Fluid Bed Dryer Dealers in Navghar Manikpur, Thane

In Fluid Bed Dryer, the material comes in close contact with the drying air at low temperature and for a short period and hence there are less chances of the physical and chemical properties of the productsmaterials changing during the process of drying as compared to Tray Dryer where the material is not in close contact with the Drying Air.

Fluid Bed Dryer is specifically designed for 2 bar pressure shocks. At Shashvath Fabricators and Engineers, we manufacture and supply the product across the globe from Thane, Maharashtra. We manufacture the product with various specifications to meet the needs of diverse clients. This dryer comes with a carrying capacity of 10kg, 30kg, 60kg, 120kg, 200kg and 250kg. We welcome bulk orders from our valued clients.   Operation : Due to induced draft created by specially designed heavy-duty fan, the atmospheric air is drawn through air filter The filtered air is then heated to the required temperature by electric steam radiator The hot air passes through the product container and the product is dried by air fluidization The air circulation is controlled by damper The filter bag prevents fine particles from carrying over to exhaust air stream.   Selection : Selection of capacity of fluid bed dryer depends upon bulk density, drying temperature and moisture contents of wet material to be dried In case of 120 kg model a batch of 145 kg wet material can be loaded provided the bulk density of the material is 0.6 kg. Lit. (approx) Pharmaceutical granules with 20-25% moisture can be dried in 30-45 minutes at 800 c approximately It holds a capacity of 10 kgs 30 kgs 60 kgs 120 kgs 200 kgs 250 kgs.

• Weight: 110KG
• Voltage: 220v,220V
• Condition: New
• Capacity Available: 5kg. to 500kgs

Fluid-Bed technology offers several advantages such as, no product lump formation/caking, no particle overheating/cooling, a well defined product residence time, uniform product quality, better energy economy due to lower specific heat requirements, etc. In 'Fluid-Bed' the material is suspended in an upward moving hot-air and the mass behaves like a boiling fluid after "Fluidization".

• Material: Stainless Steel
• Voltage: 220V
• Finishing: Polished
• Frequency: 50-60Hz
• Power: 5kW
• Power Source: Electric
• Automatic: Automatic

Design as per stringent cGMP requirements. Uniform drying with electric/steam heating All contact parts SS 316 and non-contact part SS 304 Intel air handling unit with filter Auto shaking system for filter bag Pneumatic sealing for product container Option PLC control and processor. 

• Weight: 100-500kg
• Color: Blue
• Voltage: 110V, 220V
• Power: 1-2kw, 10-12kw
• Application: Industrial Use
• Driven Type: Electric
• Automation Grade: Fully Automatic

The Fluid Bed Dryer manufactured by us is ideal for the rapid, even drying of chemical, pharmaceutical and food product. Our Fluid Bed Drying Machine is capable of drying materials in any forms be it, granular, powder or crystalline form. Our product precisely maintains moisture content up to 20% which is ideal for pharmaceutical and chemicals. The precision and easy operations of our machine make us the best Fluidized Bed Dryer Manufacturer and Fluid Bed Batch Dryers Exporter from India. Salient Features All contact parts are S.S. 316 as per GMP Standard. Uniform Drying at low temperature Intrinsically safe earthing system ensures complete elimination of static charge. 65% open perforated air distribution plates along with Dutch weave mesh. On line sampling Port. Fan motor unit & Filtration unit can be placed in remote areas. Heating mode electrical / steam / thermic fluid. Pneumatically operated inflatable seals provided for filter bag and product container sealing with pressure switches & FRL to ensure fail safe operation. Top mounted pneumatic cylinder (directly coupled ) for shaking (without wire rope system ). Minimum handling more Hygienic. 2.5kg. to 500kg. batch capacity. Top Spry Granulation Explosion relief disc. Safety Explosion vent. Explosion vent is provided with rupture disk. Positive Earthing Device. Ensures complete elimination of static charge. Solid Flow monitor To prevent the product losses due to rupture of filter bag. Application The fluid bed drying technique is ideal for the rapid, even drying of chemical, pharmaceutical and food product. The material may be in granular, powder or crystalline form. Normally an initial moisture content up to 20% is ideal but materials with higher initial moisture content can be dried successfully. Documentation Elicon Fluid Bed Dryer comes along with all documentation like DQ, IQ, OQ, and FAT as a part of standard procedure.

Buyers can rely on us for on-time and safe delivery as we are aided by modern transit facilities. Our storage facility is capacious to maintain large stock. So, clients are free to approach us for urgent and massive requirements.Salient Feature : 5 kg to 500kg batch capacity. Available in GMP and Non-GMP Model (MOC: SS316 / SS304 / M.S). Pre air filtration by 20 micron filters and secondary by 5 micron filters, Final air filtration through HEPA (0.3 micron) filters (Optional). Intrinsically safe earthing system ensures complete elimination of static charge. On-line Sampling Port for easy sampling during operation. Pneumatically operated inflatable seals provided for filter bag and product container sealing with pressure switches & FRL to ensure fail safe operation. Top mounted pneumatic cylinder (directly coupled) for shaking (without wire rope system). (Optional) Heating mode Electrical / Steam & Thermic Fluid. Flameproof Motor with FLP Push Button and Flameproof Control Panel. (Optional)

We bring forth advanced range of Fluid Bed Dryers. Our Fluid Bed Dryers are known for their advanced features. There is no moving part inside the drying chamber of Fluid Bed Dryer, which makes its service highly reliable and accurate. These Fluid Bed Dryers are suitable for drying of materials in granular, powder and crystalline form by maintaining the standard moisture content of 20%. Fluid Bed Dryers offered by us are precision engineered and easy to operate. The Fluid Bed Dryers have become the demand of Pharmaceutical and Chemical industry. Features CGMP constructionModular constructionSampling deviceDished bottom for easy washingFLP lamp on main shellPLC control systemProduct container tilting arrangementAuto pneumatic shaking arrangementButter fly valves at inlet air and outlet air ductVery versatile Process EquipmentOptional heating media: steam, thermo, hot water, electric, hot air generator on LPGAll contact parts are SS 316 & non contact parts are SS 304Blower can be installed outside of production area reduces audio levelAir preparation unit to be located outside of production to keep utility outside of production areaQuick change toggle clamps for sieveBag shaking with telescopic cylinder no wire rope avoids wire rope shreddingBowl sealing with inflatable gasketsFully automatic operation based on PLC control/ without PLC controlMinimum handling and hygienic Tilting & lifting device for product container for easy handling Availability Capacity : From 2.5kg to 500kgFLP models availableMOC SS 304/316/326lCGMP with documentationMultiple installation options available Safety Is Assured By Explosion VentPositive Earthing DeviceExplosion vent is provided with rapture diskEnsures complete elimination of static charges Documentation Fluid Bed Dryer comes along with all documentation like DQ, IQ, OQ, and FAT as a part of standard procedure

• Type: Fluid Bed Drying Equipment
• Packaging Details: As per customer requirements
• Supply Ability: 10 Unit/Units per Month
• Lead Time: As per customer requirements

Working Principle Air generated by the powerful blower is passed through a Fin tube radiator. The air which has now become hot is forced into the product container carries the product upward. This creates a very high fluidization effect, where each and every particle of the product comes into contact with the hot air. Due to this, heat transfer efficiency is increased and drying time is reduced considerably. The conventional method of drying products in Tray Dryers is rather Time Consuming & troublesome. They occupy large floor space. The product container shall have a Hollander weave mesh screen at the bottom. The container shall be mounted on a SS trolley with castor wheels which shall enable it to be moved around. The product container shall be lifted up to the SS 316 retaining chamber. It shall have an auto shaking device connected to the bags. All gaskets shall be of NeoPrene  Special Features of Vats & Vessels Fluid Bed Dryers Uniform & Rapid Drying. Occupies small Floor Space Absence of moving parts results in ease of maintenance. Capacity - 15 Kg. to 250 Kg Finger bag chamber with Fully automatic Bag Shaking Bucket type bottom chamber above ground level Pneumatic lifting & locking for product container with retarding chamber Fully automatic bag shaking Inlet-air filtration system with 0.3 micron Hepa filters Heating can be Electric Heating or Steam Heating Type.

semi automatic capsule filling machine, Tablet Punches & Dies

Pharmaceutical Machine, sugar syrup plant

v blenders ointment plant inline homogenizer, Pharmaceutical Machine