Flow Meter Dealers in Thane West, Thane

We offer bpc flowmeter. Made for discriminating overseas & domestic customers who demand bpc flowmeters made from brass. Note: the single pipeline adaptor shown fitted to the bpc flowmeter in the illustration is sold separately.

Turbine Flow Meter or Digital Water Meter is employed for fluid flow measurement in clear liquids. It is also used in gases in general industrial applications for volumetric flow measurement. Turbine Flow meter's performance is outstanding when accuracy, quality & consistency in operation is concerned. Electro-magnetic flow meters suffer from the drawback that the flowing media or liquid must be conductive in nature, whereas such is not the case with Turbine Flow meter, which provides excellent performance even in non-conductive liquids like kerosene, petroleum, vegetable oil etc.

We manufacture a wide range of today's most advanced digital gas flow meters. Each gas flow meter meets exacting standards and can be customized to meet your flow gas meter application requirements (often free of charge). For easy system automation, we offer a full suite of digital communications solutions for our mass flow meters and controllers

EXAIR’s Digital Flowmeter is the easy way to monitor compressed air consumption and waste! The digital display shows the exact amount of compressed air being used downstream. This makes it possible to save thousands of dollars per year in compressed air waste – helping to identify costly leaks or inefficient air products. Many companies install the Digital Flowmeter on each major leg of their air distribution system to constantly monitor and reduce compressed air usage.   Advantages • Easy to install • Summing Remote Display And Data logger Available • No Moving Parts • Sensitive At Low Flows • No Calibration Or Setup required • Includes All Components For Installation • Model From 1/2" to 4 Schedule 40 Iron Pipe in Stock • Model Are Available For Sizes 1/2" to 6" in Iron Pipe • Model Are Available For Sizes 3/4" to 6" in Copper Pipe

• Brand Name: Kritsnam technologies
• Country of Origin: India
• Finishing: Polished
• Feature: Attractive Look, Durable, Easy To Fit, Fine Finish, Perfect Shape, Scratch Resistance, Shiny Look, IP68

Flow Meter transducer adapts to measure the liquid rate and total flow rate of low viscosity and for clear liquid. It can be widely used in the fields of petrol, chemical Industry Metallurgy , Scientific research for measuring or control. Several output display methods can be selected.

• ASTM D1238: Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer Method A
• ASTM D2839: Standard Practice for Use of a Melt Index Strand for Determining Density of Polyet
• ASTM D3364: Standard Test Method for Flow Rates for Poly(Vinyl Chloride)
• ISO 1133: Plastics -- Determination of the melt mass-flow rate (MFR) and melt volume-flow ra

The manually operated test procedure is very simple to undertake. Molten Polymer is extruded through a closely controlled orifice (die)from the apparatus using pre set conditions of temperature and pressure produced by a dead weight system. The extruded polymer is cut off manually and is then weighed. Using the time interval to extrude the polymer its flow rate over 10 minutes can easily be determined, thus giving the Melt Flow Index (MFI) or Melt Mass Flow Rate (MFR) in g/10 min. By conducting a simple Density Test at test temperature on the same material using the same pre set conditions and a known piston travel distance the Melt Volume Rate (MVR) can also be determined.The 6MBA Melt Flow System is supplied as standard with a replaceable hardened steel cylinder liner, standard test die and piston along with 2.16 kg test load and cleaning ancillaries. The temperature controller used is a 16th DIN type and displays the current temperature and set point and is accurate to 0.1 deg C. A PT100 Platinum Resistance Thermometer is used to accurately control the temperature of the barrel. The maximum allowable temperature variation along the length of the cylinder liner is in accordance with ISO1133 International Test Standard. An integrated timer is also fitted to accurately time the extrusion of the material in seconds to enable you to calculate the Melt Mass Flow Rate (MFR). All documentation is supplied including a product user manual and a fully traceable calibration certificate.Optional weights can be supplied to cover all testing parameters to International Test standards and for the heavier weights the optional weight loader can fitted to the apparatus for ease in loading the piston. The weight loader can also be used as a hold back feature for materials which have a high flow rate.  The 6MBA is the basic model offered within the Ray-Ran Range of Melt Flow IndexersThe manually operated test procedure is very simple to undertake. Molten Polymer is extruded through a closely controlled orifice (die)from the apparatus using pre set conditions of temperature and pressure produced by a dead weight system. The extruded polymer is cut off manually and is then weighed. Using the time interval to extrude the polymer its flow rate over 10 minutes can easily be determined, thus giving the Melt Flow Index (MFI) or Melt Mass Flow Rate (MFR) in g/10 min. By conducting a simple Density Test at test temperature on the same material using the same pre set conditions and a known piston travel distance the Melt Volume Rate (MVR) can also be determined.The 6MBA Melt Flow System is supplied as standard with a replaceable hardened steel cylinder liner, standard test die and piston along with 2.16 kg test load and cleaning ancillaries. The temperature controller used is a 16th DIN type and displays the current temperature and set point and is accurate to 0.1 deg C. A PT100 Platinum Resistance Thermometer is used to accurately control the temperature of the barrel. The maximum allowable temperature variation along the length of the cylinder liner is in accordance with ISO1133 International Test Standard. An integrated timer is also fitted to accurately time the extrusion of the material in seconds to enable you to calculate the Melt Mass Flow Rate (MFR). All documentation is supplied including a product user manual and a fully traceable calibration certificate.Optional weights can be supplied to cover all testing parameters to International Test standards and for the heavier weights the optional weight loader can fitted to the apparatus for ease in loading the piston. The weight loader can also be used as a hold back feature for materials which have a high flow rate.   Please be aware that this machine has no computer connectivity or file capture software functionality.Although the MFR value is not a fundamental property of the polymer, it does however, give an indication of the flow characteristics of the polymer and it has become one of the most widely used references for the quality control of polymers.Technical Specification  Technical Specification Digital Temperature Controller Large Twin Colour Display Easy Set Point Operation Temperature Accurate to +/- 0.1°C Temperature Range 0 to 400°C Temperature Resolution +/- 0.01°C Digital Timer - Large easy to read display Test Die, Piston & 2.16kg Test Weight supplied as standard Filling and cleaning tools included as standard Conforms to method A of the ASTM standard Count Range - 1 second to 99999 hours 59 seconds (8 character display) Electrical characteristics: 110v@60hz and 220v@50hz – fuse rating: 10amp   Optional Ancillaries Weight Loader Full Range of Test Weights Available from 1Kg to 21.6Kg Hastalloy cylinder liner, Piston and Die for corrosive materials

The basic meter consists of a freely suspended bladed rotor positioned axially in the flow stream with the flowing fluid pushing against the blades. The rotational speed of the turbine is proportional to the velocity of the fluid & hence truly represents the volume of the fluid flowing through meter. The rotation of turbine rotor generates electrical pulses in the pick off attached to flow meter housing.

• Weights: 2.16 kgs. and 5.0 kgs.
• Max. Temp.: 300 ° C

Melt Flow Index instrument measures the rate of extrusion of molten resins through a die of specified length and diameter under prescribed conditions of temperature, load, piston position. This instrument measures the rate of extrusion of molten resins through a die of specified length and diameter under prescribed conditions of temperature, load, piston position. Instrument with the following accessories are supplied : Digital Timer, Temp. Controller (PID), Piston, Barrel Cleaner, Orifice Cleaner Scoop,

• Test Options: Flow Function
• Application: Flow Tester
• Temperature Sensor: DVP-94Y
• Humidity Sensor: PFT-607Y
• Vane Lids: 316 s/s
• Width: 14 inch
• Load for Vertical Axis Compression: 7 kg - Accuracy +/-0.6% FSR
• Axial Speeds: 0.1 mm/second up to 5mm/second
• Trough Rotational Speeds: 1 revolution/hour (RPH) up to 5 RPH
• Temperature Sensing: -20 Deg C to 120 Deg C
• Humidity Sensing: 10% to 95% RH +/-5%