Hydraulic Presses Dealers in Thane

Striving hard to provide the best in class tube expansion systems; we are established as renowned Suppliers in the market. Customers' satisfaction is our utmost priority and thus, we deliver only certified array of products to them.

• Automation Grade: Automatic
• Brand Name: PCI Analytics
• Usage/Application: compact design and easy to operate electical controls
• Frame Type: Box
• Filtration Capacity: 2000-3000 litres/hr
• No Of Plates: 10- 20

We are offering two types of hydraulic presses are available. Hand operated hydraulic presses and motorised hydraulic presses. these presses are all steel fabricated body construction hand or motorised hydraulic presses. Both presses suitable for embossing, pressing, drawing, broaching, straightening, bending, riveting, breaking, jointing, opening etc. These are provided with two stage hand pump and useful in all type of industries the low pressure pump is used for rapid advance of position at low pressure. the high pressure cylinder is provided with a bronze lining and is used for slow advance at high pressure. motorised models are supplied with suitable 440 volts 3 phase ac electric motor & starter.

Hydraulic Power Press Paver Block Making Machine with Electricals & Panel Board." to "Fully  Automatic Hydraulic Press for paver Blocks Complete with Electricals & Panel Board.   Details : 10 H.P. Motor. Both layer Auto feed. Vibrator to Hopper. Auto press & Ejection. Cycle time 8 to 9 seconds. Hammering while pressing. Oil tank capacity 300 liters. Option of using single trolley. Holding while pressing. Safety sensor Guard

• Capacity: 50-100kg/h
• Finishing: Polished
• Width: 50mm, 60mm
• Machine Weight: 100-1000kg
• Packaging Type: Wooden Box
• Pressure: Low Pressure, Medium Pressure, High Pressure
• Power: 1-3kw

We manufactured the System for Tube Expansion which is controlled & operated by Electric Control Panel. Our tube expansion system is used for expansion of tubes of Boilers, Condensers & Heat Exchangers. Our tube expansion system is used mostly for tube expansion of condenser tube Expanders, heat exchanger tube expanders. Automatically controls after reaching the Required Torque by control is panel unit . By pressing the reverse button tube expander retracts out from the tube. The tubes are automatically rolled to maximum tightness without high stress of work in the Tube metal for prevention of damage to tube end or distorting ligaments of Tube Sheet. Our Tube Expansion system is suitable for tubes size (6.4 mm) ¼” to (100.4 mm) 4”

Four-Column Hydraulic Press HBP-500T/DDH.     Characteristics Adopt advanced Taiwan TWOWAY cartridge valve hydraulic circuit with little fault, minor reversing impact and high reliability. Oil cylinder is made of alloy cast steel with precision grinding, which ensures reliable performance in high pressure condition. Four columns are made of high strength alloy steel with hard chromium plated surface featuring good wear-resistance. The main hydraulic and electric parts adopt brand-name components from Japan, France, Germany and Taiwan, so the machine enjoys high reliable performance. The slide has fast speed and high productive efficiency. Designed with adjustable drawing speed, the machine is applicable for various thickness metalworking and deep drawing.   Security system Protective fence and the safety interlock to ensure the operation safety. Have a movable single-hand pedal switch. The entire equipment totally security (according to EN292:1994, EN60204:1994 and NR12) and defined as Level 4 of safety. Intrinsic hydraulic safety valve block with redundant control and dynamic monitoring carried out by a security interface. Right side protection: vertical door, pneumatic actuating, made of aluminium frame and polycarbonate transparate plates.   Applications Stretching/drawing and forming of metal sheets, such as tableware, kitchen utensils, metal shell of motor and electric appliance, lamp house and more. Shaping, stamping, drawing and edge cutting of metal and non-metal parts.

• Brand Name: O.S.INDUSTRIES
• Certification: BY O.S.INDUSTRIES
• Weight: 150 KG TO 2 TON
• Condition: NEW
• Raw Material: M.S
• Automatic Grade: FULLY AUTOMATION AND AS PER REQUIREMENT
• Power Source: ELECTRIC POWER PACK
• Warranty: 2 YEARS
• After-Sales Service Provided: YES
• Place of Origin: THANE

The major concern of our firm is to deliver a quality content, thus, we check the product quality on several counts at all stages. With the help of smart packaging system and a team of adroit professionals, we are offering customized packaging facility for the attainment of complete client contentment.

• Purity: 99% Purity
• Country of Origin: India

The Double box Bale press is mainly used for high capacity of bale priducts. Ferro Cotton Baling press is designed for compressing cotton of different grades. Ferro Double box bale press is provided with proximity sensors. linits switches, check valves to avoid an accident. Re-engineered friendly design to facilitate easy operation low opwer consumption and requiring minimum labor cost. Ferro Bailing press can be customized as per requiremnt under the side discretion of Ferro Oiltek. Parts of the press are standardized as per international standards. Extremely robust body structure provides zero vibration. Ferro press comes with a fully automatic design which reduces manpower required to operate the press. Ferro double box baling press comes with door less mechanism and high speed automatic revolvong boxes.

We are Thane(India) based entity and actively involved in offering nothing short of the best quality products in the market. Our pool of professionals keep close eye on the quality of the products so as to deliver the best in class range.   Details : A Complete Laboratory hydraulic press producing a force about 15 tones use to make high quality 13mm pallet used for IR/FTIR/XRF Solid Sampling 15 ton laboratory Hydraulic Pellet Press is a compact, elegant and robust machine, typically used by R&D & QC labs for various pelletizing applications for IR/XRF etc The high pressure pumping unit supplies hydraulic fluid to the up-stoking ram of the cylinder. This Causes the ram to raise steadily and positively in the upward direction. As a result pressure is applied on

GM Hydraulic Press GM PP - Series that is appreciated by the clients for high quality standards and optimum performance. Manufactured and designed as per the latest technology, these can be used in Trans molding, vertical injection molding, rubber molding, FRP & DMC molding. Further, these can also be used in deep drawing application. While using this machine, the operator has access over the press from three sides of the press.  All the pillars act as bearing rods for the moving platen. The clients can avail these Hydraulic Press in capacities up to 3000 tons.Our presses one of different models as per the requirement of customers, such as Pillar type, gate type, deepdraw, C frame etc.   

Toggle presses are used for high compressive force, this is achieved by the toggle action, in which the force multiplies at the Bottom dead center (BDC ) of the Ram. In our model the operator can easily adjust the force by manual adjustment of the lead screw at the top. We have different models such as 250kgs, 500kgs & 800kgs.

Compact, therefore easy to use inside boiler drums.Long life+low maintenance, Can be use for long working hours becouse drive is unaffected by heat

We are offering hydraulic press brakes. These hydraulic press brakes are assembled using strong unfinished material and unconventional technology. Features: features: > compact design > easy installation > dimensional accuracy > highly durable, etc. For more technical details please contact our technical team.

We offer Hydraulic Press that produces a force about 15 tons ude to make high quality 13mm pallet used for IR/FTIR/XRF solid sampling. Our range of hydraulic press can be customized as per customer requirement. These are appreciated for precision functioning and durability. Features : » A complete Laboratory hydraulic press producing a force about 15 tones use to make high   quality 13 mm Pallet used for IR/FTIR/XRF Solid Sampling»15 ton laboratory Hydraulic Pellet Press is a compact, elegant and robust machine, typically   used by R&D & QC labs for various pelletizing application for IR/XRF etc.» The high pressure pumping unit supplies hydraulic fluid to the up-stroking ram of the cylinder.   This causes the ram to rise steadily and positively in the  upward direction. As a result, pressure is applied on any object placed between screw and   piston top plate.

• Material: Iron
• Capacity: 20-40 Ton
• Warranty: 2 Years
• Automatic Type: Automatic
• Type of Press: Pillar Press
• Voltage (volt): 440 or 220 v a/c
• Stroke: 300 mm
• Day Light Gap: 400 x 400 mm
• Max Force or Load (kilogram): 40 ton
• Number of Cylinders: Normally one

• Type: Automatic
• Certification: CE Certified
• Voltage: 380V
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1 Year
• Motor Power: 30 HP

The hydraulic pump supplied with hydraulic drive incorporates the latest state of the technology resulting in a subcompact pump developing 100 bar pressure. The system is mounted on four wheels for on site manevourability. Expansion of tubes is regulated by adjusting pressure setting pump. Once required amount of wall thinning is achieved the drive trips automatically. Silent during use. In comparison electric and pneumatic tube expansion systems are noisy. Drive communicates with the pump via 9v DC remote control. This ensures safety & eliminates the need of electrical

BHARTIYA Electric Tube Expansion Drive Unit is governed by a separate Electric Control Panel which is adjusted by a simple Digital Display. When the Electrically Driven Motor reaches the desired Torque, the Control unit Mechanism automatically shuts off the Power and on pressing the Reverse Button the Tube Expander retracts out from the Tube. The Fully Automatic system ensures the Tube are rolled to maximum tightness without excessive cold worked stress in Tube Metal which prevents injuring Tube ends or distorting Tube Sheet Ligaments.  

We are the leading manufacturers, exporters and supplier of this products.

• Warranty: 12 Months
• Condition: New

We are pioneers in engineering high quality electrical tube expansion system. Our skilled and experienced team of experts design these products that comply to international quality standards. Heavy duty motors imported from Germany are used in these products for high-functionality.

• Material: Mild Steel
• Brand Name: Niksu Power Tools
• Usage/Application: Industrial
• Max Force Or Load: 30 Ton
• Frequency: 50 Hz
• Pipe Size: 1-1/2''OD
• Phase: Single Phase

• Material: Mild Steel
• Usage: Industrial
• Automation Grade: Semi Automatic
• Color: Green
• Automatic Type: Hydraulic
• Deals In: New Only

• Oil Tank Capacity(litres): 30
• Hydraulic oil: SAE 68
• Net Weight (Kgs): 80

The hydraulic pump supplied with hydraulic drive incorporates the latest state of the art of the art technology resulting in subcompact pump developing 100 bar pressure. The system is mounted on four wheels for on site manevourability. Expansion of tube is regulated by adjusting pressure setting on pump. Once required amount of wall thinning is achieved the drive trips automatically.

Fostered with enormous business understanding of this realm, we are involved in presenting a broad consignment of Hydraulic Press Machine.  Features: Optimum quality Impeccable finish Long lasting nature Sturdy We offer a complete range of precision hi-power hydraulic machinery, hydraulic press machinery, hydraulic press machines which are widely used in various industrial applications.

Fastest operating tool in the market, we supply the workhorse ideal for high production environments. With uses in Oil Coolers, Radiators, and other apparatus with small diameter tubes also, these expanders offered are widest in range available anywhere. We also supply Electric drives, controllers, stabilizers, transformers, telescopic shafts, quick change chucks, hoses, cables, spring balancers and adaptors. Systems are also available in hydraulically operated. Pneumatic Rolling Drives, Right angle rolling drives. The world's first Remote Control Operated Hydraulic Tube Expansion System.   Torque Controllers Rollings Drives Suspension Systems Accessories Voltage Stabilizers Pneumatic Rolling Motors Pneumatic Rolling Drives Right Angle Rolling Drives Hydraulic Tube Expansion Systems Hydraulic Tube Expansion Systems (Hydex) Hydraulic "Thrust' Tube Expansion Systems  

• Voltage: 24 v
• size: 3/4” to 4”

Hydrive - Hydraulic tube expansion system. Low noise level easy on operator’s ears, Best suited for boiler tube expansion inside drums, Accurate torque control by pressure setting on power pack, Safe in operation, 24 v control voltage, Smooth, Can expand from 34” to 4” O.D. inconjunction with 3 drives, Competitive prices.