Limit Controller Dealers in Thane

• Certification: ISI Certified
• Voltage: 24-48 VDC
• Accuracy: +/-5 MV @25 Deg. Cel.
• Current: 10 A
• wide range: 0-1000 MV
• Pole Type: Double Pole, Single Pole
• Single Type: Double Throw, Single Throw
• Setpoint: 1000-1000 MV

• Input: ONE UNIVERSAL Input Thermocouples : J,K,T,R,S RTD's : PT-100, PT-1000 DC mA : 0 – 20 mA, 4 – 20 mA (Maximum 12 Volts) DC mV : ± 50 mV, ± 100 mV, ± 200 mV, ± 250 mV DC Volts : ± 1V, ± 3.3V, ± 5V, ± 10V
• Range: Refer 'table A''
• Ambient: Compensation automatic, ambient 0-60°C
• Resolution: 1 or 0.1 or .01 or .001 programmable
• Display: Super bright in 4 + 4 format , with NO BLINK programming technique Upper 4 digits 0.5" red colour Lower 4 digits 0.39" green colour
• Ananciation L.E.D's: 7 L.E.D.'s , 3 mm , multi colour, 3 for O/P's, 1 each for A/M, Alarm, Profile, Soak Time
• Parameter Setting: By soft touch, Elegant, Sturdy membrane keys & User friendly menu driven software
• Outputs: THREE, Programmable outputs with modular attachments Relay module SSR module 4-20 mA module Retransmission module
• Note: Output modules are predefined All three outputs can be assigned as relay or SSR or 4-20 mA, this means at a time either 3 relays or 3 SSR's or 3 4-20 mAs outputs also available
• INPUT Control Outputs Rating: Relay SPST 230V / 3 Amp, 12 volts DC pulses for , 4-20 mA (Load 450 ohms)
• CONTROLS:  
• Control Action: PID / On-OFF / TP PID P = Propotional Band = 1.0 to 999.9 units adjustable I = Integral = 0 to 3600 ( 0-1200) seconds adjustable D = Derivative = 0 to 500 seconds adjustable CT = Cycle Time = 0.5 to100 seconds adjustable On-OFF Hys
• Control Action Assign: PID for O/P 1 and O/P 2 ON-OFF for O/P 1, O/P 2 , O/P 3 T/P for O/P 1, O/P 2 , O/P 3
• Control Modes: Heat / Cool / Heat-Cool
• Overshoot Control: Provided
• Soak Timer: Assigned for O/P 2 or O/P 3, Soak Timer programmable (HH-MM or MM-SEC) Set Point Start up or Power on start up
• Manual Output: Provided, 0 to 100%
• ALARMS: Assigned for O/P2 and O/P3 Alarm Types : Low / High /Band /Deviation / End of Profile Alarm Acknowledge : Latchable / Unlatchable Alarm Inhibit : Available
• Retransmission: 4-20 mA or 20-4 mA or 0-20 mA or 20-0 mA programmable, Non-isolated, Retransmission assign for O/P 2 and O/P 3 Provided on request
• Communication: RS485, 2-Wire, Half duplex RS485 MODBUS on request, MODBUS RTU or ASCII Baud Rate Programmable 1200/2400/4800/9600, contact factory for higher Baud Rates
• PROFILER: 2 Profile Programmes / 8 Segments Each Each segment programmable for either RAMP or SOAK Profiler can be configured as : - RAMP/SOAK - RAMP/RAMP - SOAK/SOAK - SOAK/COOL Soak Time programmable in HH-MM , MM-SEC Overshoot control during

Humidity control system is normally required to control the humidity air conditioning system in pharmaceutical production area to avoid moisture ingression in product. This helps to improve or maintain product quality. It is must in FDA approved pharmaceutical companies. We design and supply humidity control system for air conditioning for hospitals, as well as for pharmaceutical companies, etc. Provide designed and detailed engineering as per customer requirement for Humidity Control system, for Air Conditioning, Capacity Enhancement in for Humidity Control system, for Air Conditioning, Humidity Control system, Revamping for energy efficiency as well as for product quality improvement, Providing preventive as well as break down maintenance services for Humidity Control system.

we are offering speed controller for eddy current drive. speed controller for eddy current drive is a closed-loop speed feedback from an ac tacho generator of 48 poles, integrally mounted to the drive. speed is maintained to the set value, despite load changes. electronic speed controller is common for drives up to and including 75 hp. standard features include soft start 0-30 sec, preset overload limit and operator controls. specifications: input: 240 v. ac; ±15%, 1f output: 85 v dc(nom), 5a speed holding: better than 2% onoff: switch with indicator set speed: potentiometer, single turn or 10-turn helical with dial. speed indicator:analogue or digital ambient:50°c construction: wall desk mounting torque controlis easy and straight forward. the intrinsic nature of an eddy current drive lends itself admirably to applications as constant torque or constant tension winding or unwinding. specifications: input: 240 v. ac; ±15%, 1f output: 85 v dc(nom), 5a torque stability: better than 0.2% onoff: switch with indicator set torque potentiometer, single turn or 10-turn helical with dial. torque indicator:percentage analogue ambient:50°c construction: wall desk mounting.

• Country of Origin: India
• Feature: Heat Resistance, Stable Performance
• Voltage: 220V
• Display Type: Digital
• Theory: Bimetal Thermometer, Temperature Controller
• Frequency: 60Hz
• Current Type: AC, DC

• Brand Name: Niksu
• Voltage: 440 V AC
• Country of Origin: Made in India
• Phase: Three Phase
• Usage/Application: Industrial
• Current: 2 A
• Material: Mild Steel
• Flash Memory: 64 Kb

• Country of Origin: Made in India
• Body Material: Stainless Steel
• Brand Name: BHARTIYA
• Model Name/Number: TCW-09-230 & TCW-09-110
• Automation Grade: Automatic

• Type: Automatic
• Voltage: 230 V
• Frequency: 50/60 Hz
• Usage: Tube Expansion of Heat Exchanger Tubes
• Weight: 7.5 Kg
• Trip Time Adjustment: 2 - 10 Sec
• Flash Memory: 64 Kb
• RAM: 1 Kb Built in

• Usage/Application: CNC controller
• Screen Type: LCD
• Current: 1 A
• Pole Type: Single Pole
• Throw Type: Single Throw

Speed Controller, mosquito killer machine, roof top solar power plant

Digital Torque Controller, Tube Expanders, Grooving Tools, tube cleaners

We have been in the manufacturing of different types of Conductivity Indicator and gained a lot in very short span of time. with our prime objective of customer satisfaction with superior quality product we always deliver items on time and at most competitive prices.advantage : digital indication of conductivity is possible online.service : for all types of liquidsworking principle : conductivityaccuracy : 1% fsdmounting : inlineindicator mounting : onlineconductivity indication : digital through head mounted indicatorrange of conductivity measurement : 0 to 4, 0 to 40, 0 to 100, 0 to 2000 µscm sensor moc : ss 316sensor rod moc : ppmoc of inline fitting : absprocess connection : hose connectionindicator housing : weather proof ip 65 power supply : 230 v acmax. Fluid temp. : up to 60 degree c max. Fluid pressure : 4 kgcm2 application : for accurate indication of conductivity of fluid passing through the pipeline.

ph controllers, solar battery chargers, Solar Lighting, Plating Rectifiers

Ph Orp Controller, block heaters, Sulphur Analyzer- Horiba, Sulphur Analyzer

multi loop pid controllers, Panel Pc, Industrial Pc

Pulse-train Motion Controller DVP-PM, High Torque Stepper Motors

Vaccum Controller, Industrial Rotary Evaporator, Photochemical Reactors

pid controllers, Data Loggers, directory listing services

Demand Controllers, Panel Meter, suitable load analysis equipments

universal temperature controller, indicator, Temperature Controller cum Timer

pid controllers, Flow Nozzle, Conductivity Meter, pH Meter

controllers, analytical instrumentation, Pumps

Speed Controllers for Eddy Current Motors, Torque Analyzers

controllers, Glass Tube Rotameter, Metal Tube Rotameter

controllers, plugs, Sockets, Connectors, Relays, Laser Marking Machines

Pid Temperature Controller, Liquid Level Controller, Level Sensor

Single Axis Motion Controller, Motion Control Board