Laboratory Chamber Dealers in Ghodbunder Road, Thane

Innovative compact vertical models with front door and Italian design for corrosion testing.Vertical space saving test Chambers with large glass Front door for salt spray, Condensation tests andCyclic corrosion tests.   New compact and functional design Salt Spray Tests Condensation Tests Corrosionbox improves comparison with outdoor resultsWorldwide, materials used by manufacturing industry are exposed to natural or industrialcorrosion in shape of salt fog, humidity, smoke and vehicle exhaust. Laboratorycorrosion tests are used extensively for selection of materials and their surfaceprotection.Corrosionbox chambers are what you need to predict corrosion resistance of materialssuch as paints and coatings.   Salt spray testA corrosive solution is turned into a vapour mist through a nozzle located on the back side of the chamber. A fog diffusing structure distributes the fog over the entire test zone. The compressed air required for fog production is heated and saturated with moisture in a pressurized humidifier before it reaches the nozzle. One or more heating elements, depending on chamber capacity, ensure uniform temperature in the test chamber. Exhaust solution collected in the bottom of test chamber is drained away through a drain to the floor.Salt spray test can be executed with all chamber models.   Condensation water testTest chamber bottom is filled with demineralised water. Water is heated and evaporates condensing on the surface of samples. Chamber temperature is 40 °C. Continuous condensation test can be executed with all chamber models.Cyclic corrosion testA large number of cyclic corrosion tests are made possible by combining salt spray environment with condensation humidity and air drying . Cyclic corrosion testing has become increasingly necessary in recent years. Dry Corrosion is one of the most popular cyclic tests alternating salt spray and air drying. Cyclic tests can be executed with all enhanced model chambers. Depending on cycletype some options have to be installed during chamber manufacturing.  Chamber DesignChamber structure is overall 10mm thick Polypropylene. Option in PPS plastics to meet CSA flame test. Test chamber is insulated with a double wall. Access to the test chamber ismade through a window glass door. Control panel and all necessary control devices are on the rightside in ergonomic position. The Salt solution storage tank is on the left side. The electrical board is completely enclosed in a dedicated zone: next to it we find the electro-valves, humidifier and salt solution dosing pump zone. Each part is of easy access for simple and fast maintenance.   Basic model   Absolutely easy to use. The first step for test execution is to load timer with total test time (up to 9999 hours), second is to set test chamber temperature on the controller, then press Salt spray or Condensation push-button. During the whole time of the test, the timer counts down and its display will indicate decreasing time running to test end. To inspect samples, suspend test execution pressing Salt spray or Condensation push-button, then press ventilation push-button to drain testchamber before opening it.To resume test execution simply press Salt spray or Condensation push-buttonagain. When timer reaches zero test execution is finished   Enhanced modelFree programming, up to 15 different test programs, inputs via keyboard with soft keys and easy to use structure of the Menu. Test status is continuously displayed on the large LCD display with 4 lines of 20 characters each. Control and monitoring of test chamber and humidifier temperature, monitoring of nozzle air pressure and dosing pump RPH. Self-diagnostic including warning messages, alarm messages and safety shut down. Complete test report: chamber and humidifier temperature, nozzle air pressure and dosing pump RPH are periodically measured and stored inthe controller memory together with test interruptions or alarms. By simply pressing a key a complete report of the test is printed. RS232-C interface is provided for serial printer connection.   Cyclic test optionsEnhanced model control panel allows easy programming of cyclic test combining: Salt spray, Watercondensation, Dry off and Ambient condition. To perform cycling the test chamber must be completed with the following optional parts:   Option for Dry Corrosion, Scab Corrosion cycle. An air heater is installed to heat purging air before introducing it in the test chamber and a Titanium panel on the bottom of test chamber turns a flooded bottom into a dry bottom. Only a dry chamber bottom allows fast drying of the samples.Option for ASTM G85-98 annex 5 Prohesion. In addition to parts installed for dry corrosion a bypass is installed on the humidifier to meet standard requirements with respect to fog production.Option for ASTM G85-98 annex 4 salt/SO2 spray testing. An external SO2 dosing system is supplied and a gas diffusing device is installed in the test chamber

Also called as Environmental Test Chamber. Inner chamber is made of stainless steel. Outer body of mild steel duly powder coated OR S.S if required. The chamber is insulated by filling CFC free Polyurethane Foam in The space of between outré body and inner chamber to prevent temperature loss.

Homogeneous light in combination with a constant temperature and humidity is necessary to achieve ideal growth in plants or other organisms. A BINDER humidity chamber offers all this. This is how KBW Series growth chambers create ideal conditions for the culture using light and temperature. The KBF series also offers a system for humidity regulation.

Stability Chamber offered find application in creating ideal conditions for Industrial componentproduct research as well as for Bio technical specification tests. Featuring use of accurate as well as reliable chamber for long term high temperature as well as RH testing applications, these are made available in temperature range of 10 c to 60 c with accuracy of _ 0.5 c. These also feature relative humidity range of 35% RH to 95% RH with accuracy of - 3% RH. Here, a positive vertical air circulation also helps in ensuring uniformity in temperature and RH.

We are offering bacteriological lab incubator. with the assistance of skilled and dedicated professionals, we bring forth comprehensive range of technically upgraded range of bacteriological incubators. our products are available with adjustable controllers and are used in biological activities. These products are available with customized and standardized options and are specially designed to keep the diverse requirements of scientists and research scholars. features: • double walled construction inner chamber made of stainless steel ss 304 and outer chamber made of mild steel duly powder coated surface. • in between two walls sufficient glass wool insulation to minimize the loss of temperature. • temperature range 50c above ambient to 600c • temperature control accuracy +/- 0.50c • temperature is controlled by thermostat / microprocessor based digital temperature controller with pt 100 sensor • heating by the aid of micrometer wired elements fixed at the inner bottom side of the unit. • main door with glass window to view the samples kept inside fitted with ball & latch type lock. • removable type stainless steel perforated trays will be supplied along with the unit. • power supply 220-230 volts ac single phase chamber size in inches no. Of shelves 12”x12”x12” 2 14”x14”x14” 2 18”x18”x18” 3 18”x18”x24” 4 24”x24”x24” 4 24”x24”x36” 5 highly recommended: motorized blower for air circulation ensure the uniformity of the temperature throughout the chamber. documents provided: nabl calibration certificate for temperature controller. memmert models: specifications same as above, but the heating elements are fixed at two vertical sides of the inner working chamber. gmp models: specifications same as above, but with inner and outer chamber both made of stainless steel ss 304 grade.

Ozone Chamber, Mooneyline Viscometer

Constant Temperature Bath, Limiting Oxygen Index Apparatus