Dryers Dealers in Ghodbunder Road, Thane

• FEATURES: Equipped with different designs of agitators depending on the material to be dried., Unique quick opening discharge valve permits direct packing of dry product into bags or drums.

The drying in a rotary vacuum dryer is a batch operation under vacuum. It is possible to dry heat sensitive materials at well below boiling points of water and solvents. Drying time depends on material being dried, amount of solvent or water to be removed, desired final moisture content, permissible jacket temperature etc. The dryer is available in sizes ranging from 100 liters to 20,000 liters gross volume. The volume of wet material loaded into the dryer is usually restricted to 40-45% of gross volume.

Introduction Rotary Vacuum DryersRotary vacuum dryers offer clean, simple and effective method of drying wet cake, powder and even slurry. Labor and energy costs are minimal compared to tray dryers and product losses during handling are also negligible. Additionally valuable organic solvents can be conveniently condensed and recovered. Working Principle The drying in a rotary vacuum dryer is a batch operation under vacuum. It is possible to dry heat sensitive materials at well below boiling points of water and solvents. Drying time depends on material being dried, amount of solvent or water to be removed, desired final moisture content, permissible jacket temperature etc. The dryer is available in sizes ranging from 100 liters to 20,000 liters gross volume. The volume of wet material loaded into the dryer is usually restricted to 40-45% of gross volume.

Rostary vacuum dryer offer clean, simple and effective method of drying wet cake, powder and even slurry. Labor and energy costs are minimal compared to tray dryers and product losses during handling are also negligible. Additionally valuable organic solvents can be conveniently condensed and recovered. Working principle the drying in a rotary vacuum dryer is a batch operation under vacuum. It is possible to dry heat sensitive materials at well below boiling points of water and solvents. Drying time depends on material being dried, amount of solvent or water to be removed, desired final moisture content, permissible jacket temperature etc. The dryer is available in sizes ranging from 100 liters to 20,000 liters gross volume. The volume of wet material loaded into the dryer is usually restricted to 40-45% of gross volume.

• Capacity: >100ltrs upto 15KL
• Motor Power: >5Hp
• Max Temperature: 300 Deg C
• Voltage: 415 V
• Automation Grade: Automatic
• Material: Stainless Steel

• Type: Fluidized
• Certification: CE Certified
• Weight: 100-500kg
• Voltage: 380V
• Power: 2-4kw
• Application: Industrial Use

We have rich year of experience in designing Fluidized bed dryer. We are excelled in manufacturing of SS & MS make along with complete automation which reduces the chances of over pressure and also provide complete reaction details. APPLICATION :-- Pharmaceutical / Chemical / Bio tech industries : To reduce moisture content of fine powder and granules. Titanium Dioxide Production - Coal Combustion & Gasification Nuclear Energy (Uranium Processing, Nuclear fuel Fabrication, reprocessing of fuel & water disposal) Methanol to gasoline and olefin processes

• Brand Name: Devdry
• Dehumidifier: Desiccant Rotor

Having Dry Air Desiccant System can be a fantastic tool to allow you to dry and control humidity in an area. Units such as the Devatech portable desiccant dehumidifier are fantastic for jobs that require and efficiently powered system that can run for hours on end. These systems are also perfect for more confined areas such as attics and crawl spaces. Regardless of the level of humidity in the air, these devices can quickly and efficiently remove excess amounts of water vapor at an extremely rapid pace. The Category of our Dry Air Desiccant Dehumidifiers Sysem include:- Dehumidifier Industrial dehumidifiers We also Manufacture Air Handling Unit with inbuilt Dehumidifier HEW Wheel

We are using the latest technology for paper drying we use only three big rolls heated by electricity, steam or thermic oil. In this technology total heat transfer to roller surface and pass to wet paper directly. The surface contact area is 90-95% of roller surface area so we are using maximum heat without heating air and losing energy. We are using motorised squeezing roll assembly with pneumatic cylinder to give high pressure to rubber roll to remove maximum water from resin so our system is 50% higher energy saving then others. Due to only three rolls at low height it’s very easy to pass paper and the production capacity is 50% higher then others. The deep roll is mounted on body inside stainless steel tray better than putting on the floor without proper alignment as others.

We are offering high gloss drier. the company is chiefly engaged in the importing and supplying of high gloss drier all across the country. Our high gloss drier is high in quality and provides excellent results. This high gloss drier is available with us at the most competitive prices.

Speed Queen dryers do more than dry your laundry—they dry it to perfection each and every load for the life of the machine. Through special drying cycles, a flawless Axial Airflow pattern and advanced moisture sensing, you can eliminate excessive drying and save money on your utility bill. If you want durability, innovation and perfectly dried laundry the first time, you need a Speed Queen dryer.

• Frequency: 50 Hz
• Phase: Single Phase
• Weight: 61 Kg
• Voltage: 230 V
• Features: Easy installation The plug-and-play concept with a single electrical connection and self-regulating controls facilitates installation
• Model No: FX8
• Pressure Drop: 0.24 bar, 3.45 psi
• Inlet Capacity: 69 l/s, 146 cfm
• Maximum Working Pressure: 13 bar, 189 psi
• Brand: Atlas Copco

Compressed air coming from the Receiver containing solid, liquid & vapour contaminants enters the Dryer through the Pre-filter (where solid & liquid contaminants are removed). It then passes through Oil Removal Filter and enters into Adsorption Tower A1 through a 3-way valve (CV-1) where it gets dried and then passes out of the Dryer through the After-filter. A part of this dry air passes through Tower A2 through the Purge Control Valve, where it picks up the moisture from the adsorbent thereby regenerating it and making it ready for the adsorption cycle. The purge air exhausts out of the Dryer through Purge Exhaust Valve (CV-2) of Tower A2.

We are the main supplier of this product.

We are offering fluid bed dryer. Capacities:- 5-10kg; 30kg; 60kg; 120kg; 150kg; 250kg; 300kg; 400kg; 500kg. And other s up to 800kg.

rotary vacuum dryers, Vertical Plate Filter, Oscillating Granulator Machine

Laminar Air Flow Bench, Modular Clean Room Panel, Air Shower

Zero Hold Up Sparkler Filter Press, high shear mixer granulator

silk screen ink, offset inks

Oxygen Gas Analyzer, Air Receiver, Drain Valve, PSA Gas Generator

Tray Dryers, Conveyor Oven, Furnaces

Frp Cooling Towers

Pharmaceutical Machinery, Nutsche Filter, Reactors, vacuum systems