Flow Meter Dealers in Naupada, Thane

• End Connections: Flanged Ends, Tri-Clover Ends, SMS type or, Wafer type
• Meter Sizes: DN 10 up to DN 2000
• Outer Body Materials: MS or, SS
• Liner Materials: Soft or, Hard Rubber, PTFE, PFA or, Neoprene
• Electrode Material: Hastelloy C or, B, Titanium
• Velocity suitability: 0.5 up to 10 M/Sec.

 We have Electro Magnetic Flow Meters, which has Digital Readout for Flow Rate as well as Total Flow. The Digital Indicator unit can be Field mounted or, Panel mounted. The very important point about Electro Magnetic type Flow Meters is, the fluid passing through it must be conductive, The conductivity of the liquid must be at least 0.5 µS/Cm.These meters are also called as Magflow or, EM Flow Meters. These meters has no any moving parts in it, so these very well recommended for food grade applications like juices, milk, Municipal or, Industrial Water, etc. Because there are no moving parts in it, these meters are also suitable for liquids were there are lot of suspended particles like Sewage, Waste Water, Chemicals, Slurries etc.Electromagnetic Flow Meters are available in three types on the basis of their construction. : Full Bore type Electromagnetic Flow Meters, Sandwich type Electromagnetic Flow Meters and Insertion type Electromagnetic Flow Meters.Insertion type Electromagnetic Flow Meters are provided along with Hot Tab Assembly for the safty in use, ease in installation and ease in maintenance.

• Material: Stainless Steel
• Display: Digital
• Accuracy: 0.5%
• Electronics Enclosure: IP 66
• Voltage: 24 V DC
• Country of Origin: Made in India
• Flow Media Type: Liquid
• Application Media: Flow Measurement of flowing liquid through pipe line
• Power Supply: 24 V DC
• Size: 1" up to 10"

We offer Electromagnetic Type Flow Meter. Service: all type of conductive liquids. (minimum conductivity 5 µs/cm)working principle : faraday's law of electromagnetic induction. range : 5 to 10000 lpmpipeline size : 10 mm up to 350 mm in full bore type and insertion type for line size above 350 mmaccuracy : 0.5% of the reading in case of full bore type and 2% of the reading in case of insertion type.min. Velocity : 0.5 meter per secondflow indication : digitaltransmitter unit : integral or remote mounted indicator unit : integral or panel mountedenclosure : water proof (ip 65) or flameproof max. Working temperature : 120 degree cmax. Working pressure : 40 bar in full bore type and 15 bar in insertion type.power supply : 230 v ac)applications : indication of flow rate passing through the pipeline.

• Display: Digital
• Accuracy: + / - 1% OF SPAN
• Brand Name: Scientomech
• Application Media: Any Liquid
• Power Supply: 230 VAC
• Flange Size: 15 mm to 300 mm
• Electronics Enclosure: IP67
• Flow Range: 0.3 to 10 m/s

We are the leading manufacturers, exporters and supplier of this products.

Mechanical volumetric flow-meter for private use, with Nutating-disc type chamber for deliveries to 120 min. lt can be installed for gravitational feeding'

Magnetic flow meter virtually approaches the ideal flow meter suitable for wide range of liquid flow measurements even with very low conductivities. The meter offers no resistance to flow hence the pressure drop is almost negligible. The measurement being based on Faraday’s law of Electromagnetic induction, is independent of viscosity, density, pressure & temperature of flowing medium. The measurement is not affected by solid impurities as long as the min. conductivity of 5 scm is available. It is a true volumetric flow measurement. We offer various materials of construction for meter lining & electrodes to cover majority of corrosive liquids.

flow transmitters, conductivity indicators, Flow Indicators

The Gas Flow Meter is orifice flow meter measures flow by inserting an Orifice Plate in the block between the pipes.The Differential pressure is detected by highly sensitive differential pressure transducer, by which the pressure drop is very low.

orifice flow meter is the heart of the Orifice Meter. It restricts the flow and develops the Differential Pressure which is proportional to the square of the flow rate. The flow measuring accuracy entirely depends upon the quality of orifice flow meter , its installation and maintains.

Range - 25NB To 300NB. Inbuilt Pressure and Temperature Compensation Extended Neck for High Temperature Application Integral and Remote Electronics Available End Connection - Flgd / Sandwitch / Insertion Type also Upto 2mtrs Pipe ID Material of Construction - 55 304/316 NIBR

magmeter rotameter, Low Flow Rotameter, flow switch rotameter