GAYTRI INDUSTRIALCORPORATION Wagle Estate, Thane, Maharashtra

Water Suction Hose Equivalent to IS 2482 of 1982 (Light) There are two types of Hoses in this specification, These hoses are used on Agricultural Pump Sets and other Water pumps.

In keeping with a policy of continual improvements in design, we reserve the right to alter the specification of the product features without notice. The product detail in this brochure should only be used for the process suggested and under the condition specified. If under consideration for a potentially dangerous applications consult our Technical Department.

PTFE is an ideal material for flexible hose, to which a wire over-braid is added for excellent pressure ratings. Such hose gives extremely long life because its innercore has outstanding resistance to steam, chemicals, solvent, heat, pressure impulses, flexing, vibration, and aging.

Water supply through the center of the hose reel. Oil resistant, antistatic rubber hose with working pressure 20 bar. Nozzle 200 LPM (95 gpm nozzle) foam eductor adjustable for 0 – 6% mixture of foam concentrate. 2” SST isolation valve. Water inlet 2” BSP female thread. 1:3 gearing device with hand crank. Foam tank stainless steel AISI 316L. Design Temp. 0 to 35 Degree C. Hose Reel of galvanized steel. Waterways can be made of gunmetal SS Cupro- nickel, Titanium grade 2. Working pressure 3- 10 Bar. Color – RAL 3000 red.

We are offering stainless steel high pressure corrugated hose is a kind of metallic hose.

Smooth Bore – Medium Pressure PTFE Hose to which a wire over-braid is added for excellent pressure ratings. Such hose gives extremely long life because its inner core has out-standing resistance to steam, chemicals, solvents, heat pressure impulses, flexing, vibration and aging.

Sand Shot Blasting & Cement Grouting Hose For cleaning and blasting of castings, metal, stone and concrete surface. Electrical continuity: Can be provided on request.

Sand & Gravel Hose (GSG) Extraction and transport of abrasive materials such as Sand, Gravel, Rock, Sludge, Powder, etc End Connection: Flanged type or as per Client's requirements

These hoses are used on High Pressure Water Pumps required in various project like irrigation, Coal Mines, Steel Plants, Railways Industries etc. Above 75mm, hoses can be supplied in longer lengths but not covered under I.S. specifications. These hoses are supplied with internal & external armour.

For high pressure hydraulic oils, fuel, lubricating oils, water and air.Swaged or Crimped or Reusable type Oil, Weather & Abrasion resistant, One braid of HTS Wire.

Rubber joints Greater Resistance to Shock, Natural Recovery From Movement, Both Axial and Lateral Deflection, No Flex-cracking with Age, No Electrolysis Problem, Better Insulation Against Vibration And Sound, No Gaskets Needed, Requires Less Space, Lighter Weight, Easier to Install, Higher Working Pressures, Longer Service Life, Require No Maintenance, Protecting piping and equipment systems from Stress Motion.

We are offering rubber hose as per bs 5122 & is 10655 83. This hose can be supplied also as per bs 796 or bs 924 type m.

Rubber Expansion Joint Spool type (single arch – double arch), Greater Resistance to Shock,Better Insulation Against Vibration And Sound, Protecting piping and equipment systems from Stress Motion.

Rubber lining shall be porosity, air-blisters and any other visible defects, Shall be either woven fabric well rubberized on both sides or braided textile reinforcement with yarn, natural or synthetic or combination of both, The outer cover shall be of high tensile abrasion resistant compound.

Shall be either woven fabric well rubberized on both sides or braided textile reinforcement with yarn, natural or synthetic or combination of both, These hoses are used for various applications like general construction work, road building, tunneling, in construction jobs used with chipping, grinding and riveting appliances; in Service type inflation, for rock drilling applications in mine, and quaries etc.

The adaptor when pushed into the coupler is securely held by the self locking arrangements resulting in a positive and leak proof connection. This action simultaneously opens the valve and fluid flow starts. To disconnect, pull back the sleeve of the coupler, the adaptor ejects out and the valve shuts off automatically. Valves are provided in GSV and GDV type.

PTFE Lined Composite Hose for further information please contact consult our technical department. Construction: Same as Composite Hose - Inside Layer shall be PTFE lined. End connections: As per customer requirement duly crimped.

Size (Inches) : :1" to 12"

We are offering ptfe corrugated transfer hose gtc. Corrugated transfer hose, is the most broadly applied general purpose work hose found in hundreds of chemical transfer and food handling situations. Its present applications are as diverse as water purification systems, mercury transfer lines, and food processing equipment.

PTFE Corrugated Transfer Hose in hundreds of chemical transfer and food handling situations. Its present applications are as diverse as water purification systems, mercury transfer lines, and food processing equipment.It has unusually high resistance to thermal cycling; therefore is used extensively in tire presses, laundry presses and other types of steam service where on-off operating cycles cause wide temperature fluctuations inside the hose.

Rubber lining shall be porosity, air-blisters and any other visible defects, Shall be either woven fabric well rubberized on both sides or braided textile reinforcement with yarn, natural or synthetic or combination of both,The outer cover shall be of high tensile abrasion resistant compound.

Size : 50 mm

These hoses are used for various applications like general construction work, road building, tunneling, in construction jobs used with chipping, grinding and riveting appliances; in Service type inflation, for rock drilling applications in mine, and quaries etc. IS: 4461980 (Amalgamated revision of IS : 446 1968 covering both textile woven and braided construction) or IS 911.

Size : 50 mm

Phosphoric Acid Suction & Discharge Hose high tensile textile fabric plies embedded with G.I. wire for suction & pressure loading, fitted with a rubber flange or with a rubber collar backing with steel flanges.

Petroleum hoses Loading and discharging of petroleum products aboard ship with an aromatic content. Integrally embedded spiral designed for pressure or vacuum. Above hose is suitable for petroleum and all other petroleum products with an aromatic content less than 50%. For Electrical continuity a braided copper wire is provided.

Specialities : Integrally embedded spiral designed for pressure or vacuum.

Metallic Expansion Joints of expansion joints. Each is designed to operate under a specific set of design conditions. Round and Rectangular Models are available.