Hydraulic Machine Dealers in Thane

• Material: Stainless Steel
• Shape: Rectangular
• Color: Blue, Silver
• Technique: ERW
• Finsihing: Coated
• Driven Type: Hydraulic

Manifold blocks serve for transmission of hydraulic fluid from source to valves. Manifold blocks are used for easily realizing of hydraulic circuits without piping between valves and minimal overall dimensions. As per customer application with different criteria like; Type of ports Cavities Pressure rating Manifold Material Stainless Steel GGG40 Carbon steel ASTM A105 Material can be selected on basis of working pressure, working condition etc,. Type of Manifold Blocks Bar Manifolds Sub-plates Cover-plates Sandwich Plates Valve Adaptors Pump Manifolds Logic Manifolds

Striving hard to provide the best in class tube expansion systems; we are established as renowned Suppliers in the market. Customers' satisfaction is our utmost priority and thus, we deliver only certified array of products to them.

This range of test systems meets practically all the requirements of metals and composites testing for strength, durability and toughness. It is backed up with a wide choice of appropriate application software, transducers and accessories that satisfy the requirements of most standard test practices applicable to such tests. These accessories include room and elevated temperature testing of metals for tension and compression properties, low and high-cycle fatigue, fracture and fatigue crack growth, testing of composites under ambient and controlled environment for shear, tensioncompression and fatigue and testing of joints and fasteners for strength and durability under a wide range of loading conditions, including constant amplitude, programmed block loading and simulated service loading.

Our Hydraulic Trainer Kits are specially designed to give hand on experience of the function of each hydraulic unit. We are an unsurpassed Manufacturer and Supplier of Hydraulic Trainer Kits from Maharashtra. Hydraulic Trainer Kits we manufacture come with quick release connectors for easy looping. Bulk orders of the Trainer Kits are processed by us as per the specific requirements of buyers. We offer the Kits at reasonable rates.Features : Basic hydraulic circuits can be looped and understood System troubles can be observed and shoot Can be used as test stand for simple checks of the valves Specifications : 60 lit TAND x 1 HP motor x 6 LPM

• Material: Iron
• Capacity: 20-40 Ton
• Warranty: 2 Years
• Automatic Type: Automatic
• Type of Press: Pillar Press
• Voltage (volt): 440 or 220 v a/c
• Stroke: 300 mm
• Day Light Gap: 400 x 400 mm
• Max Force or Load (kilogram): 40 ton
• Number of Cylinders: Normally one

• Type: Press Tools
• Material: Mild Steel
• Application: Industrial
• Color: Black-grey
• Condition: New
• Finishing: Polished
• Country of Origin: India
• Brand Name: Ferro Oiltek Pvt. Ltd.

Ferro Cotton Bailing press is designed for compressing cotton of different grades. Geengineered friendly design to facilitate easy operation low power consumption and requiring minimum labor cost. Provision o proximity sensors, limits switches, check valves etc. Which helps in avoiding any accident. Ferro bailing press can be customized as per requirement under the side discretion of Ferro Oiltek. Ferro Bailing press comes with an advantage of multiple pushers as well as single pusher as per requirement of the customers. Parts of the press are standardized as per international standards. Extremely robust body structure provides zero vibration. Advanced PU Coat finish for easy cleaning, long lasting appeal and great aesthetics.

H Frame Hydraulic Press (Deep Drawing)     This H-frame hydraulic press is a deep drawing press that is similar in operation to our four-column hydraulic press but features a more compact design structure.   Main Features The H-frame hydraulic press is constructed from rigid high strength steel plates that help with precision power pressing during operation. The machine is fitted with a Siemens HMI screen and highly accurate position and pressure sensors. The hydraulic press features a user-friendly interface that allows compete user control for easy system adjustments. It is equipped with a hydraulic servo valve that allows the power press to run at high speeds and protects the system from impact forces. Monitoring software helps keep the sheet metal equipment operating at maximum capacity and helps keep the user and surrounding personnel safe at all times. The digital display shows operating cycle time, pressure settings, rem position, pressure release time, travel speed, travel setting, complete I/O information and safety alarms.   Specifications of the H-frame Hydraulic Press

• Type: Hydraulic Bar Cutting Machine
• Weight: 100-1000kg
• Color: Black, Brown, Grey
• Voltage: 220V, 380V, 440V
• Condition: New
• Rated Power: 1-3kw, 3-5kw, 5-7kw, 7-9kw, 9-12kw
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Driven Type: Hydraulic
• Warrenty: 2years
• Brand Name: Punishka Industries
• After-Sales Service Provided: YES

We are offering two types of hydraulic presses are available. Hand operated hydraulic presses and motorised hydraulic presses. these presses are all steel fabricated body construction hand or motorised hydraulic presses. Both presses suitable for embossing, pressing, drawing, broaching, straightening, bending, riveting, breaking, jointing, opening etc. These are provided with two stage hand pump and useful in all type of industries the low pressure pump is used for rapid advance of position at low pressure. the high pressure cylinder is provided with a bronze lining and is used for slow advance at high pressure. motorised models are supplied with suitable 440 volts 3 phase ac electric motor & starter.

We are a trustworthy name, involved in offering excellence in the form of Hydraulic Honed Tubes. We inspect each and every element of the raw material that that helps us in delivering qualitative products. Under the vigil supervision of professionals, we conduct quality examinations to ensure that the range is free from defects.

• Capacity: 50-100kg/h
• Finishing: Polished
• Width: 50mm, 60mm
• Machine Weight: 100-1000kg
• Packaging Type: Wooden Box
• Pressure: Low Pressure, Medium Pressure, High Pressure
• Power: 1-3kw

• Country of Origin: India
• Certification: ISI Certified
• Length: 1-1000mm
• Application: Construction, Marine Applications, Water Treatment Plant
• Feature: Corrosion Proof, Excellent Quality, Fine Finishing, Perfect Shape
• Finishing: Polished
• Dimension: 500-600mm

We are Thane(India) based entity and actively involved in offering nothing short of the best quality products in the market. Our pool of professionals keep close eye on the quality of the products so as to deliver the best in class range.   Details : A Complete Laboratory hydraulic press producing a force about 15 tones use to make high quality 13mm pallet used for IR/FTIR/XRF Solid Sampling 15 ton laboratory Hydraulic Pellet Press is a compact, elegant and robust machine, typically used by R&D & QC labs for various pelletizing applications for IR/XRF etc The high pressure pumping unit supplies hydraulic fluid to the up-stoking ram of the cylinder. This Causes the ram to raise steadily and positively in the upward direction. As a result pressure is applied on

Fully Automatic Hydraulic Vibro Press for Paver Blocks Complete with Electricals & Panel Board.   Details : 10 H.P. Hydraulic Motor. 2 Vibro Motors. Both layer Auto feed. Auto press & Ejection. Cycle time 9 to 10 seconds. Oil tank capacity 300 liters. Option of using single trolley. Safety Sensor Guard.

The BQ Series hydraulic tapping machine with T-slot work table/cart was suitable for use on the working range of 200mm – 1600mm, quick change safe clutch tap holder M3 – M30 to adapt your tapping work convenient & efficiently.   Features   Tap Size : M3 – M22 Parallel Arm T-Slot work Table 900x630mm, work cart Electric controlled device Optional device – 90 & various degree tapping device Table Mounting Column Hydraulic Tapping Spindle Choose any six safety clutch tapping adapters Electric motor, hydraulic pump & box

• Brand Name: O.S.INDUSTRIES
• Certification: BY O.S.INDUSTRIES
• Weight: 150 KG TO 2 TON
• Condition: NEW
• Raw Material: M.S
• Automatic Grade: FULLY AUTOMATION AND AS PER REQUIREMENT
• Power Source: ELECTRIC POWER PACK
• Warranty: 2 YEARS
• After-Sales Service Provided: YES
• Place of Origin: THANE

GM Hydraulic Press GM PP - Series that is appreciated by the clients for high quality standards and optimum performance. Manufactured and designed as per the latest technology, these can be used in Trans molding, vertical injection molding, rubber molding, FRP & DMC molding. Further, these can also be used in deep drawing application. While using this machine, the operator has access over the press from three sides of the press.  All the pillars act as bearing rods for the moving platen. The clients can avail these Hydraulic Press in capacities up to 3000 tons.Our presses one of different models as per the requirement of customers, such as Pillar type, gate type, deepdraw, C frame etc.   

4 ton Heavy Duty Hydraulic platform :With stainless steel cladding for copper manufacturing plant of Sterlite Industries. Duty Cycle continuous. Type : Mast Type , Capacity : 500 kgs , Max Platform Height (mm) : 3400 mm , Min Platform Height (mm) : 125 mm .

• Type: Butt Fusion Jointing Machine
• Color: red
• Condition: New
• Automatic Grade: Automatic
• Driven Type: Electric, Hydraulic

We are engaged in offering the Hydraulic Butt Fusion Jointing Machine. Our Hydraulic Butt Fusion Jointing Machine is a self-aligning machine. The Hydraulic Butt Fusion Jointing Machine is designed in accordance to the Indian and international correspondent standards reference 1624. The Hydraulic Butt Fusion Jointing Machine consists of a machine body with a rectangular frame, four clamps studs and wing nuts. Features Suitable for welding ducts for the transport of water, gas, drainage and other fluids under high pressure, up to dia 315 mm. Extractable mirror with digital temperature controller for reading the working temperature Size : 360 OD 90 mm height Construction Pipe Facing System: Electrex made ED-10 mm drill machine 1250 rpm, gear box 1: 20 chain, sprocket drive RPM 18, both side aluminum plate 20 mm thickness, on each side single cutting blade, single bearing type system. Power pack: Hydraulic power pack 5 HP single face motor with pump 7 Liters oil capacity tank Valves Poly hydron hand lever valve Flow control valve Pilot check valve Poly hydron pressure valve Pressure gauge 150 kg working pressure with complete arrangement

• Type: Automatic
• Certification: CE Certified
• Voltage: 380V
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1 Year
• Motor Power: 30 HP

Toggle presses are used for high compressive force, this is achieved by the toggle action, in which the force multiplies at the Bottom dead center (BDC ) of the Ram. In our model the operator can easily adjust the force by manual adjustment of the lead screw at the top. We have different models such as 250kgs, 500kgs & 800kgs.

• Automation Grade: Automatic
• Brand Name: PCI Analytics
• Usage/Application: compact design and easy to operate electical controls
• Frame Type: Box
• Filtration Capacity: 2000-3000 litres/hr
• No Of Plates: 10- 20

• Automation: Automatic
• Voltage: 415 V
• Shearing Material: GUILLOTINE PLATE
• Shearing Width: 6 Feet
• Model Name/Number: QC11Y
• Adjustable Rake: Yes

We are supplier of Hydraulic Guillotine Shearing Machine

We offer Hydraulic Press that produces a force about 15 tons ude to make high quality 13mm pallet used for IR/FTIR/XRF solid sampling. Our range of hydraulic press can be customized as per customer requirement. These are appreciated for precision functioning and durability. Features : » A complete Laboratory hydraulic press producing a force about 15 tones use to make high   quality 13 mm Pallet used for IR/FTIR/XRF Solid Sampling»15 ton laboratory Hydraulic Pellet Press is a compact, elegant and robust machine, typically   used by R&D & QC labs for various pelletizing application for IR/XRF etc.» The high pressure pumping unit supplies hydraulic fluid to the up-stroking ram of the cylinder.   This causes the ram to rise steadily and positively in the  upward direction. As a result, pressure is applied on any object placed between screw and   piston top plate.

BHARTIYA Electric Tube Expansion Drive Unit is governed by a separate Electric Control Panel which is adjusted by a simple Digital Display. When the Electrically Driven Motor reaches the desired Torque, the Control unit Mechanism automatically shuts off the Power and on pressing the Reverse Button the Tube Expander retracts out from the Tube. The Fully Automatic system ensures the Tube are rolled to maximum tightness without excessive cold worked stress in Tube Metal which prevents injuring Tube ends or distorting Tube Sheet Ligaments.

Double Die Hydraulic Paper plate making machine with Timer. It is very user friendly process, safer and Multi-purpose Mechanism.Double Die Hydraulic Paper plate making machine with Timer. It is very user friendly process, safer and Multi-purpose Mechanism with Switching Mode from manual to automatic and automatic to manual.