Gas Plants Dealers in Thane

A number of problems in Gas Chromatographic analysis are caused by impure gases, the gases used in the GC have to be pure and free form Oxygen Hydrocarbon and moisture as they are harmful to GC. The hydrocarbons present may give baseline noise and irreproducible results. Moisture and oxygen can strip phase, case excessive bleed thus damaging the GC column or shorten its span. Silent Features : Improves reproducibility of analysis. Reduce baseline noise , drift problems etc Increase column life preferably for polar & capillary columns Deliver better than UHP grade gasses Increase detector life & reduces flame problem Save costly gases through toggle valves & gas distribution panel. Benefits : * Compact design, wall mounted, powder coated * Deliver Ultra high pure (UHP) grade gases Filters are easily detachable * Suitable for 10 kg/cm2 inlet pressure & 7 kg/cm2 * Outletpressure Deliver Ultra high pure (UHP) grade gases. * 1/4" or 1/8" fittings & tubing���¢�¯�¿�½�¯�¿�½s for each line. * Custom made Gas filter station can be made as per order 1/4" or 1/8" fittings. * Gas Purification Panel is used in Gas Chromatograph for FID, TCD, ECD,ICP, MS, AAS.

Being the leading names in industry we are involved in offering a wide assortment of Two Way Manifold Valve. These are developed using superior quality material and latest technology as per the international standards and norms. Offered product is highly reckoned among our clients due to their superior quality and reliability. Moreover, we offer products at reasonable prices.

• Body Material: Stainless Steel
• Brand Name: PCI Analytics
• Finishing: Powder Coated
• Gas Requirements: N2 ,H2 , Zero Air ,Acetylene , He ,Hydrogen etc
• Pannel Dimension: 420x600x87 mm
• Net Weight: 14 kg
• Pressure Guage: 0 - 10 kg/ cm2
• Features: Filters are easily detachable, Compact Design, Wall Mounted,Reduce baseline noise, drift problems, etc. , Save costly gases through toggle valves gas distribution panel.

• Model: OX 300
• Product Type: ANALYSER
• Weight: 3KG

• Brand Name: Nitrotech
• Model Name: EC-55
• Power Supply: 220VAC +/- 10 %, 50Hz
• Response Time: 5 sec or less
• Temperature: 0 to 45 Degree C
• Humidity: 95 % RH Non-Condensing
• Measurement Gas Pressure: -5 -250 kPa
• Sample Gas Temperature: 0 -1400 Degree C

We are the leading manufacturers, exporters and supplier of this products.

We have gained a well-known position in this market by providing an extensive range of AAS Gas Purification. Our products are completed under strict industry rule in order to preserve their adherence to worldwide accepted norms. Our clients can be purchased at industry leading prices within the prearranged time frame. In addition to this, our products are highly applauded for their strength, rust resistance and best quality. Features : » Gas purification panel is used to remove the vapours impurities like Moisture, CO,       CO2, Hydrocarbon from N2O, Argon & Acetylene» Gas purification for AAs & ICP-MS is optional one can also used gas distribution       panel instead of gas purification panel.

The acetylene plants has been manufactured with Boschi - Italy designs & drawings and modified by experienced engineers to perfection. The acetylene plant is fully automatic and all the operations are performed automatically by pneumatically controlled valves along with highly accurate sensors and temperature controller imported from USA, Germany, Japan. Acetylene is generated as a result of the chemical reaction between the calcium carbide and water. The by-product calcium hydroxide is discharged automatically from the generator. Acetylene gas burns along with oxygen as a cutting & welding torch and it provides the highest temperature of any known oxygen gas mixture.

Liquid oxygen plant is very much a requirement these days. And not just any plant, there is a dire need for qualitative liquid oxygen plants today in the market. Our liquid oxygen plants are the best in meeting all the specifications and international guidelines to deliver the best performance as compared to the other liquid oxygen plants available in India. They are energy efficient and ensure maximum savings on your part by providing lower power consumption and low maintenance cost. Its expansion engine leads the liquid oxygen plant to have a trouble free operation increasing its working efficiency to the highest level.

• Application: Gas
• Feature: Long Life, Rust Proof
• Warranty: 1year
• Finish: Polished
• Material: Stainless Steel

The manifold is constructed out of ASTM A 106 Gr. B 20 NB seam-less carbon steel pipe with forged fittings and flanges of ASTMA grade. The manifold is supported on an angle iron which is firmly grouted to the floor. The manifold is fitted with manifold valves which are as per IS 3224. The manifold valves are used to connect the tonner in use or isolate the tonners which are not in use. The manifold is also provided with a pressure gauge with an isolating valve.

We offer bpc flowmeter. Made for discriminating overseas & domestic customers who demand bpc flowmeters made from brass. Note: the single pipeline adaptor shown fitted to the bpc flowmeter in the illustration is sold separately.

• Application: Bank, Hotel, Mall, Office, Room
• Automatic Grade: Automatic
• Capacity: 0-500 ml/min
• Condition: New
• Color: Athena Grey
• Power (W): 200 W
• Voltage (V): 230V
• Fluid Tank Capacity (l): 2 I
• Model Number: ATH-300
• Temperature (deg. Celsius): 5-45C
• Frequency (Hz): 50 Hz
• Gas Type: Hydrogen
• Hydrogen Purity: 99.999
• Dew Point (deg. Celsius): -75
• Fluid Consumption: 1 week
• Features: Precision functioning, Minimum maintenance, Durable

• Country of Origin: Made in India
• Gas Type: Nitrogen
• Usage/Application:  Fire Extinguisher
• Capacity: 1 kg/Ltr to 9 Kg/Ltr

Diverter Manifolds are used to re-direct the well fluids & gasses produced during well testing operations. The Diverter Manifolds are constructed out of Ball Valves selected as per Pressure Ratings. These Manifolds can be used with Sparklet Piping Package SPECIFICATIONS: Meets Requirements of NACE MR 0175 Working Pressure Ratings 1440 psi & 2160 psi Sizes 2”, 3”, 4”.

Hydrogen generators are designed to produce hydrogen decomposition of distilled water. Electronic Stability provides high stability to maintain pressure in the course of their work. Models 6.140, 10.140, 6.400, 10.400, 16.600 and 25.600 produce hydrogen, intended to supply the analytical instruments: gas chromatographs with fiery detectors, gas detectors and so on. D. Generators are two stages of cleaning: a separator and filters with a molecular sieve, prevent the release of moisture gas lines. The output indicator is set humidity. Models "OFS" have a higher purity of hydrogen produced, it can be used as a carrier gas chromatographic studies.Generators have four stage hydrogen purification: separator, condensed moisture dryers, filters, molecular sieve and a catalytic reactor, excluding the possibility of the presence of impurities of oxygen and release of moisture in the gas lines.The output indicator is set humidity.

Hemaki Lab Services offer portable Oxygen Analyzer are designed for accurate and reliable measurement of Oxygen in Air, Nitrogen, Argon, Hydrogen etc.  These portable oxygen analyzer are based on : Electro chemical Oxygen Sensors, and provide fast response.  They require no periodic maintenance like replacing electrodes or electrolyte and can be calibrated using ambient air or standard calibration gas.  A digital display provides direct percentage / readout.  The power Source is a 9V battery. low power consumption for long battery life. Model PGAOC –100  is an Oxygen Monitor for general applications.  low Oxygen set alarm facility which is usually preset to 19.0% intended for personal safety usage and warns if Oxygen level falls below acceptable to human system.

• Capacity: 5 Ton
• Material: MS
• Automation Grade: Automatic
• Type Of Plant: CO2 Liquefaction
• Efficiency: 64.8%
• Frequency: 50 Hz
• Usage/Application: Hydrogen Plants, Ammonia Plants, Corn-to-Ethanol Plants, and Breweries.