Flow Meter Dealers in Thane

• Accuracy: +/-0.5% of Actual Flow Rate (+/- 0.3%, +/-0.2% on request)
• Repeatability: +/- 0.2% F.S
• CERTIFICATIN: CE CERTIFIED
• METERINGTUBE: S.S 304
• ELECTRODE: S.S 316
• FLANGE: C.S.
• LINING: PTFE
• END CONNECTION: ASA150#Flanged as per B 16.5.
• MOUNTING: Inline
• MIN CONDUCTIVITY: 10 uS/cm
• MAX PROCESS TEMP.: 0-60 deg C Normally ( Higher Temperature Available)
• PRESSURERATING: 10 Bar ( Higher Pressuer Available)
• MAINSPOWER: 230 V AC 50Hz / 24 V DC
• ENCLOSURE M.O.C.: Cast Aluminum IP65Signal Amplifier Box
• CABLE ENTRY: PG-9 / PG-11
• FLOW UNIT: Selectable.
• EMPTY PIPEDETECTION: Available
• LOW CUTTOFF: Available
• Output: 4 – 20 Ma
• COMMUNICATION: RS 485 MODBUS
• DIRECTION: Suitable for Bi- Directional
• PROGRAMMING: Through Key/ Keypad on front facia.
• TERMINALS: Shock – Hazard – Protected screwless terminals.
• SIGNAL CONVERTOR: Integral / Remote (with 3 meterCable)
• INTERCHANGE ABILITY: Fully interchangeable with all sizes of flow sensors.
• POWERFAILURE MODE: Provision of RAM/PROM to store parameter entered and measured flow dataduring

Gas Flow Meter that we offer is manufactured using the latest techniques under the strict vigilance of experts. We are named among the renowned Manufacturers and Suppliers of Gas Flow Meter. We conduct stringent quality tests on Gas Flow Meter so as to ensure that only the defect-free product reaches the customers’ end. We have the capability to deliver retail as well as bulk orders for Gas Flow Meter within the stipulated time frame.

• Display: Digital
• Accuracy: + / - 1% OF SPAN
• Brand Name: Scientomech
• Application Media: Any Liquid
• Power Supply: 230 VAC
• Flange Size: 15 mm to 300 mm
• Electronics Enclosure: IP67
• Flow Range: 0.3 to 10 m/s

We are the leading manufacturers, exporters and supplier of this products.

• Brand Name: Burak Metering
• Material: Stainless Steel
• Power: 24 VDC, 2 AMP & 230 VAC
• Usage: Industrial
• Model Number: BR-4000-G
• Operating Temperature: -20 ... +120°C
• Packaging Type: Wooden Box
• Line Size: As per requirement
• Specialities: Accuracy
• Type: Turbine flow meter
• Accuracy: ± 1% of reading
• Country of Origin: India
• Display: Digital
• Analog Output: 4 - 20 mA, 3 – Wire Source output

• Type: Flow Transmitters
• Application: Flow Measurement in Industrial Applications
• Color: Blue
• Voltage: 230 V AC or 24 V DC
• Power Source: Electric
• Warranty: 1year
• operation current: Single Phase
• Automation Grade: Automatic
• Temperature Capacity: Medium Temperature, Up to 100 degree C
• Cpndition: New
• Country of Origin: India
• Output: 4 to 20 mA
• Meter Sizes: DN 10 up to DN 2000
• End Connections: Flanged Ends, Tri-Clover Ends, SMS type or, Wafer type.
• Outer Body Material: MS or, SS
• Liner Material: Soft or, Hard Rubber, PTFE, PFA or, Neoprene
• Electrode Material: Hastelloy C or, B, Titanium
• Velocity suitability: 0.5 up to 10 M/Sec.

Flow Meter transducer adapts to measure the liquid rate and total flow rate of low viscosity and for clear liquid. It can be widely used in the fields of petrol, chemical Industry Metallurgy , Scientific research for measuring or control. Several output display methods can be selected.

Digital Gas Flow Meter is based on the classical method viz. Soap film method. The instrument is automated by using Microcontroller which provides highly accurate measurement and direct digital read out of gas flow rate. The time required for the soap film to pass through a fixed known volume is measured. The soap film is sensed by IR sensors. When the soap film passes through the first sensor, it activates the timer of Microcontroller. The timer is stopped when the film crosses the second sensor. The flow rate is then calculated by Microcontroller and instantly displayed in ml/min. Where as DFM-05 DFM-06 are direct flow measurement based battery operated.   Features : » Direct Digital Readout» Digital Display of LED/LCD » Useful for measuring any gas flow rate specially for G.C. Analytical Instruments. » DFM-01, 02, 03 04 - Table Mounting (Soap Solution based)» DFM-05, DFM-06 - Portable (direct measurement)

The Digital Gas Flow Meter is based on the classical method viz. Soap film method. The instrument is automated by using Microcontroller which provides highly accurate Measurement and direct digital read out of gas flow rate. The time required for the soap film to pass through a fixed known volume is measured. The soap film is sensed by IR sensors. When the soap film passes through first sensor , it activates the timer of Microcontroller. Timer is stopped when the film crosses the second sensor. The flow rate is then calculated by Microcontroller and instantly. Salient Features: * Direct Digital Readout * Microcontroller Based * Digital Display of LED /LCD * Highly Accurate and fast readout * Useful for measuring any gas flow rate specially for G.C. & Analytical Instruments * Easy to Operate * Free of Operational & Human errors

• Type: Electromagnetic
• Material: MS. SS304. Ss316
• Size: 15NB to 600NB
• Warranty: 12 months

Pulse transmitter: the solid state pulse transmitter offered by our organization is provides fast and accurate signaling for remote indication, totalizing and data monitoring systems. The unit is mounted directly on the flow meter and is coupled to the meter's output shaft. The pulses generated by the pulse transmitter can be easily integrated to host of electronic control devices.

• Material: Cast Iron

• ASTM D1238: Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer Method A
• ASTM D2839: Standard Practice for Use of a Melt Index Strand for Determining Density of Polyet
• ASTM D3364: Standard Test Method for Flow Rates for Poly(Vinyl Chloride)
• ISO 1133: Plastics -- Determination of the melt mass-flow rate (MFR) and melt volume-flow ra

The manually operated test procedure is very simple to undertake. Molten Polymer is extruded through a closely controlled orifice (die)from the apparatus using pre set conditions of temperature and pressure produced by a dead weight system. The extruded polymer is cut off manually and is then weighed. Using the time interval to extrude the polymer its flow rate over 10 minutes can easily be determined, thus giving the Melt Flow Index (MFI) or Melt Mass Flow Rate (MFR) in g/10 min. By conducting a simple Density Test at test temperature on the same material using the same pre set conditions and a known piston travel distance the Melt Volume Rate (MVR) can also be determined.The 6MBA Melt Flow System is supplied as standard with a replaceable hardened steel cylinder liner, standard test die and piston along with 2.16 kg test load and cleaning ancillaries. The temperature controller used is a 16th DIN type and displays the current temperature and set point and is accurate to 0.1 deg C. A PT100 Platinum Resistance Thermometer is used to accurately control the temperature of the barrel. The maximum allowable temperature variation along the length of the cylinder liner is in accordance with ISO1133 International Test Standard. An integrated timer is also fitted to accurately time the extrusion of the material in seconds to enable you to calculate the Melt Mass Flow Rate (MFR). All documentation is supplied including a product user manual and a fully traceable calibration certificate.Optional weights can be supplied to cover all testing parameters to International Test standards and for the heavier weights the optional weight loader can fitted to the apparatus for ease in loading the piston. The weight loader can also be used as a hold back feature for materials which have a high flow rate.  The 6MBA is the basic model offered within the Ray-Ran Range of Melt Flow IndexersThe manually operated test procedure is very simple to undertake. Molten Polymer is extruded through a closely controlled orifice (die)from the apparatus using pre set conditions of temperature and pressure produced by a dead weight system. The extruded polymer is cut off manually and is then weighed. Using the time interval to extrude the polymer its flow rate over 10 minutes can easily be determined, thus giving the Melt Flow Index (MFI) or Melt Mass Flow Rate (MFR) in g/10 min. By conducting a simple Density Test at test temperature on the same material using the same pre set conditions and a known piston travel distance the Melt Volume Rate (MVR) can also be determined.The 6MBA Melt Flow System is supplied as standard with a replaceable hardened steel cylinder liner, standard test die and piston along with 2.16 kg test load and cleaning ancillaries. The temperature controller used is a 16th DIN type and displays the current temperature and set point and is accurate to 0.1 deg C. A PT100 Platinum Resistance Thermometer is used to accurately control the temperature of the barrel. The maximum allowable temperature variation along the length of the cylinder liner is in accordance with ISO1133 International Test Standard. An integrated timer is also fitted to accurately time the extrusion of the material in seconds to enable you to calculate the Melt Mass Flow Rate (MFR). All documentation is supplied including a product user manual and a fully traceable calibration certificate.Optional weights can be supplied to cover all testing parameters to International Test standards and for the heavier weights the optional weight loader can fitted to the apparatus for ease in loading the piston. The weight loader can also be used as a hold back feature for materials which have a high flow rate.   Please be aware that this machine has no computer connectivity or file capture software functionality.Although the MFR value is not a fundamental property of the polymer, it does however, give an indication of the flow characteristics of the polymer and it has become one of the most widely used references for the quality control of polymers.Technical Specification  Technical Specification Digital Temperature Controller Large Twin Colour Display Easy Set Point Operation Temperature Accurate to +/- 0.1°C Temperature Range 0 to 400°C Temperature Resolution +/- 0.01°C Digital Timer - Large easy to read display Test Die, Piston & 2.16kg Test Weight supplied as standard Filling and cleaning tools included as standard Conforms to method A of the ASTM standard Count Range - 1 second to 99999 hours 59 seconds (8 character display) Electrical characteristics: 110v@60hz and 220v@50hz – fuse rating: 10amp   Optional Ancillaries Weight Loader Full Range of Test Weights Available from 1Kg to 21.6Kg Hastalloy cylinder liner, Piston and Die for corrosive materials

We offer bpc flowmeter. Made for discriminating overseas & domestic customers who demand bpc flowmeters made from brass. Note: the single pipeline adaptor shown fitted to the bpc flowmeter in the illustration is sold separately.

• Weight: 150g
• Accuracy: +0.4 Ml/min Or 2.5 %
• Brand Name: PCI
• Size: 68 x 130 x 30 mm
• Model Name/Number: DFM 05
• Batteries: Yes
• Usage/Application: Laboratory
• Warranty: 1 Year
• Resolution: 0.1 ml/min
• Measure Range: 0 to 500ml/min

Mechanical volumetric flow-meter for private use, with Nutating-disc type chamber for deliveries to 120 min. lt can be installed for gravitational feeding'