flashback On ratio firing Applications Air heating Colour coating oven Foodstuff oven Textile and dyeing purpose Stenter Steam generator

Features 30 to 600 kW Turndown range 10:1 Fuel : Natural GasPropaneLPG Excellent flame stability with excess air, excess fuel and ON-ratio firing, over 400% excess air. Separated gas and air inlet, no flashback. Applications Air heater Steam generator Drier Heat treatment furnace for low temperature Homogenizing furnace Textile drying Low temperature furnace

Features 10 to 3750 kW. Turndown range 10:1 Fuel : Natural GasPropaneLPGCoke OvenBFG Producer Gas. Air & gas pressure at the burner - 44 mbar Operation with Preheated air upto 450°C Burner's refractory block operating temperature up to 1750°C Separated gas and air inlet, no flashback Applications Reheating furnace Continuous galvanisingAnnealing furnace Melting furnace Forging furnace Heat Treatment furnace High Temperature furnace Laddle Heating

Features Compact sizes (18” to 34”) Mixer body: Brass Fuel: Natural GasPropaneLPG Applications Pilot burner Low capacity premix burner

Features 30 to 600 kW Turndown range 10:1 Preheated Air up to 400 º C Fuel: Natural GasPropaneLPG Excess Air Over 400%. Separated gas and air inlet, no flashback. Optional: Refractory burner block available Applications Heat Treatment furnace Forging furnace Ceramic kiln Stress relieving Reheating Turndish heatin

High Blast Torches Features 12 to 850 kW Fuel : Natural GasPropaneLPGCoke Oven Air Pressure required : 1.4 bar to 8.4 bar Min. gas pressures : Coke-oven gas- 13 mbar Min. gas pressures : Natural gas-7.6 mbar Min. gas pressures : LPGPropaneButane-2.5 mbar Applications Ladle & Crucible Melting furnace Launder Heating Cupola firing Core drying Pouring Spout Heating

Features 16 to 1500 kW Turndown range 10:1 Fuel: Natural GasPropaneLPGCoke OvenBF Producer Gas Max. Air pressure at the burner 70.4 mbar Operation with Preheated air up to 450°C Burner's refractory block operating temperature up to 1750°C Low Nox Levels Applications Annealing furnace Zinc Melting Pot furnace Cone and Pit furnace Reheating furnace Aluminium Melting furnace

Excess Air Nozzle Mix Burner Features 16 to 1700 kW. Turndown range 10:1 Fuel : Natural Gas PropaneLPGCoke OvenBFG Air pressure at the burner - 25 mbar Gas pressure at the burner - 10 mbar Operation with Preheated air upto 450°C Burner's refractory block operating temperature upto 1750°C Separated gas and air inlet, no flashback Over 800% excess air Applications Heat treatment furnace Low Temperature furnace Annealing furnace Stress Relieving furnace Hot Air Generator Laddle Heating

Features Gas-90 to 1450 kW, Oil-100 to 1650 kW Gas turndown range 10:1 Oil turndown range 6:1 Air & Gas pressure at the burner 70100 mbar Fuel-Natural GasPropaneLPGLDOFOKerosene Operation with preheated air upto 450ºC Burner's refractory block operating temperature upto 1750 ºC Excellent flame stability instant lighting with either fuel Separated gas and air inlet, no flashback Applications Heat Treat furnace Annealing furnace Forging furnace Ceramic Baking furnace Drier Incinerator Melting furnace Hot Air Generator