Infrared Heaters Dealers in Thane

• Total Length (mm): 212
• Heating Length (mm): 160
• Voltage (V): 240
• Wattage (W): 500

Short wave quartz infrared heaters Lamps are used in various industrial applications. It contains tungsten filament, helically wound, encased in quartz envelope. Tungsten as resistive element is capable of generating temperature in excess of 2750° C. Its response time is very rapid in 1 second it emits over 90% of IR energy. It is by products free & pollution free. Heat focus is very accurate due to compact and narrow diameter of IR tubes. Short wave IR element has maximum heating rate of 200Winch. The quartz envelope allows transmission of IR energy and protecting the filament from convective cooling and corrosion. Addition of small percentage of halogen gas in it not only increases life of emitter but also protects blackening of tube and depreciation on infrared energy. The rated life of short wave IR heater is around 5000 Hrs White ceramic coating gold coating Short wave IR heaters are also available with GoldCeramic coating, which reduces visible glare and energy loss. It acts as reflectors and raises infrared energy output compared to infrared heaters without coating. Ceramic coating Gold Coating is available to hold the lamp envelope which helps in stronger and efficient radiation in a specific direction. This type of coating eliminates the need for reflective mirrors, making it space-savvy and low cost alternative. The performance of white ceramic coating is much better than gold layer. Gold coating is much better than gold layer. Gold coating gradually disappears if temperature exceeds 350° C, but ceramic coating performs upto 950° C and lasts longer than the life of the lamp.

We are presenting the finest quality Medium Wave Infrared Heaters that do not require any kind of medium to travel such as air and water. We are a trusted Manufacturer, Exporter and Supplier of Medium Wave Infrared Heaters. These heaters are designed by our skilled and experienced professionals who make use of premium materials, which are procured from reliable vendors. Buyers are free to place bulk orders.   Features : Round tube emitters are available in milky and transparent types Practically no Heating-up or cooling-down time Low cost with high efficiency & process reliability High density radiation with tubes occupying much less space Insulated Connection terminals   Descriptions : Quartz Infrared Tubes are available in varying dia. of 8, 10 , 12 & 15mm & in lengths from 300 to 1500mm in different designs & requirements Also available in other dimensions as per request. To be used only in Horizontal position and the mounting support should be located in Non-Heating ends   Applications : Medical Equipment - Incubator IR Conveyorised Preheating Systems Paperboard Coating and Drying Powder Coating Paint baking Screen Print Drying Lamination Heating in Vacuum   Ordering Information :  Total length in mm Heating length in mm Wattage

Elstein SHTS super high temperature heaters were developed to increase the previous maximum possible surface rating of ceramic panel heaters from 64 kW/ m² to 77 kW/ m².The SHTS heaters, produced using the hollow casting ceramic process, are filled with thermal insulation material and have a special black glaze and a gold-plated back. At an operating temperature of 900 °C, over 75 % of the electrical energy supplied is transferred to the material to be heated as medium to long-wave IR radiation.Consideration :The power can be controlled by using thermocouple heaters with TRD temperature controllers, TSE thyristor switching units and other accessories.IR radiation panels can be assembled using REO reflectors, REF construction sets, EBI and EBF construction elements, BSI and BSH panels as well as mounting sheets MBO.The national safety regulations must be complied with for the respective application, for example, the IEC or EN standard 60519-1, Safety in electrical heating installations.Further information and safety instructions are mentioned in the mounting sheet, which is attached to each heater.

Gold plating is done on quartz tube over 180°. These heaters reflect the radiant energy through the opening area only, improving element efficiency by as much as 20% compare to without gold plating heater. Energy cost savings are realized. Reflectors are often not needed. Surrounding work area tempratures are cooler. These heaters are also available with a without gold plating.

• Brand Name: Diligent
• Voltage: 230 V
• Frequency: 50 - 60 Hz
• Phase: Single
• Size: 212 - 1600 mm(Length)
• Power(Watts): 500 - 6000 W Approx
• Usage: Industrial

QUARTZ GLASS The quartz glass is very pure and provides good transmission and temperature resistance TWIN TUBE The unique twin tube design offers high radiation power and very good mechanical stability allowing emitters of lengths up to 3.5 meters. Emitters are available in Short Wove, Medium Wave, or Long Wave versions. That gives you the possibili-ty to select the optimum wavelength for the material to bo hooted. Dimensions and filaments are matched to requirements. GOLD/ WHITE COATED Twin Tube Infrared Heater is made by virtue of a gold & white coated which con emit heat directly to the product. A coat-ing on the infrared emitters reflects the infrared radiation. Consequently the infrared radiation impinging on the product is virtually doubled. FEATURES Infrared heaters can be matched to material characteristics - following higher process speeds and less energy consumption Directed heat only where needed Infrared ovens needs less space Non contact or medium needed Short response times of infrared heaters for switch on / switch off

• Full Length: 245mm

Our Ceramic Infrared Heaters are designed to produce maximum output in form of heat energy. They are constructed by a firmly burnt-in heating coil. The heater incorporates highly heatproof resistance wire that provides safety against much damage. We supply Custom Wattage Ceramic Infrared Heaters as per the requirement of our clients. Our Ceramic Infrared Heaters are designed to produce maximum output in form of heat energy. They are constructed by a firmly burnt-in heating coil. The heater incorporates highly heatproof resistance wire that provides safety against much damage. We supply Custom Wattage Ceramic Infrared Heaters as per the requirement of our clients.

• Features: As the coil is embedded in ceramic material, it can be installed in any possible position.

This is a special type of infrared heater with color-changing feature. Along with a change is temperature the heater changes its color. This is helpful to the users in a sense that there is a visible indication of the level of temperature reached at any given point of time.Where there are large IR Heating Panels with hundreds of heaters installed, it is possible and very easy to determine the non-working heaters just by looking at the color of each heater.

• Type Length: Full Length
• Width: 248mm 63mm
• Power Rating*: 250 to 1000W

Our medium wave infrared heating modules are configured with a resistance wire, which is enclosed in a Quartz Tube of 8mm outer diameter. The quartz tubes are placed parallel to each other and are mounted in a special housing. The size of this heater is such that they can replace Ceramic Infrared Heater.

Ceramic Infrared Heaters.The Lakshmiheaters Ceramic infrared heaters consist of a ceramic body, which is filled with highly efficient heat insulation material. The heating coil is burnt into the ribs of the radiation area. The high quality heat insulation ceramic material introduced into the backside of the radiation element reduces the temperature in the wiring space. Heat loss on Non-radiant side is very little due to special design of ceramic layers. Crystal clear white or yellow glazing is done to help good radiation and the elements emit energy in the range of 5-10 UM. By using life prolonger in Ceramics, Element life is increased. The heat up curves for radiation elements with various power rating is shown in the diagram. The Elements are designed to withstand sudden voltage fluctuations.   Lakshmiheaters Manufacturers & Exports CIR Infrared Heaters, Ceramic Infrared heaters, Ceramic Infrared Heating Elements, Industrial Infrared heating, Energy Efficient Infrared Heaters, Quartz Infrared heaters, Short Wave Infrared heaters, Medium Wave Infrared heaters, Infrared heating Modules, Infrared heating panels, Quartz Space heater, Twin Tube Medium Wave Infrared heaters and Quartz Infrared heater Elements.   Application : Heaters for Thermoforming & Vacuum Forming Machines Heaters for Plastic forming Machines Heaters for Shrink packaging tunnels Heaters for Lamination/ lamination Machines Curing rubber heaters Drying textiles heaters Heaters for Drying lacquers and paints

• Brand Name: Diligent
• Voltage: 230 V
• Frequency: 50 - 60 Hz
• Phase: Single
• Application: Industrial
• Size: 212 - 1600 mm(Length)
• Power(Watts): 500 - 6000 W Approx

Heating Burners are swivelled and raised up-down by means of a gearbox and a Screw Jack respectively. Compact plant is designed to cater the requirement. The whole assembly can be raised or lowered up/down and also individual burners can be tilted and/or moved in linear manner as and when required.  

• Power: 650 W
• Voltage: 220-230 V
• Wavelengths: 2-10 micron
• Weight: 150 gm
• Dimensions: 6 x 24.5 x 4.5 cm
• Operating Temperature: -55 Deg C up to +350 Deg C
• Maximum Effective Temperature: Up to 550 Deg C

Electric Water Heaters, Tilting Furnace, nitriding furnace

Quartz Burner, carbon heater, Quartz Glass Tube, quartz glass plate