Industrial Hoses Dealers in Bhayandar, Thane

• Size: 1/2inch
• Material: Rubber
• Shape: Round
• Thickness: 8-10 mm
• Packaging Type: Packet
• Features: High Bond Strength, Durable, Anti Corrosive
• MOQ: As Per Customer Needs

• Brand Name: Samrat Polymers
• Material: Rubber
• Shape: Round
• Color: Black
• Specialities: Leakproof
• Size (Inches): Different Size and Thickness are Available

Features : Robust design High tensile strength Resistant to adverse conditions Accurate in dimension Superior flexibility

Braided Tubes are able to transport liquid or semi-liquid Raw Material at high temperatures by impulsion or suction, since their design can resist pressure or vacuum. It is recommended especially when a smaller bending radius is required.

• Color: Black, Blue , Red, Green
• Size: 1/2 inch, 3/4 inch, 1 inch, 2 inch, 3 inch
• Single Hose Length: 1m-6m, 6m-12m, 12m-20m, 20m-30m

We manufacture a wide a range of Silicone Transparent Tubes and Braided Hoses both Platinum and Peroxide Cured. These tubing are most idle for critical Pharmaceutical applications. Biomedical, Food and Beverage, Cosmetic Industries, Coffee Vending machines.JEP’s Peroxide cured Silicone Tubings have the following extensive features. Conforms to FDA 21 CFR 177.2600, Complies DMF accreditation # 28904. Conforms to USP class VI compliance. (biological compatibility) Temperature resistance from -80 TO +250˚c. Food, Pharma Grade Imported Silicone rubber. Suitable for Peristaltic Pump applications. Non reactive to body tissue and fluid. Indefinite shelf life. It does not support bacterial growth, non reactive to body tissues. Unaffected by most water soluble materials. Good resistance to oxidation, ozone and radiation. No taste or odor to critical streams. Manufactured under strict quality control, in accordance with DMF accreditation no. 28904 Widely used for the application like Peristaltic Pump, Medicinal fluid transfer, Vacine / Sterile products, Products filtration and Fermentation, Food and Beverage, Electrical and also for Shrink Tunnel. JEP’s Platinum Cured Silicone Tubes and Braided Hoses comes with a series of certification which includes Food Grade Certificate, USP Class VI, ISO 10993, German BfR XV, RoHAS compliance, France Arrete DU 25, dmf – 28904 and also TSE – BSE certificates.AvailabilityStandard sizes available from 1.0 to 100 mm ID. Tubes and Braided Hoses above 4” ID shall be manufactured on special request.

• Application: Radiator,Brake,Power Steering,Heater,Suction,Turbo Charger,Engine,Oil,Filter

The silicone tubing we offer are manufactured using qualitative material sourced from reliable vendors. These tubing find extensive application in various industries and have gained tremendous appreciation in the market for their host of qualitative features. These are available in different specifications and can be customized as per clients’ requirement. FEATURES:- Longer service life Low maintenance Seamless finish

We offer an exclusive range of Industrial Hose Pipe to our clients. Ranging from 1/4'' ID to 12'' ID in size to S S-304, 304L, 316 & 316L type, our Industrial Hose Pipe is available in different sizes, as per the customers’ specification. Made from high quality synthetic fiber, Industrial Hose Pipe is available in various lengths at width. Furthermore, our range of Industrial Hose Pipe is available at an incredibly affordable price. Specifications  : Suitable for wide temperature range (-270oC to700oC). Compensates for thermal expansion contraction in the piping system. High physical strength. Fire resistant. Moisture resistant. Longer life. Good corrosion characteristics. Resistant to abrasion, penetration and damage. Connects misaligned rigid piping absorbs or dampens vibration and similar equipment. A flexible and quick option for rigid piping in difficult locations

• Material: Silicone
• Working Pressure: Max - 6 bar and busting 18 bar
• Color: All Color, Transparent
• Features: Dimensional accuracy,Fine finish,Compact design
• Usage/Application: Water
• Length: min - 50 mtrs
• Size: 2 inch, 3 inch, 3/4 inch, 1 inch, 1/2 inch
• Size/Diameter: 1/2" , 3/4", 1",1.5", 2" ,2.5", 3" all

Thermocouple Sheathing are made out of silicon carbide and molybdenum disilicide and is used for immersion in aluminum bath for molten metal temperature control. These tubes can withstand temperature upto 1500 c and are used in degassing of non ferrous molten metals. These tubes are made in such a way that the molten metal will not be stick to it. Thermocouple sheaths are available from 8mm - 14 mm ID and 42 mm - 50 mm OD, with length upto 2 meters. Our Thermocouple Sheathing allow molten metal temperature to be controlled within one degree centigrade, thus reducing the rejection rates of coasting considerably Thermocouple sheathing requires corrosion resistance and high temperature strength without the use of elements that may poison the thermocouple. of our sic heating element is RADIANT SILICAHEATING ELEMENTS.

We are trusted Oil Seals Manufacturer and Supplier in Mumbai. The Oil Seals, we offer, are manufactured using well-tested raw material and are further tested at NABL accredited laboratories. The clients can avail the Oil Seals from us in varied specifications at the market leading price. Details In an Oil seal environment, there is shaft that is rotating inside a housing or bore. Because of the friction, there must be some clearance between the shaft & the bore. The function of the rotary seal / oil seal is to stop whatever fluid is inside from leaking out from the clearance. The oil seal may also be used to prevent outside material such as dirt from moving in the through the surface. "Dynamic sealing" is the relationship between the rotating shaft and the seal and is handled by the sealing element. A garter spring may used in the oil seal to increase the radial interference between the  oil seal lip and contact point on the shaft. In order to achieve this interference, the oil seal's ID must be slightly smaller than the diameter of the shaft. "Static sealing" is the relationship between the housing and the seal. In order to achieve this interference, the oil seal's OD must be slightly larger than the diameter of the housing or bore. An oil seal normally consists of three basic components: the sealing element, the metal case and the spring. The purpose of the sealing element is to stop the fluid from leaking between the shaft and housing. The metal case will give rigidity and strength to the seal while it is being held in the bore or recessed groove. The spring will help make the sealing element more effective. All materials must be selected depending on the environment in which the oil seal will function.

Because of its unique combination of Physical and chemical properties “Garflon” Tubings have many diversified applications. Both flexible and semi rigid grades are made out of Nylon Type 6 and Nylon Type 12. They are used for various applications such as automotive units, hydraulic lines pneumatic control systems, fuel lines for compressors and vacuum pumps etc. Garflon Nylon Tubings are available from 3 mm O.D. x 1.5 I.D. to 19 mm O.D. x 15 mm I.D.

• Brand Name: Alt-D-Ron
• Material: Rubber
• Usage: High Pressure Washer
• Color: Black
• Diameter: 1.4inch
• Model: HPS001
• Length: 9 m

• Color: Transparent
• Finishing: Polished
• Packaging Type: Roll
• Usage: Industrial Use
• Specialities: Perfect Finish
• Hose Length (mm): 5mm

Applications Pharmaceutical Processing. Powder & fluid transfer High Vacuum applications Load cell application. Food Processing. Bulk Transfer Biotechnology.     Key Features Having high burst pressure resistance compare to polyester braided hose. Having Antistatic properties to dissipate static electrical charge makes it suitable for highly volatile flammable fluid transfer Temp Range : -80 °C TO 210°C Available with SS 316 L Tri-clover end

We provide these tubes with international standards and specifications or as per customized specification. Usage: This tube ensures maximum protection against air and moisture permeating into the tube and contaminating the contents due to its barrier in the form of aluminum or plastic. 3, 5 and 7 layers of increasing protection can be made available.

Silicon Tube, Sponge, rubber moulding, rubber sleeving, Rubber

Because of its unique combination of Physical and chemical properties “Garflon” Tubings have many diversified applications. Both flexible and semi rigid grades are made out of Nylon Type 6 and Nylon Type 12. They are used for various applications such as automotive units, hydraulic lines pneumatic control systems, fuel lines for compressors and vacuum pumps etc. Garflon Nylon Tubings are available from 3 mm O.D. x 1.5 I.D. to 19 mm O.D. x 15 mm I.D. PROPERTIES Withstand high pressure 75 kg / cm (1060psi) to 150 kg / cm (2120 psi) varying as per wall thickness from 0.5 mm to 10 mm and the diameter. Low co-efficient of friction. Ease of installation Flexible Good dimensional stability Light in weight Good heat resistance Self-extinguishing Non toxic Good Chemical resistance   APPLICATIONS Automotive gasoline High pressure lubricant Refrigeration lines Air lines on pneumatic control systems Gaslines in various industries Fuel lines for petrol engines Beverage lines

• Brand Name: Vetus
• Weight: 0.36 kg/m
• Internal Diameter: 13 mm 1/2"
• External Diameter: 23 mm
• Maximum Pressure: 8 bar
• Bending Radius: 95 mm

We are regarded as a prominent manufacturer, exporter, and supplier of reliable corrugated hoses that exceptionally increase system efficiency. Keeping the varied requirements of the customers in mind, our corrugated hoses are offered as per customer’s specification. Our corrugated hose is made from quality raw material that provides it a durable performance. characteristics weather resistanthighly reliablegreat flexibilitylong lasting affordable rate finds application in heatersuctionturbo chargerengineoilfilter specification annular corrugated hoses and hose assembly as per bs: 6501 part (i) range: I /d 6 mm to 200 mm