Emco Dynatorq Pvt. Ltd. Panchpakhadi, Thane, Maharashtra

Electro-hydraulic drum brakes can be extensively used for various mechanism deceleration and stop braking of various belt transport, port handling, hoisting,metallurgical,mining and building machinery. Interlocking shoes clearance balancing device and shoe auto-aligning device ( patented technology ), constantly equalize the clearance of brake shoes on both sides and no need to adjust, thus completely avoid one side of brake lining sticking to brake disc.

Thruster brakes, Interlocking shoes clearance balancing device and shoe auto-aligning device ( patented technology ), constantly equalize the clearance of brake shoes on both sides and no need to adjust, thus completely avoid one side of brake lining sticking to brake disc.

Type 14.448 (Spring Loaded DC Fail Safe Brakes) :: ::Salient Features :: ::>Adjustable Brake Torque ::>Optimized Torque Steps ::>Simple Wear Adjustment ::>High OPerating Frequency & Reliability ::>Low Power Requirement ::>Low Rotor Inertia ::>Two Friction Surfaces ::>All Metal Parts Protected From Rust ::>Coil With Class 'F' Insulation ::>Residual -Free ::>Fast Switching Times ::>Simple Construction ::>Stationary Field (No Slip Rings) ::>Consistent Operating Characteristics ::>Raw Materials To DIN Standards ::>No Restrictions On Mounting Positions ::>Registered Designs 156544 ::

Type 14. 105(Shaft Mounted Clutches) :: ::Salient Features :: ::>Single Plate Dry Type. ::>Zero Backlash. ::>Residual-Free. ::>Fast Switching Times. ::>High Operating Reliability. ::>High Operating Frequency. ::>Compact Dimensions. ::>Simple Construction. ::>Maintenance-Free. ::>Long Life. ::>Special Installation. ::>Unique Pre - Stressed Spring. ::>Stationery Field (No Slip Rings). ::>Consistent Operating Characteristics. ::>Simple Wear Compensation Adjustment. ::>Slotted Armature For Torque Stability. ::>Coil With Class "F" Insulation. ::>Low Inertia Of Rotating Parts. ::>Raw Materials To DIN Standards. ::>No Restriction On Mounting Positions. ::>Registered Designs. :: :: ::

Consisting of a pressure plate, hub and torque assembly, the model CW is designed for mounting on any suitable flat surface on either the drive or driven side of the power transmission system where the flat surface is large enough to accommodate the bolt circle of the pressure plate. The compact size of the CW permits installation in areas that might not be considered suitable for other type clutches.

Emco Simplatroll DC Electro Magnetic Flange Mounted Brakes(Normally Off) are designed for high consistent operating characteristic. With torque range 0.6-2.4 Nm. These Brakes are available with 3 different design to stop the drive or load side either shaft, pulley, sprocket. These are maintenance free & provided with unique pre-stressed spring made of German Spring Steel & coil with F insulation to give million of operations without fatigue. With asbestos free friction materials & long life.

Type 14.105(Flange Mounted Clutches) :: ::Salient Features :: ::>Single Plate Dry Type. ::>Zero Backlash. ::>Residual-Free. ::>Fast Switching Times. ::>High Operating Reliability. ::>High Operating Frequency. ::>Compact Dimensions. ::>Simple Construction. ::>Maintenance-Free. ::>Long Life. ::>Unique Pre-Stressed Spring. ::>Stationary Field(No Slip Rings). ::>Consistent Operating Characteristics. ::>Simple Wear Compensation Adjustment. ::>Slotted Armature for Torque Stability. ::>Coil with Class "F" Insulation. ::>Special Friction Material. ::>Simple Installation. ::>Low inertia Of Rotating Parts. ::>Raw Materials To DIN Standards. ::>No Restriction on mounting positions. ::>Registered Designs. ::

Electromagnetic clutch, With torque range 7.5-2500Nm. These clutches are available with 3 different design to connect drive side either shaft, pulley, sprocket. Clutches can be engaged at high speed. These are maintenance free & provided with unique pre-stressed spring made of German Spring Steel & coil with F insulation.

Emco Simplatroll DC Electromagnetic Flange Mounted Brakes are designed for high consistent operating characteristic. With torque range 7.5-2500Nm. These Brakes(Normally Off) are available with 3 different design to stop the drive or load side either shaft, pulley, sprocket. These are maintenance free & provided with unique pre-stressed spring made of German Spring Steel & coil with F insulation to give million of operations without fatigue. With asbestos free friction materials & long life.

Electromagnetic brake, Emco Simplatroll DC Electromagnetic Flange Mounted Brakes are designed for high consistent operating characteristic. With torque range 7.5-2500Nm. These Brakes(Normally Off) are available with 3 different design to stop the drive or load side either shaft, pulley, sprocket. These are maintenance free & provided with unique pre-stressed spring made of German Spring Steel & coil with F insulation to give million of operations without fatigue. With asbestos free friction materials & long life.

Type 14.137(DM EM open Clutch-Brake Combinations) :: ::Salient Features :: ::>Single Plate Dry Type. ::>Zero Backlash. ::>Residual-Free. ::>Fast Switching Times. ::>High Operating Reliability. ::>High Operating Frequency. ::>Compact Dimensions. ::>Simple Construction. ::>Maintenance-Free. ::>Long Life. ::>Unique Pre-Stressed Spring. ::>Stationary Field(No Slip Rings). ::>Consistent Operating Characteristics. ::>Simple Wear Compensation Adjustment. ::>Slotted Wear Compensation Adjustment. ::>Coil With Class "F" Insulation. ::>Special Friction Material. ::>Simple Installation. ::>Low inertia Of Rotating Parts. ::>Raw Materials To DIN Standards. ::>No Restriction On Mounting positions. ::>Registered Designs.

Type 14.115 (DC EM Flange Mounted Brakes) :: ::Salient Features :: ::>Single Plate Dry Type. ::>Zero Backlash. ::>Residual-Free. ::>Fast Switching Times. ::>High Operating Reliability. ::>High Operating Frequency. ::>Compact Dimensions. ::>Simple Construction. ::>Maintenance-Free. ::>Long Life. ::>Unique Pre-Stressed Spring. ::>Stationary Field(No Slip Rings). ::>Consistent Operating Characteristics. ::>Simple Wear Compensation Adjustment. ::>Slotted Wear Compensation Adjustment. ::>Coil with Class "F" Insulation. ::>Non Asbestos Special Friction Material. ::>Simple Installation. ::>Low inertia Of Rotating Parts. ::>Raw Materials To DIN Standards. ::>No Restriction on mounting positions. ::>Registered Designs. :: ::

DC EM Encased Electromaganetic clutch-brake units(Type 14.800) :: :: ::Salient Features :: ::>Five Sizes From 7.5 To 120 NM. ::>Non Asbestos Free Friction Linings. ::>Patented Air Gap Adjustment From >Outside Without Dismantling The Unit. ::>Two Axis Heights Available For Each Size. ::>Rivetless Low Inertia Armature.

Type 14.125 (DC EM Encased Clutch-Brake Combinations) :: ::Salient Features :: ::>Simple To Fit. ::>Ready In Assembled Form ::Strong Bearing Design. ::>Totally Encased Unit. ::>Air Gap Adjustable Without >Dismantling. ::>Good Heat Dissipation Through Increase Surface Area. ::>Backlash Free Torque Transmission. ::>High Operating Frequency. ::>Long Life. ::>Single Plate Dry Type. ::>Fast Switching Times. ::>High Operating Reliability. ::>Stationery Field (No. Slip Rings). ::>Consistent Operating Characteristics. ::>Simple Wear Compensation Adjustment. ::>Slotted Armature For Torque Stability. ::>Coil With Class "F" Insulation. ::>Special Friction Disc ::>Low Inertia Of Rotating parts. ::>Raw Material To DIN Standards. ::>Registered Designs. No. 152335 ::

DC EM Clutch-Clutch Unit(Single Shaft) :: ::Salient Features :: ::>Single Plate Dry Type. ::>Zero Backlash. ::>Residual-Free. ::>Fast Switching Times. ::>High Operating Reliability. ::>High Operating Frequency. ::>Compact Dimensions. ::>Simple Construction. ::>Maintenance-Free. ::>Long Life. ::>Unique Pre-Stressed Spring. ::>Stationary Field(No Slip Rings). ::>Consistent Operating Characteristics. ::>Simple Wear Compensation Adjustment. ::>Slotted Wear Compensation Adjustment. ::>Coil With Class "F" Insulation. ::>Special Friction Material. ::>Simple Installation. ::>Low Inertia Of Rotating Parts. ::>Raw Materials To DIN Standards. ::>No Restriction On Mounting Positions. ::>Registered Designs. ::

DC EM Clutch-Brake Unit(Single Shaft) :: :: ::Salient Features :: ::>Single Plate Dry Type. ::>Zero Backlash. ::>Residual-Free. ::>Fast Switching Times. ::>High Operating Reliability. ::>High Operating Frequency. ::>Compact Dimensions. ::>Simple Construction. ::>Maintenance-Free. ::>Long Life. ::>Unique Pre-Stressed Spring. ::>Stationary Field(No Slip Rings). ::>Consistent Operating Characteristics. ::>Simple Wear Compensation Adjustment. ::>Slotted Wear Compensation Adjustment. ::>Coil With Class "F" Insulation. ::>Special Friction Material. ::>Simple Installation. ::>Low Inertia Of Rotating Parts. ::>Raw Materials To DIN Standards. ::>No Restriction On Mounting Positions. ::>Registered Designs.

The unit comprises of an electromagnetic clutch and brake, which can be used for continuous start stop function in any drive transmission arrangement of any machine or mechanism. The standard unit comes with an input and output shaft which can be coupled with any other input and output shaft or other items. Flange mounted option for either input or output or both is also available and hollow shaft instead of solid shaft in input or output or both is also available which facilitates an outside driving or driven shaft to be inserted inside the unit.

The primary application of rectifiers is to derive DC power from an AC supply. This rectifier having capacitor & spark suppressor to protect the diode bridge circuit. Spark suppressor protects the coil and contact against impermissibly high induced voltages during DC switching. In the absence of a suppressor circuit, the induced voltage may exceed the permissible values and cause coil failure.

Type 5000 (AC Self Adjusting Fail Safe Brake) :: ::Salient Features :: ::>Suitable For Metric Motor Frames ::>Fast Installation ::>Self Adjusting ::>Fast Acting ::>Negligible Maintenance ::>Higher Brake Torque ::>Manual Release

Type 1000 (AC Fail Safe Brakes) :: ::Salient Features :: ::>Suitable For Metric Motor Frames ::>Fast Installation ::>Fast Wear Adjustment ::>Fast acting ::>Negligible Maintenance ::>Higher Brake Torque ::>Friction Disc, Made Of Non-Asbestos type Moulded Material, Can Withstand High Surface Temperature ::>More Number Of Operation Per Hour ::>Manual Release