Laboratory Equipment Dealers in Ghodbunder Road, Thane

The Ray-Ran Test Sample Injection Moulding Press has been specifically designed to produce a wide variety of laboratory test samples such as colour plaques, tensile and impact test specimens as well as small components required for mechanical testing procedures. The unique low cost moulding machine has a compact design for vertical bench mounting making the apparatus ideal for Research and Development Institutes, Universities, laboratories and small workshops. The apparatus is pneumatically operated with inlet air pressures up to 10 bar (150 psi) which is adequate for moulding most materials including Polypropylene, Polyethylene and PET with injection pressures up to 450 bar (6500 psi)Digital temperature control up to 400 deg C melts the polymer which is then extruded into the mould. Digital tool block heating is included for more efficient polymer flow into the mould with temperatures up to 200 deg C to prevent freezing.The apparatus is supplied with a quick release cam operated tool block which will accept low cost tool inserts machined to any shape that will fit within the Standard Tool Block parameters. This makes the apparatus ideal if different samples are required from the same material with minimal wastage and time. Tool Inserts to suit any International Standard, e.g. ASTM, ISO, DIN, JIS, etc., can be supplied for tensile dumbbells, colour plaques, impact bars, etc. For samples that cannot be easily moulded within the standard tool block, optional specialised tooling can be supplied to customers requirements within the parameters of the machine.The unique interchangeable Cylinder Liner and Die assembly supplied as standard with the apparatus compliments the simplicity of the equipment during and after the moulding process as it enables the operator to change from one colour or material to another in just a few seconds, increasing production and eliminating the need for purging. Simply remove the cylinder liner being used and replace it with a clean one, wait for it to reach temperature, fill the liner with your new material and continue the moulding process. The used liner can then be cleaned at the operator’s convenience using a dedicated cleaning solution or ultrasonic cleaning bath. The 47cm³ capacity of the cylinder liner ensures multiple moulds can be made saving time and reducing valuable material wastage.To mould a test sample polymer is loaded into the top of the liner which is heated to the required temperature to plasticise the polymer. When the injection piston is released the cylinder liner nozzle automatically locks into the injection gate of the tool block and the piston extrudes the polymer into the moulding plate insert. After the polymer has been allowed to set for a few seconds, the tool block cam is released and the moulding plate insert withdrawn. The moulded test sample is then removed, the injection gate is cleaned of any residual polymer and the moulding plate insert replaced and clamped in the tool block ready for the next sample to be moulded. For a more convenient flow of polymer into the cylinder liner an optional polymer feeder hopper can be supplied so the liner is always topped up after each mould is produced ensuring a countless moulding process. Technical Specification Pneumatically operated Maximum Air Line Pressure: 150 psi/10 bar Maximum Polymer Pressure: 6500 psi/450 bar Maximum Shot Size: 47cm³ Maximum Sample Sizes 175mm (L) x 45 (W) x 12.7 (T) Digital Temperature Control Automatic Nozzle-to-tool Locking Device Cam-lock Tool Block Quick Change Cylinder, Nozzle & Die Visual alarms for Tool Locking 110v 60hz and 240v 50Hz Product user manual Traceable calibration certificate CE declaration certificate Optional Ancillaries Polymer Feeder Hopper Low cost moulding Inserts available to all International Standards Quick Change Cylinder, Nozzle & Die Air compressor Non standard tool block

• Material: Stainless Steel
• Capacity: 200kg per hour
• Automation Grade: Automatic
• Voltage: 240V
• Motor Power: 3.5 hp
• Phase: 3

Proper reinforcement is provided to the Pulverizer Sieves to withstand the impact generated by the hammer action of the blades. This special feature of our Pulverizer Sieves has gained them a lot of appreciation in the industry. We are known as the foremost Pulverizer Sieves Manufacturer and Exporter in India. Description The screen of our Pulverizer Sieves is passivated, micro polished and treated to give a crevice free, smooth, non sticky surface.

• Display: 4 Digit, 7-Segment LED Display
• Stirrer Speed: Controllable with Front Knob
• Weight: 12 Kg (Approx)
• Brand Name: B R Technologies
• TFT Screen: Available with high resolution camera for viewing capillaries
• Temperature: 0 - 300 Deg C
• Resolution: 0.1 Deg C
• Capillary Glass Tubes: 100 mm long, 0.8 to 1.1 mm internal diameter
• Boiling Point Glass Tubes: 6 x 75 mm glass tube
• Power: 230 V +/- 10%, 50 Hz. AC
• Dimensions: 370 x 290 x 290 mm (L x B x H) (Approx)

• Type: Soup Strainer
• Material: Stainless Steel
• Shape: Round
• Application: Soup Staining
• Color: Silver
• Feature: Corrosion Resistance, Durable, High Quality, Non Breakable, Rust Proof
• Surface Finishing: Polished, Power Coated
• Handle Material: Plastic, Stainless Steel
• Technics: Hot Dip Galvanized
• Brand Name: Goodluck

• Application: Bp
• Weight: 10-20kg
• Capacity: 20L/Hr
• Power: 100-200W
• Automation Grade: Manual
• Ambient: 0-180 Deg C 180-360 Deg C

Basket strainer consist of a removable Screen which can easily be removed from the top.Basket Strainer are used to trap suspended solids and particulate too large to be caught by most filter media. Basket strainer temporarily disrupt a system when cleaning is required. If disruption to your system is unacceptable, duplex strainers (2 basket strainer arrangement ) allow the system to run without any interruption by redirecting flow to an alternate basket when the other reaches capacity.

• Application: Breathing Use
• Warranty: 1yrs
• Ambient: 0-180 Deg C 180-360 Deg C
• Usage: Safety
• Set Weight: Approx. 9.8 Kg

Self - Contained Air Breathing apparatus are very essential for heavy toxic leaks. Manufactured as per IS: 10245, Part-II. Available in 30 minutes or 45 minutes duration with all Test Certificates.

Aniline point is used to characterize pure hydrocarbons and to indicate the aromatic content of hydrocarbon mixtures. Equal volumes of aniline and sample or sample plus n-heptane are stirred together while being heated at a controlled rate. After the two phases become miscible, the mixture is cooled at a controlled rate and the temperature at which the two phases separate is the aniline point or mixed aniline point of the sample.

Conical strainer are commonly used in pipelines to prevent damage of Gauges, pumps, control valves, Flow meters and other process equipment. Fabricated Conical strainers from 2” to 24” (larger sizes are available) Designed in accordance with ASME Section VIII Div. 1. Standard design pressures include 150#.

This test method describes the measuring and observing the relative amounts of smoke obscuration produced by the burning or decomposition of plastics. It is intended to be used for measuring the smoke producing characteristics of plastics under controlled conditions of combustion or decomposition. The measurements are made interns of the loss of light transmission through a collected volume of smoke produced under controlled, standardized conditions.

The Jolt Test Apparatus Offered By Us is Used for Testing Purposes in Explosive Manufacturing Packaging Industries. the Jolt Test Apparatus that We Offer Helps in Establishing the Ruggedness as Well as Safety of Fuze Designs Even During the Adverse Conditions.

Our organization is involved in manufacturing COD Digester that is widely demanded for its excellent performance, consistent operations and a reliable service life. It is specially designed COD Dig-ester for COD method for monitoring waste water in fluent and industrial process water. These are fabricated using quality graded materials and are available at reasonable price. COD Dig-esters is suitable for COD method for monitoring waste water effluent & effluent, industrial process water & more this instrument is used by Pollution Control Labs VARIOUS MODELS ARE AVAILABLE with cooling facility.  

We are offering muffle furnace is light weight with ceramic fibrewool insulation and fast heating equipment. This muffle furnace is mostly used for ashing, fashions, lgniting and heat treating of small parts in chemical, industrial field and colleges. specifications :  outside body made up of heavy gauge m.s. With powder coated and inner muffle with high temp. Insulating material.  maximum working temperature is 9300c/11300c.  temp. Controlled by digital temperature controller cum indicator.  heaters are made of nichrome wire, uniformly wound on the muffle.  control panel fitted on bottom of the units with indicating lamps, switches, digital controller and sensor.  a special solid state silver fuse is used for protection to heater in case of overheating.  working on 230 volts, single phase, 50 hz. size in inches rating 9”x4”x4” 1.6 kw 10”x5”x5” 2.0 kw 12”x6”x6” 3.5 kw 18”x9”x9” 6.0 kw

• Size: 13 mm 25 mm 47 mm 3 Branch Sterility 47 mm 6 Branch Sterility 47 mm
• Material: heavy duty stainless or mild steel
• Per pack: 10pcs

• Size: 15 MM to 600 MM
• Body: C.I. / WCB / CF8 / CF8M
• Screen: Brass / SS 304 / 316
• Ends: Scr / SW / Flanged End

Y strainers are a cost-effective solution for the mechanical removal of unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. They are used in pipelines to protect pumps, meters, control valves, steam traps, regulators and other process equipment.

We are offering sugar analyzer. Young lin sugar analyzer is used for analysis of sugars using evaporative light scattering detector(yl9180 or yl9181 elsd). Sugars are generally analyzed by hplc with refractive index detector. However, the analysis method using ri detector has some limitations, such as low sensitivity, or the difficulty of simultaneously analyzing various sugars.

One of the suppliers of industrial products, providing various types of products such as general lab equipments

Potentiostat, MHZ Impedance Analyzer

We are leading manufacturer, supplier and exporter of huge range of scientific lab equipment.

Strainers, Sterilizing Grade Filters, Cellulose RBC Filter

Strainers, Milk Can, Coffee Warmer

Centrifuges, lab rotator, lab shaker

Dissolution Testers, melting range apparatus, visual melting range apparatus

Metallurgical Surface Preparation Equipments, hardness tester

ablet physical testing Apparatus, tablet dissolution apparatus, food

Quartz Distillation Apparatus, Industrial Glassware, quartz apparatus