Lakshmi Electrical Industries Wagle Estate, Thane, Maharashtra

Medium Wave Infrared (Quartz) Heaters consist of a helically wound resistance coil housed in a pure vitreous silica fused quartz tube. The Quartz tubing is terminated with specially designed insulating caps, which are securely fastened to the quartz tube with high temperature cement providing excellent support to the power connecting termination. Quartz Heaters are designed to be used in a horizontal position only. Quartz Heaters are available in various diameters like 8,10,12,15,19 mm & length 300 to 1500 mm.

The FSG range of heating Cables is recommended for Refrigeration industry to protect against freezing and to maintain moderate temperatures. To ensure that these heating elements enjoy a long service life it is recommended to use a suitable control device.Features: Can be cut to size.Will not self-destruct by overheating.Power supply 230VAvailable in 10, 15, 25, 30W/m at 10 degree Celsius.Applications: Heat Seals for Doors in Cold room with Tape heaters, Heat Cables, Heating tapes.We also make custom designed Fibreglass Tape heaters for various heating applications.

Water heater with Thermostat is commonly used in many chemical, petroleum and water based applications. Consisting normally of a BSP rated flange with one or few hairpin elements or bugle tubular elements extending from the face of the flange, this electric heater uses direct heat application to the liquid medium. The Thermostat is inserted in a thermowell and helps in maintaining the set Temperature of the liquid medium. It also helps to preventing overheating and, offers protection to the heater as well.

Construction: Sheathing: This type of heaters has quartz silica tube closed from bottom. Bobbin heaters are inserted through the tube and terminal wires are mounted on the top and encased in a Rubber cap for Electrical safety. It issuitable for vertical installationonly.  

Sheathing: This type of heaters has quartz silica tube closed from bottom. Bobbin heaters are inserted through the tube and terminal wires are mounted on the top and encased in a Rubber cap for Electrical safety. It issuitable for vertical installationonly.

nfrared heat is transmitted directly in the form of electromagnetic rays, at a velocity of approx. 300,000 km/sec: i.e. at the speed of light but is also suitable for particularly demanding applications such as Vacuum technology and clean room conditions. Infrared heat is particularly economical on energy as compared to other heat sources because it acts quickly, directly on products. Short Wave IR emitters are suitable for all applications in which the attainment of high temperatures in the shortest possible time.   Lakshmiheaters Manufacturers & Exports CIR Infrared Heaters, Infrared Lamps, Infrared heating lamps, Ceramic Infrared heaters, Ceramic Infrared Heating Elements, Industrial Infrared heating, Energy Efficient Infrared Heaters, Quartz Infrared heaters, Short Wave Infrared heaters, Medium Wave Infrared heaters, Infrared heating Modules, Infrared heating panels, Quartz Space heater, Twin Tube Medium Wave Infrared heaters, Radiant heaters and Quartz Infrared heater Elements. Application Heaters for PET preform heating in stretch blow molding machines. Heaters for Soldering fusing in PCB industries. Heaters for Sterilizing. Heaters for Ink drying in offset printing machines. Powder /Paper coating drying/curing heaters. Heaters for Rubber coating & drying. Screen printing . Heaters for Paint baking

Coil Heaters: The versatile Lakshmiheaters Coil Heaters Micro tubular heaters can be formed into a variety of shapes to fit into many applications. Lakshmiheaters Manufacturers & Exports Coil Heaters, Injection molding heaters, Injection molding heating Elements, Coil heater elements, Mould heaters, Runner Heaters, Mini coil heaters, Cable heaters, Coil Heating Elements, Sprue Coil heater and Nozzle coil heaters.

Coil Heaters Micro tubular heaters can be formed into a variety of shapes to fit into many applications. Lakshmiheaters Manufacturers & Exports Coil Heaters, Injection molding heaters, Injection molding heating Elements, Coil heater elements, Mould heaters, Runner Heaters, Mini coil heaters.

Mica Band Heater, Nozzle Heater.LEI™ Mica Band Heaters are sheathed with plated C.R.C.A. / Brass or Stainless Steel sheets. Heaters are provided with 1.5mm asbestos insulation and stainless steel cover. The heating Element (Windings) is of high quality Nickel-Chromium resistance wires. Heaters are available in One-piece and Two- peice designs.   LEI™ band heaters with EXPANDABLE design feature allows the heater to be opened for installation over the barrel without causing internal damage to the windings. Heater Terminals are properly placed so as to avoid cold spots.   Heaters with various Terminal Options are also available: Flexible Wire/Pin Socket and screw terminals.   Clamping action for the heaters are provided by either bent-up flanges (ears) or bolted Angle system.   Applications: Extruders Blow Molding Machines Injection Molding Machines Blow Film Dies and Various Cylindrical applications.

A drum heater provides a practical, efficient means of protecting your drums from freezing, controlling viscosity, or warming up and maintaining an elevated temperature of materials within a drum. Lakshmiheaters Drum heaters are typically Mica Band heaters with built in Energy Regulators. They are hinged so as to facilitate faster clamping & removal. They are ideal to heat all types of metallic Drums.

Laundry Irons manufactured by us has found wide usage and acceptance in Garment, Textile, Hospital & Hotel industries. The construction of our Laundry Irons Tailor Irons incorporates: The best quality heating element made out of imported wires. Thick BrassStainless Steel plate 5mm thick at the bottom polished to mirror finish. Strong Bakelite handle. Heavy Duty brass pins, Earthing cup for electrical connections. Aluminium painted cast iron upper body. Laundry Irons Tailor Irons is available in 8 & 14, pounds in weight.

Power : 1000W x 230V.

Industrial water heaterFinned strip heaters are used for both forced (mounted in ducts) and natural convection air heating (mounted at the bottom of cabinet type oven). The fins provide maximum surface contact for good heat dissipation into the finned cross section thus resulting in rapid heat transfer to the air. Lakshmiheaters Manufacturers & Exports Strip Heaters, Finned Strip Air heater, Industrial Air Heaters, Air Preheater, Air Process Heaters, Industrial Air Heaters, Air Heater Elements, Finned Air heaters, Air Heating Elements, Finned Heaters, and Finned Heater Elements, Oven Heater, Oven Heating Element, Radiant Heaters, Outdoor heaters and Clamp On Heaters.

Ceramic Refractory insulated Strip heaters are sheathed in rust-resistance steel or in stainless steel sheath as it provide physical strength and good thermal conductivity. Specially selected and designed ceramic insulator houses the resistance wire insulating it from the outer sheath. Finned strip heaters are used for both forced (mounted in ducts) and natural convection air heating (mounted at the bottom of cabinet type oven). The fins provide maximum surface contact for good heat dissipation into the finned cross section thus resulting in rapid heat transfer to the air.

Lakshmiheaters Manufacturers & Exports Strip Heaters, Finned Strip Air heater, Industrial Air Heaters, Air Preheater, Air Process Heaters, Industrial Air Heaters, Air Heater Elements, Finned Air heaters, Air Heating Elements, Finned Heaters, and Finned Heater Elements, Oven Heater, Oven Heating Element, Radiant Heaters, Outdoor heaters and Clamp On Heaters.

Lakshmiheaters manufacture custom Heating Elements for heat guns & hot air tools that allow you to activate adhesives or heat shrink tubing, with other applications ranging from curing, drying, welding, sterilizing, soldering, paint removal, auto repair, thawing, and more.Consult factory for specific requirements.

Lakshmiheaters Manufacturers & Exports Thermocouple, Sensors, J Type Thermocouple, K Type thermocouple, PT-100 Thermocouples, Plastic Industry thermocouples. RTD sensors, Furnace Thermocouples, Oven Thermocouples, Thermocouples for Plastic Industries and Temperature Probes. Capabilities include : All type of thermocouple sensors. RTD and thermostat sensors.

Heating and Cooling Combination Heaters are used on Extruders and Blow Moulding Machines where Temperature has to be precisely maintained. Once the desired temperature is attained the blower starts blowing Air thereby taking away any excess heat that is generated. It is 65% open by perforated metal sheet which ensures maximum surface exposure for better cooling.The fins attached to the heater ensure 100%forced circulation of air. Advantages of air cooled operation includes lower cost, easy replacement, low maintenance, no leakage problem and uniform temperature control.  

Lakshmiheaters manufactures custom made Furnace Elements & Coils used in furnaces for annealing, brazing, non-ferrous melting & holding, salt bath, hardening, draw, temper and carbonizing applications. With a custom designed element, heat distribution can be specifically located to apply the heat where it can achieve the best results. Depending on the KW required, the elements will be made in either a large or small configuration. Mounting of these elements is simple, and can be horizontal or vertical, depending on the specific applications.  

Flanged heaters are commonly used in many chemical, petroleum and water based applications. Consisting normally of an ANSI rated flange with several hairpin elements or bugle tubular elements extending from the face of the flange, this electric heater uses direct heat application to the liquid medium. Flanged heaters allow the flexibility of using many different alloys to help resist corrosion and maintain life longevity of the flanged heating element. Steel flanges are typically used for lubricant oils, heavy and light oils, waxes as well as mildly corrosive liquids and low flow gas heating.

Flanged heaters are commonly used in many chemical, petroleum and water based applications. Consisting normally of an ANSI rated flange with several hairpin elements or bugle tubular elements extending from the face of the flange, this electric heater uses direct heat application to the liquid medium. Flanged heaters allow the flexibility of using many different alloys to help resist corrosion and maintain life longevity of the flanged heating element. Steel flanges are typically used for lubricant oils, heavy and light oils, waxes as well as mildly corrosive liquids and low flow gas heating.  

Flanged heaters are commonly used in many chemical, petroleum and water based applications. Consisting normally of an ANSI rated flange with several hairpin elements or bugle tubular elements extending from the face of the flange, this electric heater uses direct heat application to the liquid medium. Flanged heaters allow the flexibility of using many different alloys to help resist corrosion and maintain life longevity of the flanged heating element. Steel flanges are typically used for lubricant oils, heavy and light oils, waxes as well as mildly corrosive liquids and low flow gas heating.

Ceramic Refractory insulated Strip heaters are sheathed in rust-resistance steel or in stainless steel sheath as it provide physical strength and good thermal conductivity. Specially selected and designed ceramic insulator houses the resistance wire insulating it from the outer sheath. Finned strip heaters are used for both forced (mounted in ducts) and natural convection air heating (mounted at the bottom of cabinet type oven). The fins provide maximum surface contact for good heat dissipation into the finned cross section thus resulting in rapid heat transfer to the air.