Industrial Heaters Dealers in Thane

• Type: Four pass vertical coil type
• Temperature: 280° C and 340° C
• Temperature: 280° C and 340° C
• Capacity: 200 000 to 3000 000 kcal/h

Bracketed with the topmost Manufacturers & Suppliers in Maharashtra, India, we are committed to offer the best in line Industrial Heating Equipments. Designed and manufactured as per the industry standards, our Industrial Heating Equipments feature inclined longevity, reliable performance, reasonable prices and robust construction. Buyers are free to place orders; we guarantee to deliver the same within a given timeframe.

Anupam'sThe helical wound heating wire is made of a high temperature resistant NiCr alloy. And the insulation consists of superior grade of magnesium oxide (MgO). As the heaters are swadged, even at high sheath temperature they have excellent electrical insulation and a high heat transfer. To prevent the heater from moisture the connection ends are sealed with sealing components. Precise forming of the heater is required to fit properly into the groove in the mould. To ensure this fit normally use a template as an inspection tool in the forming process. This template can be custom supplied or manufactured by Anupam as per customer's design. Heaters are available in dia 6.5mm, 8mm, 8.5mm and square section of 6mm x 6mm or customize diameter. To manufacture Mould Tubular Heater it is necessary to have an accurate drawing showing all the center distance, Bending Radius and Degree APPPLICATION Hot Runner Manifolds  

• Power: 6-9kw

Heating Mantle offered finds usage in applying heat to containers and acts as an alternative to other forms of heated bath. In contrast to other heating devices like hotplates or Bunsen, these glassware containers can be placed in direct contact with heating mantle without substantially bringing an increase in the risk of glassware shattering as heating element of heating mantle comes insulated from container, thus preventing excessive temperature gradients.

High watt density split sheathed cartridge heaters uses less power, runs more efficiently and survives more that of cylindrical type conventional cartridge heaters. Due tornits elongation capability it clutches the mould when energized leaving no air gap and contractsrnwhen it cools down parting the following advantage.  maximizes heat transferrn easy maintenancern reduces the cost of operation

• Brand Name: Haico
• Housing Material: SS 304
• Color: White
• Condition: New
• Automatic Grade: Automatic, Fully Automatic, Semi Automatic
• Power: 1-3kw
• Power Source: Single Phase
• Power Supply: 220 V A.C. 50Hz
• Application: Laboratory
• Voltage: 220V
• Temperature Capacity: 50-100C
• Type: Water Bath Heater
• Weight: 10-0kg
• Heating Element: High Grade Kanthal Cartridge
• Installation: Table Top
• Warranty: 1year
• After-Sales Service Provided: Yes
• Country of Origin: India
• Energy source: Electric

We are a team of qualified and experienced Engineers and Technicians. We are pleased to inform you that we have successfully come out with a unique – FIRST TIME IN INDIA – special purpose Resistance Heating Machine which is very useful for Engineers’ File manufacturers. This machine is used in place of existing Gas Burners for heating the file ends before forging. The special design used in this machine helps to heat the job faster with considerable less current. Since the Time and Current is less, the electrical energy consumption, which is proportional to the time and square of current, is considerably reduced and hence the operation cost of this machine is negligible compared to gas heating. Apart from the financial benefits, this machine is absolutely Eco friendly compared to gas heating.   We have successfully established this heating system with three of the following leading file manufacturers in India. * M/s HURRY NOTH AND CO. PVT. LTD * M/s UNIQUE STAR ALLIANCE PVT * M/s INDIAN FILLES MANUFACTURING COMPANY LTD (GARDEX GROUP)   All of the above parties have removed the gas burners and have installed our heating machines in their forging plant. They are more than satisfied with the machine performance and the financial gain achieved after switching over to our heating machines.

Consideration :The power can be controlled by using thermocouple heaters with TRD temperature controllers, TSE thyristor switching units and other accessories.IR radiation panels can be assembled using mounting sheets MBO.The national safety regulations must be complied with for the respective application, for example, the IEC or EN standard 60519-1, Safety in electrical heating installations.Further information and safety instructions are mentioned in the mounting sheet, which is attached to each heater.Applications : Thermoforming Vacuum Forming Shrink Wrapping / Fitting Mold Heating Drying Applications Paint & Powder Industrial

• Type: Water Immersion Heaters
• Certification: ISO 9001:2008
• Weight: 10-0kg
• Voltage: 110V, 220V, 380V, 440V
• Condition: New
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Warranty: 1year
• Energy source: Electric
• Temperature Capacity: 100-150C, 150-200C, 25-50C, 50-100C
• Country of Origin: India
• Brand Name: COMMONWEALTH
• Application: WATER HEATING

Sternly packed and delivered safely to the customers' provided address and that too in the committed time span. We have hired expert warehousing personnel who keep a stringent check on the entire range of stored lot ensuring zero damage to the products till the final dispatch to the clients.

• Country of Origin: India
• Voltage: 220V
• Application: Industrial Use
• Power Source: Electric
• Phase: Three Phase
• Automatic Grade: Automatic
• Shape: Round
• Packaging Type: Carton Box
• Frequency: 50/60 Hz

Drum heaters of this type have an isolated heating element embedded in a glass fibre mat. Silicone coated drum heaters are suitable for steel drums, whereas polyester coatings at lower temperatures can be used for plastic containers. As these heaters are flexible and wrap around the container they are also called band heaters. Up to three band heaters can be applied to a standard 200 litre barrel. There is no additional insulation so heat is lost by radiation into the surrounding air and the surface temperatures can be hot enough to burn unprotected hands.

• Type: Solar
• Color: Multi Color
• Condition: New
• Warranty: 5years
• Weight: 10-100kg
• Application: Water Heating
• Automatic Grade: Semi Automatic
• Packaging: As per client requirement

• Voltage: 2 / 3 Ø X 415V ± 10%

Induction Heaters are designed to heat the Bearings and other shrink-fit components prior to mounting, using latest technology intelligent microcontroller based electronic controls. The life of Bearings and other torque transmitting steel components, which are shrunk-fit on shaft, may get cut short due to rough handling and faulty installation or mounting methods. This can be avoided by expanding them by induction heating for the purpose of mounting of the component.

Our clients can avail from us quality Cartridge Type Heaters that are made of SS 304 metal sheath and are filled with thermally conductive magnesium oxide (MgO). This ensures maximum thermal conductivity, high electrical resistance and better life. These heaters come in parallel coil design, which make it unique. The parallel coils of low watt density are utilized for making up the rated wattage, which results in uniform cartridge heating and eliminates the chances of total burn out. The cartridges are always factory sealed & tamper proof, and these cartridges can easily be replaced online without removing the heater body or taking a shutdown. We offer these heaters in two models - horizontal & vertical.

The wonders of solar energy are successfully showcased by Solar Water Heater, which we offer. This Solar Water Heater can quickly heat the water. Also, the size of this Solar Water Heater is compact and thus making it convenient to install. We have become a premium destination to get Efficient Solar Water Heater.

• Brand Name: SKI
• Voltage: 280 V
• Frequency: 50 Hz
• Phase: Single Phase
• Surface: Color Coated
• Usage: Drum Heating
• Capacity: 30 - 50 Drum/hour

• Brand Name: Blue Star
• Material: Steel
• Color: White
• Power Source: Electric
• Application: Industrial Use
• Voltage: 220V
• Phase: Single Phase
• Warranty: 1 Year
• Country of Origin: India

• Type: Automatic
• Surface Finishing: Polished
• Certificate: CE Certified
• Condition: New
• Warranty: 1 Year
• Weight: 100-200 kg

Design & Safety Heater Transfer Coil Made Out Of Seamless Pipe Sch-40 Low Flow Alarm & Safety Minimum Delta T Across The Heating Coil Robust Design Offers Trouble Free Working Smokeless Combustion Noise Free Working Quality Our thermic fluid heater and steam boiler has best quality of inputs like seamless pipes for coil, high tensile fasteners, stainless steel reflector shell. And other components are brought from best of brand like siemens, Bharat Bijlee, Finolex, English electric, Fenner, Indofoss. Thereby making these units very strong and long lasting

• Material: Metal
• Application: Industrial
• Resistivity: Rust Resistant
• Durability: Long Life
• Surface Finishing: Polished

The organization is involved in catering to the market with its qualitative array of Industrial Radiators. Ours is a well-recognized firm based in Thane(India) and appreciated for offering qualitative products and that too at the best market prices.

We are renowned Manufacturer, Exporter and Supplier of Hot Water Generator. Our clients appreciate Hot Water Generator for long service life and efficient performance. Our range of Hot Water Generator is available in different designs. Also, we specialize in delivering Hot Water Generator in customized specifications.

Located in Maharashtra, India, we are actively functioning as Exporter and Supplier of Solar Water Heater all over the nation and abroad. Ours is a Flat Plate Solar Water Heater that is eco-friendly having longer service life. We have always been the foremost choice of the buyers since we deliver even the bulk orders well in time. Our Solar Water Heater is purchasable at rock bottom prices.

• Country of Origin: India
• Size: Large, Customized Size
• Type: Electronic Warmer, Flexible Heater
• Certification: ISO 9001:2008, ISO 9001:2015
• Weight: Light Weight
• Color: Black, Brown
• Condition: New
• Driven Type: Electric
• Warranty: 1year
• Automation Grade: Automatic
• Feature: Brand

We are a team of qualified and experienced Engineers and Technicians. We are pleased to inform you that we have successfully come out with a unique – FIRST TIME IN INDIA – special purpose Resistance Heating Machine which is very useful for Engineers’ File manufacturers. This machine is used in place of existing Gas Burners for heating the file ends before forging. The special design used in this machine helps to heat the job faster with considerable less current. Since the Time and Current is less, the electrical energy consumption, which is proportional to the time and square of current, is considerably reduced and hence the operation cost of this machine is negligible compared to gas heating. Apart from the financial benefits, this machine is absolutely Eco friendly compared to gas heating       We have successfully established this heating system with three of the following leading file manufacturers in India. » M/s HURRY NOTH AND CO. PVT. LTD » M/s UNIQUE STAR ALLIANCE PVT » M/s INDIAN FILLES MANUFACTURING COMPANY LTD (GARDEX GROUP)       All of the above parties have removed the gas burners and have installed our heating machines in their forging plant. They are more than satisfied with the machine performance and the financial gain achieved after switching over to our heating machines