Drilling Equipment Dealers in Thane

Impact Square Drive Adaptors are used as a convertor to permit use of sockets with impact wrenches of different square drive sizes i.e. higher or lower. These are available in 1/4" (6.3 mm), 3/8" (9.5mm), 1/2" (12.7mm), 3/4" (19mm), 1" (25.4mm), 1.1/2" (38.1mm) and 2.1/2" (63.5) square drives of adjacent reducing / increasing combinations of male and female drives. These are of two designs - Square Drive Adaptor with two cross holes for conventional impact wrenches and Square Drive Adaptor with groove for locking ring and pin arrangements for impact wrenches with cross hole on male square drive. It may be noted that torque capacity of these Adaptors is limited to torque capacity of smaller square drive sizes.

• Certification: CE Certified
• Weight: 100-500kg, 1000-2000kg
• Voltage: 220V, 380V, 440V
• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Electric

• FEATURES: One size of tool is suitable for use on multiple tube thickness by interchanging pilot.

We manufacture Tools such as Tube End-Facers, Tube Sheet Grooving Tools, Serrating Tools, Tube Guide, Tube sheet Reamer, Tube Sheet Hole Brush, Belling Tools, Tube Facing Machines, Tube Beveling Machines & Tube Leak Detectors etc.

Owing to our cutting edge technology, we export a precision engineered range of Wax Facer Special Purpose Machine. These are fabricated using best grades of raw material and offers efficient performance. Meticulously designed these are durable, sturdy, dimensionally accurate and corrosion resistant.  Our Wax Facer Special Purpose Machine is in high demand in the global market and is stringently checked before the final delivery.

• Specialities: Rust Proof, Long Life
• Country of Origin: Made In India
• Controller: SC04 PC-based controller
• Panel size: 350 x 400 mm
• Spindle Speed: 800 watt, 24000 rpm 
• Machine Type: Automatic

We are offering drilling tools we hold the expertise in manufacturing a wide range of drilling tools. Our ranges of products are manufactured using high-grade raw materials. Our drilling tools are featured with sharp drilling points, sturdy drill bits and extended life span. Drilling, plays a vital role in making holes efficiently on various materials like metal, wood, plastics, etc in all kinds of manufacturing industries all over the world. Our product is widely used for its competence and cost-effectiveness.

This universal drilling machine is a square column type drilling machine. It is mainly used for counter-sinking, spot-facing, drilling, tapping, boring, reaming etc.

Automatic Drilling Machine available with us is manufactured will all the components required for the convenience of the customers. The Automatic Drilling Machine developed by us provides the accuracy in drilling & chamfering process. Our Automatic Drilling Machine also improves feed rate in the machinery.

• Features: Light weight,Application specific design,Flawlessly finished

SDS Drill Bit Being the most valued organization guided by experienced and knowledgeable professionals, we provide an enormous assortment of SDS Drill Bit. Frequently utilized for drilling applications in various industrial areas, these products are designed using high grade material. Our offered range is identified in the market for its features. This assortment can be purchased by our clients in different specifications. Features: Light weight Application specific design Flawlessly finished Masonry Drill Our organization has successfully expanded its business in market owing to the offered elevated quality array of Masonry Drill Bit that finds extensive application for drilling bricks, plaster, stone & concrete. The offered drill bit is manufactured utilizing superior quality raw material and sophisticated technology. Apart from this, a team of quality experts conducts a series of tests on this drill bit to seek out any possible flaw in it. Features: Non-corrosive No need to sharp the tips Hardened & tempered

• Material: Mild Steel
• Length: 5 Feet
• Type: Straight Shank
• Size: 8-10 mm
• Usage/Application: Use in borewell for drilling

• Brand Name: POWERTECH
• Application: FOR DRILLING
• Frequency: 50HZ
• Supply Ability: 1000 Unit/Units per Month
• Rated Input Power: 560WATT
• Drill Type: Magnetic Drill
• Port: MUBAI
• Packaging Details: PACKED AND SEAL IN BOX
• Max. Drilling Diameter: 31MM
• Rated Torque: 01HP

• Weight: 1.9 Kg
• Brand: Bosch
• Drilling Diameter: 22 mm
• Voltage: 220V
• Model Number: PSB 650 RE
• Product Dimensions: 38 x 34 x 11 cm

• Features: Tube End Facer is suitable for quick facing of projecting tube ends in heat exchanger & condenser,One Size of tool is suitable for multiple tube thickness., This tool need to be drive by standard elec
• Application/Usage: Industrial
• Heat Exchanger Type: Tube Heat Exchanger
• Tool Bit Material: Carbon Steel, Stainless Steel
• Tube Outer Diamter: 3/8 - 2.1/2 inch
• Tool Thickness: 0.072 - 0.049 inch
• Jacob Chuck Size: 1/2 inch

With Vacuum Degasser & Mixer low pressure gradient module, you can take many advantages for up to 4 solvent mixing and degassing Configure with Gradient pump Easy mixing and in-line vacuum degassing

• Place of Origin: Made in India
• Material: Steel
• Machine Weight: 700kg
• Machine Type: Automatic
• Power Consumption: For stepper 3.5kw and for ac servo 5.5kw

• Max Drilling Depth: 1500 mm
• Floor Area: 10500*6700 mm
• Machine Weight: 20 Tons
• Center Height Above Floor: 1105 mm
• Lubrication Tank Capacity: 5 Liters
• Machine Paint: Apple Green
• Solid Drilling range: 65 mm - 135 mm
• Counter Boring: Up to 180 mm

• sizes: 1/4",3/8",1/2",3/4",1",1 1/2" and 2 1/2"

Square Drive Adaptors are used as a converter to permit use of sockets with impact wrench of different drive sizes i.e. higher or lower. These are available in 14", 38", 12", 34", 1", 1 12" and 2 12" square drives of adjacent reducing increasing combinations of male and female drives. These are of two designs : Square Drive Adaptor with, cross holes for conventional impact wrench. Square Drive Adaptor with groove for locking ring and pin for impact wrenches with cross hole in male square drive.

• Frequency: 50 Hz
• Weight: 18.8 Kg
• Drilling Diameter: 25 mm
• Twist Drill Capacity: 23 Kg
• Model Name/Number: Magnetic Core Drill
• Power Consumption: 1480 Watt
• No Load Speed: 680 rpm

Depending on the steel grades to be produced, various after treatment methods and process combinations can now-a-days be applied to modern steel making shops. For some grades of steel vacuum treatment has to be given to the steel to achieve strict quality parameters. Various processes have been developed using vacuum. VACUUM DEGASSING PROCESSES : Vacuum degassing is practiced in the steel industry for several purposes. They are : - to remove hydrogen to improve cleanliness by removing part of the oxygen to produce steel of low carbon content ( < 0.03%) to produce steels to close chemical composition ranges (including deoxidizers), and to control pouring temperatures, especially for continuous casting operations.

• Type: Multi Spindle Drilling Machine
• Certification: ISO 9001:2008
• Color: Grey
• Condition: New
• Driven Type: Electric, Hydraulic
• Warranty: 2years
• Weight: 0-200Kg
• Automatic Grade: Automatic, Manual
• Power: 10-12kw

• Model: XYBVN50
• Max Weight of Tube Sheet: 12000 kg
• Drilling Stroke: 500 mm
• Drilling Size: 19 - 50 mm
• Table Size: 2000X2000 mm
• Spindle Power Drilling: 22 kW
• Y Axis: 1500/2000 mm
• No of Spindles: 1 - 2

• Tube Thk. bwg: 16-22
• Stainless Steel Tubes Model No.: TEF-376 SS

Tube End Facer TEF Tools bits coated with Titanium Nitride to give 3 times the life of convertional tool bits.Ideal for quick facing of projecting tube ends in heat exchange condenser and boilers.One size of tool is suitable for use on multiple tube thicknesses by interchanging pilot.

FEATURES: • Tool bits are coated with Titanium Nitride to give 3 times the life of conventional tool bits. • Ideal for quick facing of projecting tube ends in heat exchanger, condensers & boilers. • One size of tool is suitable for use on multiple tube thickness by interchanging pilot. (TEF- 375 is the exception with the tool suitable for one tube ID only.) • Each tool is supplied with a set of multiple pilots to cover tube thickness. • Tube end facers for MM sizes of tubes also available. Please enquire.

• Model Name/Number: STHR202
• Brand: Stanley
• Impact Rate: 0-3900
• Power (W): 620
• Tool Holder: SDS-Plus
• Max Impact Energy (J): 1,34
• Impact Energy (J)EPTA: 1,2
• No Load Speed (rpm): 0-1250
• Forward/ Reverse: Yes
• Max. Drilling Capacity (wood) : 25(mm)
• Max. Drilling Capacity (metal): 13 (mm)
• Max. Drilling Capacity (Concrete): 20 (mm)
• Length: 330 (mm)
• Height: 210 (mm)
• Unit Weight: 2,8 (kg)

• Country of Origin: Made in India
• Material: Mild Steel
• Number Of Shaft: 1
• Model Name/Number: DHD-1000/2000
• Usage/Application: Gun Driiling
• Automation Grade: Automatic
• Hole Diameter: 25-50 mm
• Power Consumption: 20 Kw
• Capacity: 5 mm To 35 mm

• Type: Magnetic Drilling Machine
• Certification: CE Certified, ISO 9001:2008
• Color: Black, Brown, Grey
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual
• Warrenty: 1 Year, 2 Years, 5 Years

• Automatic Grade: Automatic
• Coolant Tank Capacity Max: 7500 ltr
• Tool Head Spindle Speed: 100 - 800 RPM
• Drilling Depth: 1500 - 10000 mm
• Solid Drilling Range: 30 - 125 mm
• Power Consumption: 50 kW
• Material: Cast Iron
• Model Name/Number: SBM125

One of the suppliers of industrial products, providing various types of products such as drilling tools.

High speed production tools.Titanium Nitride coated tool bit can be reversed and used. Doubles tool bit life.

• Automatic Grade: Manual
• Driven Type: Electric