Industrial Mixer Dealers in Vasai, Thane

• Material: Stainless Steel
• Shape: Cylinder Shape
• Application: Industrial
• Feature: Anti Corrosive, Durable
• Capacity: 100-1000ltr
• Pressure: 0-15bar
• Surface Finishing: Chemical Coated

We are one of the leading manufacturers and suppliers of Double Cone blenders in Maharashtra. Double blenders are commonly used in the chemical, pharma and food industries, and can effectively mix all densities of dry powders and granules to a fine homogeneous mass, using low shearing force. The slant of the double cone prevents dead spots, which usually occur in other double cone blenders. Made of high quality steel and built in a way so as to enable safe operation, the container rotates at a speed of 8 RPM, and can be customized as per our client’s requirement.   Construction And Operation The conical shape at both ends enables uniform mixing and easy discharge.All contact parts are made out of stainless 304 or 316 quality material, as required by customer. Maximum care has been taken to ensure safe operation of the unit.Manual rotating facility with hand wheel for inching.The same will be provided with ss cover & limit switch. ( In 200 Kgs. & above model ) Two nos. of safety road will be provided at back side. ( One LH side & one RH side ) Suitable size of butter fly valve at one end of the cone provided for material discharge & hole with openable cover provided at other end of the cone for material charging & cleaning.One shaft with 04 nos. of fixed buffels with mirror polished provided inside the cone.Cone will be mirror polished from the inside & outside & structure will be matt polished.All moving parts covered with SS304 covers. Safety guards made from SS304 pipes provided in front of the m/c with limit switch.Panel fabricated from SS304 material with facility of three phase indication, D.O.L. tarter, digital timer & Amp. Meter. As per customer requirement machine will be provided with left side drive or with right side drive.The conical shape at both ends enables uniform mixing and easy discharge. All contact parts are made out of SS304/316(as per customer requirement) quality material. Maximum care has been taken to ensure safe operation of the unit. Worm reduction gear use for speed reduction. Food grade rubber gasket will be used on both end of cone as well as in butterfly valve. Inside & outside of the cone will be polished to the mirror finished. General structure made out of SS304 and Polished to the matt / mirror finish (as required by you) in GMP Model. All safety guards & covers made out of SS304 in GMP Model. Hand wheel will be provided for manual tilting of cone.Safety guards provided with limit switch to not start the machine when safety guards are not in proper position.   Salient Features : Design is cGMP - Current Good Manufacturing Practices compliance All Product contact parts AISI 316 & non contact parts AISI 304. Double Cone shape product container for Ideal dry mixer for lubrication of granules and homogenization mixing of multiple batches in to single batch. Available Capacity model in octagonal blender 25 kg to 2500 kg batch size.. Enclosed rigid drive with reduction gear box and motor. "A" type rigid structure of the machine with two sides resting of product container. Product container having discharge with butterfly valve and man hole. Charging hole with hinged lid with seal for charging and cleaning. The product container rotates on sped 8 RPM. Safety reeling provided for rotating area of product container. Fixed baffles provided for lumps braking. Electric controls panel with cycle time.   Safety Features : Safety reeling with limit switch. Overload protection and emergency stop.   Optional Features : Charging Option : Loading & Unloading by Product container with Jacking trolley. Vacuum conveying system. Bin loading by hydraulic hoist. Rotary Intensifier with AC variable drive. AC Frequency variable drive for product container. PLC Controls with HMI touch screen, Flame proof motor and Push Button station. Inline milling and loading with vacuum transfer systems.   Applications of Double Blenders : Double Cone blenders can be designed to operate in both batch and continuous modes. Batch type blenders can be built up to capacities of 50 m3. The folloSFEg are the applications of the Blender : Blending large volumes of dry solids. Mixing of bulk drugs, chemicals, and cosmetic powders. Dry Blending of capsule formulations. Coating solid particles with small amounts of liquids to produce formulations.   Materials commonly blended in the ribbon blender are as follows : Pesticides and herbicides Animal feeds Pet foods Pharmaceuticals Fertilizers Plastic powders Chemicals Spice blends Dietary supplements Dried food products

• Warranty: 1 Year
• Voltage: 220V/380V
• Condition: New
• Dimension(L*W*H): 3080*1625*2453mm

Enlisted with the prominent names, we have a well-maintained set in Vasai-Virar(India) and cater to different markets. Our product is obtainable in risk-free and industrial grade packing material that make sure the goods are protected from damage and are delivered to buyers in unharmed conditions.

We make use of user-friendly interface that enables us to network and control the sorting, loading and unloading of all the finished products from a single location. By this, we make sure that the voluminous consignments are kept safely till the final send off. Consider our name for acquiring qualitative products in any quantity, safe and time-bound deliveries are what we ensure.Salient Features : The conical shape at both ends of Double Cone Blender enables uniform mixing and easy discharge. All contact parts are made out of stainless 304 or 316 quality material, as required by customer. Manual rotating facility with hand wheel for inching. Suitable size of butter fly valve at one end of the cone provided for material discharge & hole with openable cover provided at other end of the cone for material charging & cleaning. Worm reduction gear use for speed reduction. Capacity from 25 ltrs to 5000 ltrs.

• Weight: 5kg
• Voltage: 110V
• Application: Blending
• Automatic Grade: Semi Automatic
• Power: 1Kw, 500W
• Driven Type: Electric
• Feature: Durable, Easy To Use, Light Weight

Conta Blender is used mainly for blending of dry powders for capsule plant, for blending and homogenizing of dried granules for tablet production. Conta blender is latest CGMP concept with an emphasis on the dust free transfer of powders and granules at different stages from sizing / dispensing to compression / filling of tablets or capsules. The process involves collecting the sized granules in a container, wheeling it to the blender, engage the same with clamping system, lift and tumble for the pre-validated time in set number of rotation. These granules can be mixed and lubricated in this blender. Main advantage of this system is that it is totally dust free. Also another advantage is adaptability of this system to handle more than one size of containers. For example Conta blender designed for 600 liters container can also be used to handle 400 liters to 600 liters of container (For Granules weight from 160 to 250kg) this adaptability makes it a very useful machine for any tablet or capsule plant. Our highly acknowledged products make us the best Double Cone Blender Manufacturer and one of the major Pharmaceutical Cone Blender Exporters from Pune. Advantages Processing of different sizes of production in single equipment. Dust free operation in solid dosage processing area. No risk of defending on extended processing. Containerized transfer of processed material avoiding manual scooping. Safety Features The container locking arm has a proximity switch which prevents the drive to run unless the locking arm is proper locked. Unless the container is securely locked the drive won�t run. Entire working area of the blender is protected by a railing all around with a gate and single entry point for the bin in such a way that if the railing fencing is made to open the drive will stop immediately. Presence of the container in the lock area is sensed thus if container is not placed properly in the fork arm than sensor will not allow the blender to start. If blender stops due to powder shutdown than when you start it after resumption of powder the blender will run only for the remaining time and not total time. Brake motor arrangement for smooth operation. Documentation Documentation like DQ, IQ, OQ and FAT provided with the machine.

We are a renowned Double Cone Blender Manufacturer in India. Our Double Cone Blender is highly demanded for uniform mixing of dry powder and granulates. Our Double Cone Blenders are widely appreciated for high efficiency and versatility and are designed as per GMP model. Two third volume of our Double Cone Blender is filled to ensure proper mixing. These Double Cone Blenders are provided with advanced safety features like safety guards. Available In 5 kg to 1000 kg batch capacity Features Of Double Cone Blender All contact parts are made out of SS304/316(as per customer requirement) quality materialWorm reduction gear use for speed reductionHand wheel will be provided for manual tilting of coneInside & outside of the cone is polished to the mirror finishedAll safety guards & covers made out of SS304 in GMP ModelAll moving parts covered with SS304 coversEnclosed drive with Powerful Reduction gear box and motorGeneral structure made out of SS304 and Polished to the matt / mirror finish (as required by you) in GMP ModelAs per GMP standards with validation documentsOne shaft with 04 nos. of fixed buffels with mirror polished provided inside the coneFood grade rubber gasket will be used on both end of cone as well as in butterfly valveThe Double Cone Blender is an efficient and versatile machine for mixing dry powder and granules 304 or 316 quality material, as required by customerManual rotating facility with hand wheel for inching. The same will be provided with SS cover & limit switch. ( In 200 Kg & above model)Two nos. of safety road will be provided at back side. (One LH side & one RH side)Suitable size of butter fly valve at one end of the cone provided for material discharge & hole with openable cover provided at other end of the cone for material charging & cleaning Cone will be mirror polished from the inside & outside & structure will be matt polishedSafety guards made from SS304 pipes provided in front of the m/c with limit switchPanel fabricated from SS304 material with facility of three phase indication, D.O.L. tarter, digital timer & Amp. MeterAs per customer requirement machine will be provided with left side drive or with right side driveSafety guards provided with limit switch to not start the machine when safety guards are not in proper position Used In Pharmaceutical industryFood industryChemical industryCosmetic industry

Super pitch propellers accurately blended & formed having extra large pumping capacity with low power  investment. Special mixer duty motor featuring hollow shaft design. Simple- collect nut tightened with   standard spanners permits quick adjustments of shaft length. Vessel fixing clamp features unique   adjustment of the mixer angle. Optional accessories / attachments Clamping arrangement to the motor suitable for Tank fitting SS / MS Stand

• Feature: operate in both batch and continuous modes, built up to capacities of 50 m3
• APPLICATIONS: food and beverage processing industries, to produce infant food, flavorings, seasonings, dried food products

V Shaped Blender is commonly used for mixing, lubricating and blending Food Chemicals, Pharmaceutical products, cosmetics, ceramic and other material. Characterized with a “V Shape”, V Shaped Blender can split and simultaneously recombine the material in a tumbler. Working on the principle of blending and churning material V Shaped Blender offers sturdy construction. With adherence to quality, we are among the leading Manufacturers and Suppliers of V Shaped Blender.   Features : Optimal Design High Operational Efficiency Long-Term Functionality

• Warranty: 12 months
• Voltage: 415 V
• Capacity: 50 KG TO 1000 KG. BATCH
• Model Name/Number: UNIVERSAL
• Material: Stainless steel
• Power Source: Electric
• Frequency: 50 Hz
• Design Type: Customized
• Automation Grade: Semi-Automatic

Static Mixer, polypropylene fibreglass reinforced vessel

• Capacity: 25 Ltr. to 2500 Ltr.
• parts are made up of: SS-316/SS-304.

Planetary Mixer, as name suggests it has planetary type agitation pattern. The beaters rotate around itself as well as in circular path in the bowl; this enables faster and better mixing of materials at a considerably lesser time.Cylindrical bowl mounted on three castor wheels leads to easy loading and unloading. Bowl has torrispherical dished bottom covered by Jacket to operate on 1Kgcm2 steam pressure. It is provided with steam inlet-outlet and cold-water inlet and outlet connections with standard fittings like pressure gauge, vent cock, release valve and drain.

Jacketed Reactor

Mixing Machine, rotary roaster, Liquide filling machine, Sigma Mixer

Conta Blender, Lotion Manufacturing Plant, Fluid Bed Processing Plant

Double Cone Blender, ROTOCONE VACUUM DRYER

Ribbon Blenders, Chemical Plant, pharma machines, Sigma Mixer, Agitator

Ribbon Blender, Industrial Heat Exchanger, Industrial Chemical Reactor

We are offering latest products of Ribbon Blender for all age man & woman.

Blender, Capsule Polishing Cum Inspection Machine, Automatic Loader

Inline Mixer, Automatic Ointment Plant, Bowl Lifting & Tilting Device

Sigma Mixer, Planetary mixer, Evaporator, Blender, Distillation Unit

Static Mixer, Sealant

Solution Mixing Vessel, capsule loader machine, Gelatin Storage Tank

Conta Blender, RCVD Rotocone Vacuum Dryer, Starch Paste Kettle

Industrial Stirrer, Conveyor, Pressure Vessels, MOPS

Sigma Mixer, Fluid Bed Dryer, v blenders ointment plant inline homogenizer

magnetic mixer, Pre-Filled Syringe Filling Machine

Ribbon Blender, Industrial Conveyors, Construction Buckets