Dushrath Dombivli, Thane, Maharashtra

to cut samples having thickness up to 4mm. Specification : Operation : Manual. Cross travel : 4 inch. Paint : Powder coated.

Direct display of results and printout through microcontroller such as Peak load, Break load, Elongation at peak load, Elongation at break load, Tensile strength at peak load, Tensile strength at break load, % elongation at peak load, % elongation at break load could be viewed on the micro controller and printout could be obtained by directly attaching a dot matrix printer to the equipment

Tensile and Elongation as per ASTM – D638 and ASTM – D882 Direct display of results and printout through microcontroller such as Peak load, Break load, Elongation at peak load, Elongation at break load, Tensile strength at peak load, Tensile strength at break load, % elongation at peak load, % elongation at break load could be viewed on the micro controller and printout could be obtained by directly attaching a dot matrix printer to the equipment Graphic display and printout through PC with some additional results such Young’s modulus, Yield load, Yield stress and Load Vs Elongation graph. With merging facility one can merge no’s of files to get results of Average value and Standard deviation value No’s of load cell inputs – 01 No’s. Cross Travel – 1000 mm. PC connections – Rs-232 serial interface port. (USB port optional). Supply – 230 VAC/ 50 Hz. Paint – Powder coated.

To seals the specimen under specified temperature, pressure and dwell time, to test the heat seal strength of laminated films. Film heat seal tester confirms to standard of ASTM F2029. As per ASTM, ISO & IS standards Mechanical-electrical integration of control system. Multifold heat sealing jaws with different areas according to customer's requirement, and easy to change. Temperature controlling: PID. Resolution – 0.1 ºC. Dwell Time: 0.01Secs to 99.99 Secs. Supply – 230 VAC ± 10 VAC/ 50 Hz. Paint – Powder coated.

As per ASTM, ISO & IS standards Qualitest, a leading manufacturer and supplier of testing equipment for rubber and plastics, offers a full range of certified Specimen cutting dies and cutters as well as Clicker presses for polymer laboratories. This high quality range of specimen cutting dies and sample cutter are made exactly according to the specific ASTM, DIN, ISO, or JIS standards and are highly accurate for perfect preparation of your test specimens. All of these specimen cutting dies come in a padded carrying case and are supplied with full certification. Qualitest also offers re-sharpening service for these specimen dies and maintain highest quality of production and standards.

As per ASTM, ISO & IS standards Salt Water Spray Chamber is for testing the rust resistance grade of surface treatment of Electro-Plating, Paint Coating and Anodizing. Salt water spray tester is used for testing rust-proof treatment of material, such as metal surface that after painting, coating, electro-plating, anodizing, films of organic and non-organic...etc. It's a corrosion and Rust-Resistant test.. This test equipment is for checking the corrosion resistant of products (specimen) under long time corrosion after treatment like anodize, rustproof oil, chemical, etc

Load measurement range -0.2 - 100% FS Load Indicating accuracy - within +- 1% Displacement indicating accuracy - Within +- 1% Displacement resolution - 0.04 thou (1um) Pipe ID measurement range accuracy - 0.0004" (0.01mm) Deflection measuring range - 0 - 100%FS Testing speeding - 0.02-7.9in./min (0.5 - 200mm/min) Error of Speed -within +- 1% Testing method - Ring stiffness ISO 9969 and eq. Operating method - PC control Max. compressing space- 118" (3000mm) Dimension DxWxH - 26"(650mm) × 54" (1360mm) x 170" (4300mm)

Specification : emperature controller: Micro processor based PID controller with temperature range from ambient to 400ºC, resolution of 0.1ºC and accuracy of + 0.1ºC. Timer : Digital presettable with a range up to 59 minutes, 59 seconds. Sample cutting: Auto [Motorized] Paint : Powder coated.    

Power : 230 Volts, 50 Hz, single phase.

Computerised version. Temperature control system – Microcontroller based PID controller. Heating Rate – Selectable. Gas switching – Automatic. Supply – 230 VAC/ 50 Hz Power – 1 KW. Paint – Powder coated.

As per IS 4985 ; Is 12235 part -3; ISO and ASTM Easy to operate and easy to check the calibration. Direct display of opacity. Sample holder - Easy to handle Paint – Powder coated.

As per ASTM – D1709 and IS 2508. Smoke ventilation provided at backside. Temperature cross checking provision provided Temperature Range – Ambient to 1100 °C. Temperature control system – Microcontroller based PID controller. Supply – 230 VAC/ 50 Hz. Paint – Powder coated.

MFR/MVR TESTER - Model: AE-MFI-B-FA Temperature Range: Ambient to 400 °C. Resolution: 0.1°C. Automatic result of MFR, MVR & Melt Density. Auto weight loading facility. Accessories: Standard Accessories. Paint: Powder coated. Supply: 230 VAC/ 50 Hz.

As per ASTM D1238 - "A" & “B” Method and ISO-1133.MELT FLOW INDEX TESTER - Model: AE-MFI-A-MC Temperature Range: Ambient to 400 °C. Resolution: 0.1°C. Timer Range: 999 Seconds. Resolution: 1 Second. Sample Cutting: Manually. Accessories: Standard Accessories. Paint: Powder coated. Supply: 230 VAC/ 50 Hz.

No. of load cell : Two. Horizontal day light : 450 mm*. Paint : Powder coated. Direct display and printout through embedded controller: Peak load, Break load, Elongation at peak load, Elongation at break load, Tensile strength at peak load, Tensile strength at break load, % elongation at peak load, % elongation at break load, Young’s modulus, Yield load, Yield stress, Flexural stress, Flexural modulus, Compression strength and Load Vs Elongation graph could be obtained in different user selectable unit and format. Similarly average value and standard deviation could be obtained by merging different tests. Material Testing Machine

COMPUTERISED HYDROSTATIC PRESSURE TESTING PANEL (Model: AE-HPT-FC-8) Advance Hydrostatic Pressure Testing Machine are available with advance technology as per different application for the test of internal pressure of R-PVC, C-PVC, U-PVC, MDPE, HDPE, LLDPE, PP-R pipes, Fittings, Valves etc. as per ASTM, BIS, ISO, DIN, IS and other equivalent standards.TECHNICAL SPECIFICATIONS No’s of Stations: 8. (other optional) Pressure Range: 0 – 100 bars. ( others optional) Resolution: 0.1 Bar or 0.1 Kg/cm² Accuracy: 0.25% of sp. Units: Bar, Kg/cm² selectable Pressure + Time direct display on individual controller. Graphical display and report prints through software. Timer Range: 9999.9 hrs. Supply – 230 VAC/ 50 Hz. Paint – Powder coated.

Specification : Capacity : 5 tonnes*. Operation : Manual. Horizontal day light : 12 inch. Cross travel : 4 inch. Paint : Powder coated.

    COMPUTERISED HYDROSTATIC PRESSURE TESTING PANEL (Model: AE-HPT-FC-8) Advance Hydrostatic Pressure Testing Machine are available with advance technology as per different application for the test of internal pressure of R-PVC, C-PVC, U-PVC, MDPE, HDPE, LLDPE, PP-R pipes, Fittings, Valves etc. as per ASTM, BIS, ISO, DIN, IS and other equivalent standards.TECHNICAL SPECIFICATIONS No’s of Stations: 8. (other optional) Pressure Range: 0 – 100 bars. ( others optional) Resolution: 0.1 Bar or 0.1 Kg/cm² Units: Bar, Kg/cm² selectable Pressure + Time direct display on individual controller. Graphical display and report prints through software. Supply – 230 VAC/ 50 Hz. Paint – Powder coated.

HOT AIR OVEN – Model: AE-HAO-B As per IS, ISO standards Working Size – 1200mm X 1200mm X 1200mm Material of construction – Outer: MS Inner: SS Temperature Range – Ambient to 150 °C. Temperature control system – Microprocessor based PID controller + Thyristor control. Supply – 230 VAC/ 50 Hz Paint – Powder coated.

Hot Air Oven is laboratory purpose oven used for multiple test application for plastics like shrinkage, reversion, moisture content and lateral E.S.C.R. test at different temperatures. HOT AIR OVEN – Model: AE-HAO-S Material of construction – M.S.( others optional) Temperature Range – Ambient to 250 °C. (others optional) Temperature control system – Microprocessor based PID controller. Timer: Programmable with Memory Backup Supply – 230 VAC/ 50 Hz. Paint – Powder coated.

MOC: Inner - S.S. Outer - M.S. All data entry via software. Average & Standard Deviation. Sample loading: Station easily raised and lowered manually and locked in position avoiding messy oil spills. Deflection Penetration: Measured via transducers accurate to 0.00-10.00 mm.

Station Nos – 6(others optional). Supply – 230 VAC/ 50 Hz. Paint – Powder coated. STANDARAD ACCESSORIES Sample holder, Test tube & rubber corks 6 nos. each. Cutting die, Nicking jig, Bending tool, Sample transferring tool and aluminum foil 1 no each.

Specification:- Indicator : Microprocessor based digital load indicator with range up to 9.999 kg, resolution of 1 gram, accuracy of + 1 gram and memory facility of peak load Templates : Three number of S.S templates for sample cutting. Paint : Powder coated.

to check the adhesive strength between two samples. Specification:   Load capacity : Up to 5 kg.* No. of load cell: One. Cross Travel : Up to 250 mm* Direct display : Peak load. Paint : Powder coated. Power : 230 Volts, 50 Hz, single phase.

To prepare the samples for Izod/ Charpy test as per ASTM - D256. Digital display having the resolution of 0.01mm. Supply – 230 VAC ± 10 VAC/ 50 Hz.