Heating Coils Dealers in Thane

• Type: Coils
• Thickness: 10-20mm
• Length: 4-10mtr
• Application: Industrial
• Material: Metal
• Warranty: 1 Year

We are acknowledged Manufacturer and Supplier of Economiser Coils from Maharashtra, India. Our offered range of Economiser Coils is widely used in boilers and power plants to reduce energy consumption, preheating a fluids etc. Our Economiser Coils are compact in size and easy to install. These coils are available with us in varied sizes and specifications and also suit the budget of the buyer.

Heat transfer is based on conduction as well as on radiation principle, which not only improves the thermal efficiency but easy to assemble on nozzles as no pressure on heating surface is essential. Even unskilled operator can fit the heater with no risk of failure of the heater. Coil Type Nozzle Heaters are specially designed to prevent the failures of heaters against the leakage and contamination of plastic material at nozzle position. This heater can meet the higher temperature requirement prior to moulding at nozzle position. APPLICATION For heating the Nozzles of Injection Molding Machines.

Characteristics of our Inner Outer Sleeve Coil Heaters are easy mounting and variable heat distribution. Because of its direct touch and tolerance fit, the Inner Outer Sleeve Coil Heaters allow a very good heat transmission to the nozzle. The Coil Heating Element when used with the Inner & Outer Sleeves increases the maximum surface load capacity. In all our Inner Outer Sleeve Coil Heaters, the assembly of a thermocouple is possible to carry out a controlled temperature measurement. The Inner Outer Sleeve Coil Heaters are recommended for bigger diameters and power. The Inner and Outer Sleeves protect the Coil Heaters from Mechanical Damages. The Inner & Outer Sleeves can be delivered for a lot of Coil Heating Element dimensions. The Coil Heating Element is available with an option of using either Brass or Stainless Steel sleeves. The Coil Heating Element can be encased only on outer surface or both on the Outer & Inner Surfaces for more protection from Mechanical Damages.  

• Lenght L (mm) ± 3%: 250
• Heated Lenght (mm) ± 5%: 205

Microtubular coiled heaters are manufactured to a revolutionary design, which makes them the best choice in the most demanding conditions. The resistive wire is uniformly distributed in a compacted MgO insulation, with a CrNi-steel outer protection sheath. The heaters are annealed after manufacturing, thus acquiring a high malleability that allows their being subsequently bent into any complex shape, with extremely narrow bending radius. heaters are used in various applications, due to their being intrinsically reliable and highly versatile. They were first designed for a very specific application, the differential heating of plastic injection nozzles, and later become invaluable in the most diverse and demanding applications. Aerospace, railway, chemical, metalworking and food industry, glass and paper industry, automotive, packing, medical industry... all have taken advantage from the use of heaters, with their wide range of possible shapes and their fitness to an unlimited number of applications.

We manufacture and offer cooling or heating coils that are used in air handling units and fan coil units. The coils are manufactured from high quality copper tubes and aluminum fins. We use galvanized iron sheets aluminum to manufacture the frames of coils. We test the coils as per prevailing standard to ensure that they are safe to use and durable.

We are an eminent Manufacturer and Supplier of Steam Heating Coils. The Steam Heating Coils offered by us are manufactured in compliance with set industrial norms. Strict quality-tests ensure that only defect-free Coils reach the buyers.  In order to cater the bulk and urgent requirements of the buyers, we maintain a large stock of the Heating Coils in our state-of-the-art warehouse. One can obtain the quality approved Coils at market-leading rates from us.

Heating coils for fluid bed driers - ready to use heating coils for fluid bed driers of capacities of 60 kgshr, 100 kgshr, 120 kgshr, 180 kgshr, 200 kgshr. suitable for steam or thermic fluid oil heating. Ideal for conversions from electrically operated driers to steam heated or oil heated models.

application heaters are used in various applications, due to their being intrinsically reliable and highly versatile. They were first designed for a very specific application, the differential heating of plastic injection nozzles, and later become invaluable in the most diverse and demanding applications. Aerospace, railway, chemical, metalworking and food industry, glass and paper indus-try, automotive, packing, medical industry.. All have taken advantage from the use of heaters, with their wide range of possible shapes and their fitness to an unlimited number of applications. construction microtubular coiled heaters are manufactured to a revolutionary design, which makes them the best choice in the most demanding conditions. The resistive wire is uniformly distributed in a compacted mgo insulation, with a crni-steel outer protection sheath. The heaters are annealed after manufacturing, thus acquiring a high malleability that allows their being subsequently bent into any complex shape, with extremely narrow bending radius. features   a very wide contact surface results in exceptionally high levels of thermal conductivity towards the body that needs to be heated. optimal insulation results in very long life duration heavy-duty construction results in very high resistance to mechanical shocks operation temperature up to 700°c (1300°f) very low mass results in extremely low thermic inertia optional built-in thermocouple for high-resolution temperature measuring (j-type standard; k-type on request) unlimited range of possible shapes obtained from the straight heater heaters can be incorporated into brass or aluminium castings available in cross section 2.4mm x 4.2mm & 3.3mm x 3.3mm.

Coil Heaters: The versatile Lakshmiheaters Coil Heaters Micro tubular heaters can be formed into a variety of shapes to fit into many applications. Lakshmiheaters Manufacturers & Exports Coil Heaters, Injection molding heaters, Injection molding heating Elements, Coil heater elements, Mould heaters, Runner Heaters, Mini coil heaters, Cable heaters, Coil Heating Elements, Sprue Coil heater and Nozzle coil heaters.

steam boiler coil, Gas Fired Hot Water Generator

water heater stainless steel tube, Heaters, oil heaters

heater tube, Heaters, Industrial Oven

fin tube heat coils, freezers, Water Coolers, Condensers, Evaporators

Micro Tubular Coil Heater, Straight Rod Heater, Pencil Heater

Wire Wound Tube, wire wound oil coolers

hot water coil

finned cooling coils, pipe fitting special tube, speroidal graphite cast iron

Condensers, drain cooler, feedwater heaters, fresh water cooler