Level Transmitter Dealers in M. G. Road, Thane

• Material: Metal
• Range: Up to 20 Bar (200 Mh2o)
• Accuracy: 0.1%FS, 0.2% FS, 0.4 %FS and 1%FS.
• Material: Stainless steel submersible
• Quick response time: < 25 to 30 ms
• Output: 4 ... 20 Ma and Voltage Outputs

This Instrument are a pressure transmitter available in 4 ... 20 mA current loop or in voltage output signal versions. This transmitter offers a very high accuracy over a wide temperature range, an excellent repeatability and very long term stability.The piezo-resistive silicon sensor is anodic bonded on a very stable glass base, which is attached to a stainless steel construction. This assembly guaranties an excellent thermal isolation.The sensor is isolated from the process by a stainless steel diaphragm (1.4435 / 316L) and a filling liquid. The electronics is located within the hermetically sealed transmitter housing which give the Instrument an excellent resistance to shock and vibration. Protection class IP 68.Because these are small and submersible is universally suitable for all kinds of hydrostatic level measurements. It is the ideal product for environments such as in the food and beverage industries, water level measurement and all kind of standard industrial and processing applications.External zero setting ATEX II 1G, II 2G and II 1D Lloyd‘s Register Approval High long-term stability Excellent repeatability

We have Radar type Level Transmitters. We have both the types - Insertion Probe type Radar Level Transmitters and Non Contcat type Radar Level Transmitetrs. Features : Self Adjusting Tracking Radar Programmable (recommended) and Simple push-button calibration Output 4-20 mA 20-4mA (Isolated on 4 Wire Model's only ) Optional RS232 OR RS485 For communications with calibration diagnostics & data logging software PL Compatible (Modbus RTU) Three or four Wire Operation Application: 1) Food and Beverages Water Wastewater Chemicals with vapors 2) Solids with Dust Powder

• Brand Name: NK Instruments Pvt Ltd
• Type: Rigid
• Usage/Application: Level Measurement of liquid in the tank
• Material: SS, PP or any Alloy
• Ambient Temperature: 60 degree C
• Voltage V: 24 V DC
• Temp Press: standard version
• Process Connection: Threaded or, Flange type

Self Adjusting Tracking Radar Programmable (recommended) and Simple push-button calibration Output 4-20 mA 20-4mA (Isolated on 4 Wire Model's only ) Optional RS232 OR RS485 For communications with calibration diagnostics & data logging software PL Compatible (Modbus RTU) Three or four Wire Operation Application: 1) Food and Beverages Water Wastewater Chemicals with vapors 2) Solids with Dust Powder

• Frequency: 50 To 60 Hz
• Accuracy: 0.2 % FS
• Country of Origin: Made in India
• Measuring Range: 0-50 M
• Pressure Unit: 0-5MPa
• Voltage V: 12 to 36 V DC
• Temperature Unit: -40 to 80 degree C

We offer Capacitance Type Level Transmitter. Advantage : fast & easy installationservice : for all types of liquids (temp up to 150 degree c)working principle : capacitance accuracy : 1% fsdmounting : from top of the tank level indication : digital through head mounted or remote indicatormax.sensing length of the transmitter : 3 meters sensor moc : pfte coated ss 316 process connection : threaded, flanged or, triclover connection electrical terminal housing : weather proof aluminium or, flameproof output of the transmitter : 4 to 20 mapower supply : 230 v ac, 110 v ac or, 24 v dc (pl. Specify) max. Fluid temp. : up to 150 degree c max. Fluid pressure : 10 kg/cm2 application : for accurate digital liquid level indication and control. If temperature is continuously varying, capacitance level indicators are not recommended.

(Model No. LLT - 01)   Principle of operation :This is level transmitter - employing magnet embedded float. The magnet embedded float buoys Up along with the level rise & it cuts in or cuts out a series of resistors kept sealed inside a stem. The out put which us current signal of 0 -20 or 4-20 mA is transmitted to remote area i.e. Say Pump room or control room.Electronic unitInput supply : 230 V AC 50 HzOutput : 4-20mA, 3 wire typeAccuracy :+/- 20mm of the total rangeIndicator : Will be Box Type analogues meter or Digital display, reading in cm & Alarm : Hi-Low, Contact - NO-C-NC, Weather Proof & Flame Proof as per requirement. Display Panel Box can be Mounted any where as per like place Operator Room, Plant control Room, even more distance from Tank. It gives very clear Level Indication in Digital FormatAccuracy : +/- 1% of total range

• Range: 50 To 2000 mm
• Out Put: : 4–20ma @ constant current load of 500 Ohms

new generation capacitance based level transmitter for any type of liquids. “ELTRAN” is based on the physical properties of capacitor.The sensor selection is based on the type of liquid and can be measured from 50 mm to 2000 mm with rugged probe and above 2000 till 10000 flexible probe are used.

We are one of the foremost manufacturers and suppliers of a comprehensive assortment of Level Transmitter. Our range is appreciated for higher degree of accuracy, precision & compact design, durability and longer service life. This is more reliable techniques for continuous level indication and controlling of any liquid, since it is add on magnetic level indicator, has no direct contact with actual liquid. Hence – there is no question of corrosion, Sp. Gravity, temp, pressure, for smooth operation, this sensor tube is magnetically actuated with movement of magnetic float / tip.Construction & Working:The sensor tube is manufactured from non magnetic material to achieve undisturbed flux. it contains chain of reed switches & resisters. A magnetic float are tip tracks the level & activates reed chain. The change in resistance is in proportional to level & same is converted into 4-20 ma current by loop power transmitter and LCD unit indicates the reading.Technical SpecificationElectrical:Sensor – resistiveResolution – 10 mmAdjustment – Zero for 4, full for 20 maInput – 12 to 30 V DC (From Loop)Output – 4 - 20 ma, 30 mA MAX.Wiring System – 2 wireResistive Load - < 750 ohmsEnclosure – Die Cast Aluminum ( LM-6 )Cable Entry – ¾ ET, ½ NPT / BSPProtection– IP 65 / FLP IS -2148 GR II A II BInstallation – On top & side mounted level indicator.Max Range- 0-3 MTRS.Option : With or Without HART Protocol Indicator Unit:Display- 3 ½ Digit. 7 segment LCDPower Supply - 230 ACHousing Panel mounting: cut to size 96 x 96Set Points: Multiple alarm relay  

Level Transmitters, Pressure Gauges, conductivity indicators

Level Transmitters, Process Control Instruments

Level Transmitter, Flow Nozzle, PH And ORP Transmitter, pH Meter

Level Transmitters, Float Switches, Cylindrical Flow Indicator

Level Transmitter, Tubular Type Level Indicators, Level Switches