HVAC System Dealers in Thane West, Thane

Air handling units with heat recovery in the compact sound- and heat-insulated casing. Air capacity up to 106 m3/h. Heat recovery efficiency from 64 up to 76%.   Compact air supply and exhaust ventilation unit VUE 100 P mini is a simple and effective energy-saving solution ventilation of apartments, cottages, single-family houses, workshops and trade premises. The unit is a fully-featured ventilation unit that provides air cleaning, fresh air supply to the premise and removal of extract air from the premise. Extract air thermal energy is transferred to the cross-flow heat exchanger and is used to warm up the supply air flow. Built-in heat exchanger prevents heat losses and saves operating costs for heating in winter and air conditioning in summer. Due to the compact casing and silent operation the VUE 100 P mini unit can be installed behind suspended ceiling. The unit is designed for connection to 125 mm round air ducts. Several rooms may be ventilated if they are connected with air distribution network. Air flow regulation with A3 (P3-1-300) speed switch. Casing : The casing is made of corrosion-resistant alumozink and sound-insulated with 15 mm сellular polyethylene layer. For easy mounting the casing is fitted with mounting brackets. The detachable panel is swivel connected to the unit to provide fast and easy access to the casing internal components for servicing and maintenance. The unit is equipped with two backdraft dampers, one in the supply and the other in the exhaust air duct. Filter : Supply and extract air flows are purified through two filters with filtering class G4. The filters prevent dirt and dust ingress into the room and protect the unit components against contaminations. Fans : The unit is equipped with reliable supply and exhaust fans with forward curved blades that are powered by motors with low energy demand. The motor has maintenance-free ball bearings that ensure long service life about 40 000 hrs and are greased for the operation period.

• Usage/Application: Commercial
• Surface Treatment: Color Coated
• Material: FRP
• Brand Name: Pyramid
• Size: 1-1/2, to 5, 6, 8 inch

A simple, low cost way to move air, smoke, fumes and light materials. Air Amplifiers utilize the coanda effect, a basic principle of fluidics, to create air motion in their surroundings. Using a small amount of compressed air as their power source, Air Amplifiers pull in large volumes of surrounding air to produce high volume, high velocity outlet flows. Quiet, efficient Air Amplifiers will create output flows up to 25 times their consumption rate. Air Amplifiers have no moving parts, assuring maintenance-free operation. No electricity is required. Flow, vacuum and velocity are easy to control.

• Features: Pocket-friendly rates, Low maintenance, Damage free, Easy installation, Available in different sizes, High efficiency.

Suspended air handling units in heat- and sound-insulated casing with horizontal spigot orientation. Air capacity up to 220 m3/h, heat recovery efficiency up to 89 %. The suspended air handling units VUT2, VUE2 and VUTE2 200 P are the fully-featured ventilation units that ensure air filtration, fresh air supply and stale air extract. The model VUT2 ensures sensible heat recovery and the models VUE2 and VUTE2 ensure sensible heat and moisture recovery in two plate heat exchangers. The units are applied as components of ventilation and air conditioning networks for various premises. The units are featured with extremely low noise level due to the fans located between two heat exchangers. High heat recovery efficiency of the units meets the strict energy saving market demands. Compatible with round Ø125 mm air ducts. Modifications : VENTS VUT2 200 P –unit with two aluminium cross-flow heat exchangers. VENTS VUE2 200 P –unit with two cross-flow heat exchangers of polymerized cellulose. VENTS VUTE2 200 P –unit with two cross-flow heat exchangers (one made of polymerized cellulose and another made of aluminium). Casing : Made of aluzinc, internally filled with 10 mm cellular polypropylene heat- and sound-insulating layer. Filter : Supply and extract air flows are purified through two bag filters with filtering class G4. Fans : The unit is equipped with a supply and exhaust centrifugal fan with backward curved blades and integrated overheating protection thermostat with automatic restart. The motors and the impellers are dynamically balanced in two planes. Heat exchangers : The units incorporate two heat exchangers types: The aluminium heat exchangers are designed to ensure sensible heat energy transfer from extract to supply air flow. The heat exchangers are distinguished by long service life in a cold climate. The enthalpy polymerized cellulose heat exchanger are designed to recuperate sensible heat and latent energy contained in the extract air to warm up supply air flow. The heat exchangers are frostproof and produce no condensate. The units with such heat exchangers are recommended for use in air conditioned premises. The unit VUT2 200 P is equipped with two aluminium cross-flow heat exchangers with drain pans and heat exchanger freezing protection. The VUE2 200 P unit is equipped with two enthalpy polymerized cellulose counter-flow heat exchangers. The unit VUTE2 200 P is equipped with two cross-flow heat exchangers, one made of aluminium and another of polymerized cellulose. The unit has a drain pan to remove condensate from the aluminium heat exchanger. The unit is equipped with a switch that enables selection of one of three unit operation modes: standby mode, low speed (LOW) and medium speed (MED). The unit may be equipped with P3-1-300 switch that enables switching the unit on/off and setting one of three unit operation modes: low speed (LOW), medium speed (MED) and high speed (HIGH). The unit may be equipped with a CO2 sensor (not included into the delivery set). In case of high CO2 concentration it switches the unit to maximum (HIGH) speed. The unit may be equipped with A13 LCD control panel (not included into the delivery set) for turning the unit on/off, switching to low, medium and high speed as well as room temperature displaying. The integrated freezing protection system is designed to prevent the heat exchanger freezing at low temperatures. In case of freezing danger indication by the temperature sensor the supply fan is turned off to let warm extract air flow pass by the heat exchangers and warm them up. After freezing danger is no longer actual, the supply fan is turned on and the unit reverts to the standard operation mode. Mounting : The unit is designed for suspended ceiling mounting in balcony, storeroom, basement, attic and other auxiliary premises. The unit is also suitable for installation in major premises directly to the ceiling, behind the false ceiling or in the ceiling recess. Acess for servicing and cleaning through the bottom panel. The unit is suitable for wall mounting as well.

• Features: Durable finish standards , Trouble free performance , High efficiency.

• Feature: High performance,Trouble free service,Efficient functionality,Easy operation,Low maintenance

GI Corrugated duct, Rebar Coupler, pipe hangers, Threaded Rod

• Surface Finishing: Power Coated
• Color: Metallic
• Application: Busbars Use
• Shape: Rectangular, Round
• Material: Aluminium, Metal
• Type: Bus Duct
• Brand Name: Cpe
• Certification: ISO 9001:2008 Certified

All types of Busduct 

hvac systems

aluminum louver, Automatic Door, building glazing system

• Material: Aluminium
• Shape: Rectangular
• Application: Building
• Finishing: Polished
• Feature: Accurate Dimension, High Strength, Rust Proof, Unbreakable
• Max Working Pressure: 150 PSI
• Working Temperature: 1 to 60 deg C

A louver is provided in an area where mechanical equipment located inside the building requires ventilation or fresh air to operate. They can also serve as a means of allowing outside air to filter into the building to take advantage of favorable climatic conditions and minimize the usage of energy-consuming HVAC systems. Curtain wall systems can be adapted to accept most types of louver systems to maintain the same architectural sightlines and style while providing the necessary functionality.

• Type: Air Handling Unit
• Application: Industrial, Residentail
• Weight: 1000-2000kg, 2000-3000kg, 3000-4000kg, 4000-5000kg, 5000-6000kg, 6000-7000kg, 7000-8000kg, 8000-9000kg, 9000-10000kg
• Color: Black, Blue, Brown, Grey, Light Green, Light White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electric, Hydraulic, Mechanical, Pneumatic
• Warranty: 1year, 2years
•  :  

Air Handling Unit, Industrial Air Cooler, Ventilation Fan, Exhaust Fans

Bus Ducts, Apfc Panels, Battery, Battery Chargers, Distribution Boards

air handling systems, Reaction Vessels, product handling system

Airstream Fan Coil, Chiller Compressor Reciprocating Maintenance Service

Control Valve

data networking system, SPRINKLER SYSTEM

clean room modular system, Clean Room Doors, Stainless Steel Furniture