Electronic Test Instruments Dealers in Naupada, Thane

• Type of Enclosure: IP 54, IP 65 or, Flameproof
• Conductivity Range: 0 to 2000 micros/cm
• Sensing Electrode: In SS316 construction with PTFE insulation
• Process Connection: 1/2
• Temperature Compensation: Can be provided

EHEDG and FDA certified Online Conductivity Transmitters are used in pharmaceutical Companies where there is a need to check the conductivity of the flowing or, stored liquids to maintain the quality of their product. Using the suitable controller and the suitable control valve, conductivity of the liquid can be  controlled.

As you must know Rain Water Harvesting - is the activity of collection of water. It can be either store for direct use or can be recharged into the ground. As studied above, while dealing in second part of the definition that – “it can be recharged into the ground”. Resistivity test is the key factor. As we know the underground strata broadly it is - soil then Murom layer next is the Hard Murom & then the Basalt or in some cases it is marine clay & basalt.

digital lcr meter, Lcr Meter, Led Dome Lights

We offer an exclusive range of Digital D.O. Meters to our customers. These are used to evaluate oxygen liquefy in water and index of biological and physical processes in water. With the specification of power 230V A.C. 50 Hz and range between D.O. 0 to 20.0 PPM, these are highly durable and accurate.  

CX-505 measures pH, redox potential (mV), conductivity, salinity, resistivity, concentration of oxygen dissolved in water in % of saturation or in mgl, atmospheric pressure and temperature. The measurements made in all measuring functions are of very high accuracy and stability. Unification of the procedures in all measuring functions makes working easier. “HOLD” function to freeze the result on the display. Signalisation of the result stabilisation “READY” with symbol and sound. Possibility of sending to a PC a report of calibration - up to 10 last calibrations.

A cylindrical Main capsule fitted with powerful magnet, which moves up & down alongwith the level rise or fall. This movement will be magnetically coupled with the follower Red indicator outside the chamber which is enclosed in the glass tube.MOC - C.S./S.S. 304/ SS 316/ PP/PVDF/PTFERange - 250 MM - 3000 MMConnection - 100 NB & 150 NB, Flanged typeFloat - SS-304/316 L, Glass, HDPE, PP, PVDF, PTFE ECTFE / HalarcoatedApplication - Suitable for hazardous, expensive, poisonous & flammable liquids. Option : Can be provided with level transmitter & with or without HART-Protocol We are one of the foremost manufacturers and suppliers of a comprehensive assortment of Side & Top Magnetic Level Indicator. Our range is appreciated for higher degree of accuracy, precision & compact design, durability and longer service life.. Side Mounted Magnetic Level Indicator: A cylindrical S. S. float fitted with powerful magnet, which moves up & down alongwith the level rise or fall. This float movement will be magnetically coupled with the follower Red indicator outside the chamber which is enclosed in the glass tube.MOC - C.S./S.S. 304/ SS 316/ PP/PVDF/PTFERange - 250 MM - 3000 MMConnection - 100 NB & 150 NB, Flanged typeFloat - SS-304/316 L, Glass, HDPE, PC PVDF, PTFE ECTFE / HalarcoatedApplication - Suitable for hazardous, expensive, poisonous & flammable liquids.Option - Can be provided with level transmitter with or without HART-Protocol.

• Frequency: 128 Hz
• Measurement Range: Up to 0.1 Ohms
• Accuracy: 2%
• Display: 3½ digit, Low battery indication
• Battery: 12 V 1.5 Ah, rechargeable
• Weight: 1.5 kg
• Dimensions: 225 mm x 150 mm x 75 mm
• Working Temperature: 0 C to 55 C

In order to reduce Broadband and ISDN Line transmission losses, it is essential to check Earth resistance. With this tester we can check earth resistance up to 0.1 ohms. We can also measure soil resistivity. Unit works on chargeable battery. Necessary accessories along with charger are provided with unit. Features Measurement up to 0.1 Ohms Accuracy up to 2% Digital display Generated signal is not in range of harmonics of mains supply to avoid interference Test resistor are provided to confirm calibration Low battery consumption Battery is chargeable maintenance free type Heavy duty accessories provided for proper reading Operation Short left side two terminals E1 & P1 and connect it to point whose resistance is to be measured. This wire should be shortest possible. Connect other 2 wire provided along with unit to other two terminals. Fix the rods at app.10 to 15 meters in different directions. Pour a glass of water on the rod to make good contact. Select 2V range & press test button. Then display will give direct reading of earth resistance.  

• Range: 300 mm to 6000 mm.
• Temp. Rating: 150 Deg C.

Magnetic level indicators are used to measure the level of fluids. Fabricated using superior quality basic material by employing advanced machinery and sophisticated tools, these products compiled to the defined parameters of the industry in an efficient manner. These magnetic level indicators are mainly used in the hazardous pressurized vessels. Therefore, customers can avail these offered products from us in multifarious sizes and specifications as per their requirement.

• Brand Name: AVI
• Accuracy: 0.5 percentage of full scale
• Voltage: 240 V
• Application: Laboratory
• Power Source: Electric
• Usage/Application: Laboratory
• Material: SS
• Display Type: Digital

Energy Meter, Barcode Label, pressure sensitive labels, Stickers

Side Mounted Magnetic Level Indicator, Electromagnetic Flow Meter

battery monitors, battery management systems, Line Of Sight Surveys

Current Datalogger, rotating vane anemometer

electronic microcontroller, Rgb Controller, temperature controller timer

digital earth tester, line testers, board band line testers