International Industrial Springs Wagle Estate, Thane, Maharashtra

IIS makes all types of wave Spring washers as per DIN 137 & DIN 6904. IIS Wave washers are made from prime quality spring steel, stainless steel, copper and other material which are readily available in very standard sizes. Wave washers are wavy metal washers designed to offer a compensating spring force and maintain a load or take up shock. These are the disc of irregular shape formed in such a way that when loaded it deflects, acts like a spring, and provides a preload between two surfaces. Wave washers are very useful for limited radial space and moderate thrust load e.g. Axial loading of Ball bearing. The number of waves can be two, three or more. The spring rate is proportional to the number of waves raised to the fourth power. Wave Washers are generally preferred as cushion spacers between parts on shafts or to take up the probable deviation in assembled parts. These are positioned underneath a nut, an axle bearing or a joint to reduce friction, avoid leakage, isolate, stop loosening or distribute pressure. IIS has ready stock of all the sizes.

Buyers can order our products in bulk, as we maintain year around availability. In addition, we have reliable transportation system to make timely delivery. Our range is manufactured strictly as per the globally accepted norms, thus, you can rely on us completely.

Backed by a productive network, our company is able to cater to buyers all over Maharashtra(India) and other Maharashtra(India)s with ease. If you are interested in obtaining Torsion Springs at market leading prices, we are its responsible and responsive suppliers.   Torsion Springs resist external torque with angularly deflecting ends. Contrary to its name, the wire is subjected to bending stress and not torsional stress. These are close wound springs. After deflection, the body length increases and coil diameter reduces.InstallationSpring load and deflection largely depend on the type of end and installation. Every torsion spring will have two points of contact at the end and one at the arbor. While designing, the position of the contact points and their relative position should be made clear.    Types of EndsA great care must be taken while deciding spring ends as different types of ends and special end forming result in higher cost and frequent tool change.IIS can manufacturer torsion springs with all types of ends and sizes. Please send us your requirement and we will be free to help you.

We will not let you wait much, as we have trustworthy shipping facilities available to deliver the same in set time. We are the most promising name when it comes to Torsion spring.

IIS Manufactures & Supplies Torsion Spring   TORSION SPRINGSTorsion Springs resist external torque with angularly deflecting ends. Contrary to its name, the wire is subjected to bending stress and not torsional stress. These are close wound springs. After deflection, the body length increases and coil diameter reduces.   InstallationSpring load and deflection largely depend on the type of end and installation. Every torsion spring will have two points of contact at the end and one at the arbor. While designing, the position of the contact points and their relative position should be made clear. Types of EndsA great care must be taken while deciding spring ends as different types of ends and special end forming result in higher cost and frequent tool change.Spring Materials - Common spring materials include stainless steel, alloy steels, carbon steels and some non-ferrous materials. IIS also produces spring from Exotic material like Inconel X-750, Inconel 718, Nimonic 90, Monel, Nimonic, Hastelloy, Beryllium copper etc.Spring design – IIS can design torsion springs for you depending on your application, space and torque requirement. IIS can manufacturer torsion springs with all types of ends and sizes. Please send us your requirement and we will be free to help you.Surface coating – IIS offer a variety of coating on springs like Mechanical Zinc plating, Zinc Electro plating, Nickel Plating, Electrolysis Nickel plating, Geomet, Daromet coating, Cadmium plating, Powder coating, Epoxy painting etc. 

We are manufacturing Serrated Lock Washer external & internal according DIN 6797 & Customer requirements .The external serrated lock washer (Type A) -The teeth at the outer diameter of the washer which supports to lock more area to reduce loosening.The internal serrated lock washer (Type J)-The teeth at the inner diameter of the washer which is use for bolt or screw tightening.

With our excellence in this field, we share forefront for supplying world-class array of products from Thane (India). We are staffed with professionals and under their guidance; we keep a close check on the products and ensure that the range is as per the exact customers' requirements.   More About Information of Tension Spring : Tension Springs Also known as Extension Springs are helical wound Coil springs, usually designed with hooks, loops or end coils. The main use of a Tension spring is to absorb or store Energy along with creating a resistance to the pulling force, the Spring gets Stretched as the Load is applied to it. IIS Manufactures Tension Springs starting from 0.2mm wire diameter to 20mm wire diameter, OD up to 300mm and length 2000mm.

IIS Manufactures & Supplies Tension Spring as per DIN 2095 & IS 7906 Introduction Tension Springs Also known as Extension Springs are helical wound Coil springs usually designed with hooks, loops or end coils. The main use of a Tension spring is to absorb or store Energy along with creating a resistance to the pulling force, the Spring gets Stretched as the Load is applied to it. IIS Manufactures Tension Springs starting from 0.2mm wire diameter to 20mm wire diameter , OD up to 300mm and length 2000mm. Spring Materials Common spring materials include stainless steel, alloy steels, carbon steels and some non-ferrous materials. IIS also produces spring from Exotic material like Inconel X-750, Inconel 718, Nimonic 90, Monel, Nimonic, Hastelloy, Beryllium copper etc. Tolerances are as per IS 7906 or DIN 2095 Surface coating IIS offer a variety of coating on springs like Mechanical Zinc plating, Zinc Electro plating, Nickel Plating, Electrolesss Nickel plating, Geomet, Daromet coating, Cadmium plating, Powder coating, Epoxy painting  etc.

Shim & Support Rings DIN 988 Shim rings are developed to avoid machine components dynamic axially. The commonly application of shim ring to adjust the clearance or space between two parts. Support rings are used to ensure that do not deform when part to extreme dynamic axial load. MaterialShim ring - Mild Steel Support ring - Spring Steel We provide Shim ring in other material also. Surface FinishShim ring - Oiled Support ring - Oiled or PhosphatedHardnessSupport ring - 440 -500 HV10.

E-Clip DIN 6799we are Manufactures and supplies of E-Clips with high end quality metals and precision machine. Quality such as high strength, perfect finish, excellent durability owing attributes durability. These are easily available at leading market prices. The most common Application is of radially fitted Circlips for shafts with grooves which provide a large shoulder on a relatively small shaft diameter.Material : Carbon Spring steel ( DIN17222 / EN10132-4 ) Carbon Spring steel Hardened and Tempered Stainless Steel 301 / 304 Inconel X 750 and X718 Surface Finish Phosphate ( IS 3618 ) Electro Zinc Plating ( IS 1573 ) Mechanical Zinc Plating (ASTM B695) Polish Finish for Stainless Steel Natural Finish   Stock All STD Sizes are available.

Made of SS, Circlips are available in all types of circlip, such as e-clips, retaining ring, washer, and material according to din. In order to suit varied requirements of the clients, we have developed a secure payment procedure that have assorted offline and online options. We have our own storage unit wherein we keep a large stock for meeting urgent and massive requirements of the clients. Laced with modern amenities, this unit keeps the lot free from the damaging factors.

Material : SS

Usage : Industrial, Garage

Wire Diameter : 3.62 Inch

We are identified as one of the commendable names in the market offering Slotted Type Ball Bearing Washer (Disc Spring for Pre loaded Ball Bearing - Slotted) at affordable prices. We are a reckoned name, involved in offering quality-centralized products from Thane(India).   More About Information of Slotted Type Ball Bearing Washer : IIS manufactures all types of Ball bearing Disc Springs both plain and slotted & Preloading Bearing Washers. Ball-Bearing Disc Springs are used with radial Ball bearings to minimize vibration and shaft deflection. Proper preloading will increase bearing rigidity and eliminate excessive wear & tear and running noise. Special Features of Ball Bearing Disc Springs Preloading Washers : Significant increase or decrease in applied force even with small variation in deflection.  Backlash compensation & regressive curves help reduce preload variations changes.  Very low force characteristics with very large deflection range.  Multiplication of force by stacking of two or more in parallel.  Available in all size to accommodate all Ball bearing sizes.  Elimination of noise and play in Ball Bearings.  Round shape ensures equal distribution of load around the bearing ring.   Slotted Type-At IIS, we are engaged in manufacturing, exporting and supplying the top quality Slotted Ball Bearing Disc Springs. These springs are commonly used to bear large deflection, backlash compensation, axial preload and minimize degree of stress. Besides, the provided Slotted Ball Bearing Disc Springs can be purchased from us at cost effective prices. In our stock, we have all standard sizes ranging from 9.8 up to 94.5 mm (0.386" - 3.72"). The Slotted Disc Springs have been manufactured for standard Ball Bearing application. These are designed to be fixed around the inside diameter.

IIS Manufactures & Supplies Shim & Support Rings DIN 988 Shim rings are developed to avoid machine components dynamic axially. The commonly application of shim ring to adjust the clearance or space between two parts. Support rings are used to ensure that do not deform when part to extreme dynamic axial load. Material Shim ring - Mild Steel Support ring - Spring Steel Surface FinishShim ring - Oiled Support ring - Oiled or Phosphated Hardness Support ring - 440 -500 HV10.

IIS Manufactures & Supplies Serrated Washers Serrated Washers are Disc Springs with Trapezoidal Cross Section on both sides for gripping. IIS serrated safety washers are ready to fit washers to sustain preload and avoid loosening. As the bolt is tightened the serrations crunch into the mating faces and prevents the screw from loosening up due to vibration. Also, the disc shape holds the necessary tension. They are available in various sizes to fit bolts or screws. The diameters for Serrated Washers are matched to screw dimensions. The outer diameter of washer is matched to the head diameter of screw head. This allows using screw and bolt including recessed heads, except countersunk screw.The advantages of Serrated Safety Washers are : : • Used for high vibration resistance due to positive rib contact. • Excellent pre tensioning. • Through proper radius selection, no splitting/cracking occurs during tightening.• The concentric force of the washer eliminates the chances of bending the fastener . • Extensive application and flexibility, minimizes stocks . 

Our organization is renowned as reliable distributor in the industry and based in the well-connected state of Maharashtra(India). Rely on us to buy the best in class Serrated Safety Washer; we are a notable Supplier in this domain.   The advantages of Serrated Safety Washers are : Used for high vibration resistance due to positive rib contact Excellent pretensioning Through proper radius selection, no splitting/cracking occurs during tightening The concentric force of the washer eliminates the chances of bending the fastener Extensive application and flexibility, minimizes stocks

Serrated Washers are Disc Springs with Trapezoidal Cross Section on both sides for gripping. lIS serrated safety washers are ready to fit washers to sustain preload and avoid loosening. As the bolt is tightened the serrations crunch into the mating faces and prevents the screw from loosening up due to vibration. Also, the disc shape holds the necessary tension. They are available in various sizes to fit bolts or screws. The diameters for Serrated Washers are matched to screw dimensions. The outer diameter of washer is matched to the head diameter of screw head. This allows using screw and bolt including recessed heads, except countersunk screw.

We are Manufacturing Serrated Lock Washer External & Internal according to DIN 6798 & as per Customer requirements . External serrated lock washer (Type A) -The teeth is at the outer diameter of the washer which supports to lock more area which reduces loosening. Internal serrated lock washer (Type J) -The teeth is at the inner diameter of the washer which is use for bolt or screw tightening.

IIS Manufactures & Supplies Serrated Lock Washer DIN 6798 We are Manufacturing Serrated Lock Washer External & Internal according to DIN 6798 & as per Customer requirements . External serrated lock washer (Type A) -The teeth is at the outer diameter of the washer which supports to lock more area which reduces loosening. Internal serrated lock washer (Type J) -The teeth is at the inner diameter of the washer which is use for bolt or screw tightening. 

Serrated Lock Washer DIN 6798 We are Manufacturing Serrated Lock Washer External & Internal according to DIN 6798 & as per Customer requirements . External serrated lock washer (Type A) -The teeth is at the outer diameter of the washer which supports to lock more area which reduces loosening. Internal serrated lock washer (Type J) -The teeth is at the inner diameter of the washer which is use for bolt or screw tightening.

We are Manufacturer, Exporter & Supplier Plain Ball Bearing Washer (Disc Springs for Preloaded Ball Bearing - Plain). Ball-Bearing Disc Springs are used with radial Ball bearings to minimize vibration and shaft deflection. Proper preloading will increase bearing rigidity and eliminate excessive wear & tear and running noise.

With diligence, hard work and dedication, we have worked our way up and become established provider in Maharashtra(India). The company is backed by a quality control wing that includes skilled quality inspectors who strictly check all the products before delivery.   Advantages : Avoids Loosening due to Vibration and Heavy Loads. Perfect Locking is achieved at any Preload Levels. When Maximum Safety is desired while Tightening Nut / Bolt. Easy to assemble and dismantle. Material : Prime Quality Spring Steel, Stainless Steel. Other Special material are available on request. Finish - Natural, Phosphated and Oiled.

IIS Manufactures & Supplies Hot Coiled Springs Hot-coiled springs are generally used in elevated temperatures, high load applications or in a corrosive environment. The transportation industry, Agriculture equipments manufacturers, and construction equipments manufacturers are some of the largest users of the hot coiled springs.   Generally springs with bar diameter greater than 12.7mm (0.5 in.) are hot coiled. Bars of carbon or alloy steel are generally used for hot-coiled springs. For most hot-coiled springs, finished hardness requirement is in the range of Rockwell C 44-53.    IIS can manufacturer hot coiled springs up to 92mm or 3.62 inch wire diameter and OD 450mm or 17inches.

Our wide area network helps us in delivering the products across Maharashtra(India) and other markets. Owing to our immense expertise in this domain, we have carved a niche as a Supplier of Hot Coil Springs in the market.