Electric Hoists Dealers in Thane

ELEPHANT BRAND" WIRE ROPE HOISTS ARE SUPERB COMBINATION OF MATERIAL AND LATEST TECHNOLOGY...SPECIAL FEATURES: HIGH EFFICIENCY:1) These are designed for high speed operation to increase productivity.2) Precision workmanship of all components minimises losses and increases efficiency. SHORT OPERATION:1) Smooth operation is ensured by gears having precision machine cut teeth subjected to heat treatment.2) Hoists are provided with antifrictional bearings on all high speed rotating parts.3) Machined component parts are checked by limit gauges. EASE OF MAINTENANCE:1) All parts of the Hoists requiring maintenance are made easily accessible. 2) Number of parts requiring frequent maintenance is kept minimum.3) Wearing parts can be easily removed and replaced thus reducing down time. RIGID INSPECTION:Stern inspection procedures at all stages of manufacture ensure unfailing dependability. SPECIFIC DESIGNADVANTAGES OF 'ELEPHANT BRAND' WIRE ROPE ELECTRIC HOIST: DESIGN:Hoists are designed for all classes of application as per IS-3938. Standard Design is for Class II. MODULAR CONSTRUCTION:Hoist is assembled from different independent units viz. Hoisting Gear Box, Hoisting Motor with brake, Rope Drum, Electric Control Panel and Travelling Trolley. All these units are separately accessible and promptly disassembled to simplify repairs, reduce maintenance cost and downtime. MAIN FRAME:M.S. Plates are fastened with number studs to withstand the load of the different independent units attached to it. WIRE ROPE:Hoisting rope comply with the Indian standards. The leading rope taken by the Drum, does not slip sideways when slack. The factor of safety, on the nominal breaking strength of the rope is six. ROPE DRUM:Grooved Drum, Seamless Pipe of adequate length to be wounded in one layer and to provide proper support for the rope to minimise abrasive wear is provided. Drum Shaft revolves on Ball Bearings for ensuring smooth running. ROPE GUIDE:Rope Guide is in two halves, ensuring easy accessibility. It encircles the Drum completely so that the rope may not uncoil even when the Hoist is in unloaded condition. MOTOR:Hoist Motor is an HTSC parallel rotor machine. Specially rated for Hoist duty, with minimum 40% CDF Rating and class B insulation. The unit is an IP 54 dust and damp proof enclosure, flange-mounted to the main frame of the Hoist. When creep speeds are required same is achieved by way of DC Clutch and Pony-Motor. GEAR BOX:Hoist Gear Box has specially treated gears for high wear resistance. Each Geared Shaft assembly is supported on bailor roller bearings, to ensure smooth, low-friction operation, the gear trains are greese lubricated. Also oil immersed Gear Box can be provided on request. BRAKE:Electromagnetic Fail-safe type brake mounted externally on the rear end of the Hoisting Motor ensuring easily accessibility. HOOK BLOCK:The Hook Block is tested to 150% of full load before assembly. The rope sheaves are fully guarded with protective steel castings. All sheaves rotate on Ball Bearings. TROLLEY:It consists of M.S. Plates forming side frame assembled with Runner-Wheels. Runner Wheels are mounted on Double sealed Ball Bearings. Trolley is adjustable for various I Beam sizes. LIMIT SWITCHES:A Limite Switch is built in as one of many safety features preventing accidental over-hoisting and over lowering of the hook block. The trip positions are adjustable to allow correct setting for installation. ELECTRIC CONTROL PANEL:Controls are mechanically and electrically interlocked to prevent inadvertent operation of opposite motions and are all housed in an IP 54 dust and damp proof enclosure. A low voltage control system of 110 Volts. Minimises electrical hazards for the operator. GUARANTEE:A Guarantee is provided for the repair and replacement, which proves defective material or workmanship within one year of the sale on Ex. Works Basis. However electrical appliances are not covered in this guarantee.NB:1) Microspeed arrangement, reducing normal speed by approx. 10% is provided on request at extra cost.2) Hoists are available in: - Power travel.- Hand operated travel.- Pull-Push travel.- Without travel (Fixed Mounting) with Higher Class Duty as per I.S. 3938.3) Every ELEPHANT Hoist is tested on 125% of its safe working load, before despatch and is issued with a Test Certificate.4) For full details of Hoist selection, Specifications, Dimensions and Performance Data, see overleaf.

We offer wide array of Electrical Hoists that are fabricated using advanced technology and premium quality materials. The Electric Hoists offered by us have been praised by our clients for reliable performance and flawless finish. Made in accordance with strict industrial standards, the hoists offered by us have cemented our place among the celebrated Electric Hoist Manufacturers and Suppliers from Thane, Maharashtra. Features : Flawless Finish Reliable PerformanceMade in accordance with strict industrial standards Capacity : 3 Ton to 20 Tons Lift : 3 Meters To 40 Meters Application : Hoists Cranes

Hoist-o-hind are manufacturers of hoists with a wide range of lifting capacity varying from 0.25 tons to 50 tons, They confirm to class II duty as laid down in IS 39381983. Hoists confirming to class IV as per IS 39381983 can also be supplied, Special adjusting system. Takes only a few minutes to adjust thus reducing the down time, Trolley is so designed that it is adaptable to wide range on I beam Sizes, Built-in safety limit switches control top and bottom position of the hoo, Hoist motors are designed for 'F' class insulation which is superior to class 'A' 'E' and 'B' types of insulations.

We Offer High Grade electric Chain Hoist that is Widely Demanded By Lifting Sector for Varied Applications. the Electric Chain Hoist that We Deal in is Available At Market’s Leading Prices. Furthermore, We are One of the Prime Manufacturers and Suppliers of Electric Chain Hoist in India. capacity 0.5 Tone to 3.0 Tones availability compact and High Efficient Motor:fixed Executionhand, Push Trolleyelectric Motorhand Chain Driven Trolley

We offer a large range of hoists – from 0. 5 t to 50t in accordance to various requirements of the vendor. The hoists offered as in a 2 fall / 4 fall / 8 fall configuration depending on client requirements and hoist capacities. Tried and tested over many years in critical and rugged industrial applications icon electric wire rope hoists are available in flameproof & non flameproof construction.  

We are supplier of this product. Wire rope electric hoist AS PER IS-3938 ELEPHANT BRAND" WIRE ROPE HOISTS ARE SUPERB COMBINATION OF MATERIAL AND LATEST TECHNOLOGY...SPECIAL FEATURES: HIGH EFFICIENCY: 1) These are designed for high speed operation to increase productivity. 2) Precision workmanship of all components minimises losses and increases efficiency. SHORT OPERATION: 1) Smooth operation is ensured by gears having precision machine cut teeth subjected to heat treatment. 2) Hoists are provided with antifrictional bearings on all high speed rotating parts. 3) Machined component parts are checked by limit gauges. EASE OF MAINTENANCE: 1) All parts of the Hoists requiring maintenance are made easily accessible. 2) Number of parts requiring frequent maintenance is kept minimum. 3) Wearing parts can be easily removed and replaced thus reducing down time. RIGID INSPECTION: Stern inspection procedures at all stages of manufacture ensure unfailing dependability. SPECIFIC DESIGN ADVANTAGES OF 'ELEPHANT BRAND' WIRE ROPE ELECTRIC HOIST: DESIGN: Hoists are designed for all classes of application as per IS-3938. Standard Design is for Class II. MODULAR CONSTRUCTION: Hoist is assembled from different independent units viz. Hoisting Gear Box, Hoisting Motor with brake, Rope Drum, Electric Control Panel and Travelling Trolley. All these units are separately accessible and promptly disassembled to simplify repairs, reduce maintenance cost and downtime. MAIN FRAME: M.S. Plates are fastened with number studs to withstand the load of the different independent units attached to it. WIRE ROPE: Hoisting rope comply with the Indian standards. The leading rope taken by the Drum, does not slip sideways when slack. The factor of safety, on the nominal breaking strength of the rope is six.

• Voltage: 230V
• Country of Origin: Made in India
• Capacity: Upto 20
• Usage/Application: Construction Industry, Warehouse
• Trolley Option: Without Trolley
• Chain Length: 4 m
• Material: MS
• Phase Type: Single
• Lifting Height Single Hook: 30 Mtrs (600 Kgs)

This is a economically priced product and are mainly used for medium duty applications. Easy to remove and install from one site to other. These are fitted on single girder cranes and also on monorail beams.

Electric Wire Rope Hoists, electric cranes, Electric Hoists, Gantry Cranes

flame proof electric hoists

Electric Hoist, Elevators

Electric Hoists, Jib Cranes, Single Girder Eot Cranes, monorail

flame proof electric hoists, crane radio remote control

Electric Wire Rope Hoists, EOT Cranes, Gantry Cranes, Jib Cranes

Electric Hoists, EOT Cranes, Goliath Cranes, grab buckets, Gearboxes

electric crane hoist, Thruster Brake, Cranes Components and Kits, hook blocks