Filling Line Dealers in Ghodbunder Road, Thane

Effluent Treatment Plant for oil manufacturing unit consisting of primary,secondary and Tertiary Treatment.

Setup for fixing cap on spools. The cap fed with vibratory Bowl Feeder. Spools fed with rotary feeder on a belt conveyor. Caps positioned and pressed over the spools. Capacity 100 assemblies min.

Water mist systems are used for special applications in which it is decided that creating a heat absorbent vapor is the primary objective. This type of system is typically used where water damage may be a concern, or where water supplies are limited. NFPA 750 defines water mist as a water spray with a droplet size of "less than 1000 microns at the minimum operation pressure of the discharge nozzle." The droplet size can be controlled by the adjusting discharge pressure through a nozzle of a fixed orifice size. By creating a mist, an equal volume of water will create a larger total surface area exposed to the fire. The larger total surface area better facilitates the transfer of heat, thus allowing more water droplets to turn to steam more quickly. A water mist, which absorbs more heat than water per unit time, due to exposed surface area, will more effectively cool the room, thus reducing the temperature of the flame.

Salient Features Modular Design Energy Saving-Heat/Stream/Water/Power No Toppling of Bottles Occupying Less Space PLC Based-Download real Time data via Scada System Structure has been sand blasted for asthetics and increase life of structure. Energy Saving Overflow and Buffer System.

Our Cup Filling Machine is a user-friendly machine, which consume lesser energy for operation. We are acknowledged for maintaining transparency in our business operations and thus we offer only secured payment processing methods. Want to obtain Cup Filling Machine at market's lowest prices? Deal with us. We are famous supplier of Cup Filling Machine

• 3 steps filling control Coarse, Fine, Super Fine: Best in class filling accuracy with +/- 0.03 – 0.05% of FS
• Resume Filling Function: 1. Power failure 2. Material weight not increasing 3. Emergency Button 4. Air Failure / Air Pressure Drop Alarm: Intuitively designed system to ensure auto-judge abnormal behavior due to errors and take corrective actions. Hence, enhancing operators productivity.
• Fail Safe ball valve: Ensuring protection against spillage or overfill in event of Air failure.
• Jog Mode: System automatically judges under filling error and corrects filling accordingly.
• Min/Max Tare Weight Check: Ensures filling start on placement of correct drum.
• Multiple filling targets: High end filling controller capable of storing multiple drum types with set points; ensuring quick changeover of drums.
• Auto in-flight Correction: Auto judgment of in-flight material to reduce overfilling.
• Reporting features: 1. Daily Accumulation with No. of containers filled 2. USB Data Transfer: Data: Various reporting feature benefits customer in their day to day operations ensuring daily production data available for factory reporting purposes.
• Flow Rate display: Assist in Identifying reasons of filling inaccuracy
• Capacity: Single Drum: 50kg, 100kg, 300kg; Multi Drum & Tote: 1000kg, 1500Kg, 2000kg
• Readability: Single Drum: 10gm, 20gm, 50gm; Multi Drum & Tote: 100gm, 200gm
• Lance Assembly: Standard: SS304; Optional: SS316, SS316L, Teflon lined
• Ball Valve: Standard: 3 position Electropneumatic SS304; Optional: SS316, SS316L, Teflon Lined, Triport
• Platform Size & MOC: Single Drum: 600 x 800mm; Multi Drum: 1000 x 1000mm to 2000 x 2000mm Standard: MS / SS; Optional: SS / SS
• Power Requirement: 230V AC, 50Hz
• Air Requirement: 6- 8 bar
• Product Line Connection Required: Flexible Product hose 1 ½ " NPT connection standard
• Data Transfer: Standard: USB  Optional: Data logging Software, Printer, PLC
• Platform Roller Ass. [Optional]: Single Drum: 600 x 800mm; Multi Drum: 1000 x 1000mm to 2000 x 2000mm Standard: MS / SS; Optional: SS / SS
• Ramp Roller Ass. [Optional]: Single Drum: 600 x 800mm; Multi Drum: 1000 x 1000mm to 2000 x 2000mm Standard: MS / SS; Optional: SS / SS
• Material Handling [Optional]: Non - Motorized & Motorized Roller Conveyors [with or without Traffic Management] Structure: MS Powder coated or Ss304 Rollers: MS Zinc Plated, SS304, SS316
• Hazardous Area [Optional]: Available for Zone 1 IIA/IIB, Zone 2 IIA/IIB, Zone 2 IIC
• Gas Purging: Available with Nitrogen or Steam
• Jacketing & Insulation: Lance & Ball Valve: Insulation / Electric Heater / Hot Water Jacket / Steam Jacket

We have weighing & bagging machines as per specific material characteristic. For Free Flowing material (granular) we provide Gravity Feed machine. For Powder application we provide screw Feed Bagging Machine. We have machine suitable for Open mouth bags and valve type bags. • Manual aid can auto-complete following work:o Weighing, filling, nipping-bags, sealing bags and conveyingo Due to it is designed according the GMP standard, it more fits the fluidic or low fluidity materials, such as milk powder, fodder, rice powder, white sugar, coffee powder, mono sodium glutamate, solid beverage, dextrose, pharmaceuticals, and agriculture pesticide, granular additive, dyestuff and more• Main features:o Whole structure of the machine made of stainless steel except the motor, cylinder, electrical accessories, pneumatic components, sewing machine. In particular the application of GMP, food sanitation certification.o Easy to remove the residual material: the screw can be directly inserted and draw out alone for washing• Technical parameters:o Metering mode: weighing (with the packing bag)o Packing weight: 5 to 25, 25 to 50kgo Feeding mode: double screw feeder (or vibrator feeder)o Filling accuracy: ≤±0.2% / sigmao Sealing machine: heat sealing machine + sewing machineo Filling rate: ≤3 bags/minute

• Type: Automatic
• Certification: CE Certified
• Weight: 1000-2000kg
• Capacity: 25 - 250 KLD
• Technology: MBBR / SAFF / SBR / MBR
• Typical Industries: Medium Scale Industries, Housing Complex, Labor Camps, etc.

We Design, Fabricate, Supply, Erect and Commission Sewage Treatment Plants (STP) for treating sewage generated by Industry, large colonies, Hotels, Hospitals, IT Parks and commercial buildings. Its working on the principle of Aerobic Treatment with the help of aerobic bacteria, which is most conventional and proven method throughout the world. PCECPL Modified Septic Tank (MST) Systems - Its works on principle on anaerobic digestion. Technologies Used ASP : Activated Sludge Process MBBR : Moving Bed Bio reactor SAFF : Submerged aerated Fixed Film SBR : Sequential Bioreactor MBR : Membrane Bio Reactor Features : Semi-automatic Operation. Easy to transport & Installation MOC of Tank = MS-FRP (Coated) /MSEP. Completely above ground Installation.

• Country of Origin: India
• Type: Capsule Filling Machine
• Weight: 4000-5000kg
• Voltage: 440V

The semi-automatic capsule filling machine is user friendly with advanced features. It is designed for precision manufacturing requirements for modern pharmaceutical procedures.the machine provides a high degree of automation with higher levels of filling weight accuracy.these machines are suitable for filling capsule of all size (#00-#5) with powder,pellets and granules. Cgmp standards has been taken care during manufacturing the machine gives an approximate output of 25000 capsuleshour in single loader. Technical specification: model: single head machine output: 25,000-30, 000 capsulehour electrical main drive: 1hp, 440 volts, 50 hz, 700 rpm filling drive with reduction gear box: 0.5hp,440 volts,3 phase,50hz,1440rpm vacuum pump motor:3 hp,440 volts,3 phase,50 hz,1440 rpm vacuum: 500mm (20) of hg at 1000 liters min compressed air 200 litersmin (8cfm) at 100 psi dimension : 1650mm* 1250mm* 1650mm* (l*w*h) net weight: 550 kg approx

We bring forth Automatic Form Fill and Seal Machine, which is efficient and manufactured from high quality components. The Automatic Form Fill and Seal Machine is used in situations where centre sealing is needed. The Automatic Form Fill and Seal Machine come in use when the products are free flowing or non flowing. Features : Body constructed of stainless steelDie pressure Fully controllableEasy to useHigh quality

Neck holding No bottle no rinsing no filling and no capping Single stage rinsing (final water) Non contact sensors Separate cap Hopper having capacity 50 Caps

Description The machine consists of input conveyor, filling unit & exit conveyor. Filling operations works on the piston & cylinder, & N.R.V concepts. Filling unit consists of 2 Piston Cylinder assly. & non – return values for this. Common drive is taken. When bottles or jars comes under filling station a stopper mechanism holds the bottles till the filling takes place & release after filling finishes. At a time two bottles will filled & comes out from exit conveyor. From exit conveyor bottles will be transferred to the input conveyor of capping machine.

array of Automatic Pillow Pressing Machine. Features: Reliable Longevity Industry proven designs Fine quality

e offer excellent Chilling Plants that are made from premium quality materials that offer strength and durability to our plants. Offering systems in Compression as well as Absorption type refrigeration is our strength. Freon as well as Ammonia refrigeration systems are installed by us not over across India but also at African subcontinent. Brine water systems using calcium chloride, Methanol, Glycol are installed for achieving temperatures lower than zero. The Chilling Plants provided by us are available in different sizes and capacities to cater to the different demands of our clients. Cooling of equipments by circulation of water through jackets , Plate heat exchangers , Shell and Tube or Pipe in Pipe heat exchangers are handled with ease by our design and project teams. The energy saving Ice Bank Tank is the most effective product offered by us . Industries Covered : � Engineering for Jacket cooling � Chemicals and Textiles for jacket cooling . � Dairy and Dairy Products � Cold Stores � Brine Plants � Plastic and Extrusion � Paints � Ice Factories The basic features of our plant are .   Compressor : The compressors used by us are of the following types � Open Type � Sealed Type � Semi sealed scroll Type of Kirloskar � Danfoss, Voltas, Kirloskar, Bock, Bitzer etc   Evaporator / Condenser : � Shell & Tube design � PHE type design evaporators � Pipe in pipe Type. � Coils Type Immersion Refrigeration controls : � Ranco � Danfoss � Indfoss/subzero

THIS PRODUCT IS SUITABLE FOR PRINTING ON LIQUOR CAP PRINTER, PLASTIC CORK PRINTER AND ALCOHOL CAP PRINTING MACHINE, CYLINDRICAL & CONICAL WIDE MOUTH JARS, (RIGID&FLEXIBLE), CLOSURES(ALUMINUM & PLASTICS) UP TO 60 MM DIAMETER  Auto Loading & Ejection Online UV Varnish  4 color  printing UV dryer Speed 60 Caps/Min  PLC with HMI  OPTIONAL FEATURES Mechanical auto loader Flame treatment with auto ignition 4 color / 6 color printing Instantaneous uv drying on mandrel Auto ejection on exit conveyor centralized auto lubrication system Auto Feeder SPECIFICATIONS   Min. Dia. and Height 28mm * 15mm Max Dia. and Height 50mm * 45mm Max Print Area 150mm (L) * 45mm (H) Pneumatic Pressure @ 5-6 kg/cm2 Electric Motor Drive AC Gear Motor 3HP, 3phase, 50 Hz with inverter Air Consumption 8m3/hr

We at Ansys manufacture various types of Filtration Skid, for Amine Filtration, Water Filtration etc. We can supply pre fabricated skid as well as fabricate the skid at customers site as desired.The scope includes Designing, Detail Engineering, Project management, procurement, Installation, Erection & commissioning of the whole system. We have in house facility for Fabrication of such items equipped with latest machineries and skilled workers. For more info please share your requirements on our email.

WE also manufacture other pharmaceutical machinery like Filter Press, Vial Filling Machines, Oil Filling Machines, Jam Filling Machines, Grease filling Machines. We can manufacture filling machine which can fill upto 150 bottles per minute. Our Filling machine can fill any type of liquid from water to honey. All our filling machines are manufactures from Mumbai Factory and supported from our Mumbai Factory. We have been providing services in Filling Machines and Capping Machine from many years and are well known for our services.Manufactured & Supplier of various types kinds of Liquid Filling Machine and Filter Press like Vial Filling Machines, Oil Filling Machines, Jam Filling Machines, Grease filling Machines Capping Machine, Honey Filling Machine Oil Filling Machine,Mineral Water Filling Machine,Sparkler Filter Press,Zero Hold Up Filter Press & Homoginizer at unbelievable prices.

Automatic RFC Machine, Blow Molding Machine, Pet Blow Moulding Machine

Edible Oils, cummins dg set, Tractor Tyre, Motorcycle Tyre, Industrial Tyre